Get all the room you need inside your car by putting your bikes, cargo or kayak on your rooftop. Thule, Yakima and Rola roof racks are built to the highest quality specifications to accommodate all your cargo needs.
Thule and Yakima offer roof bike racks in the traditional fork mount style or in the easy to load, wheel mount style.
Cargo baskets from Rola, Yakima and Thule offer a great looking way to get your cargo out of your vehicle and safely carry it on your trip. Roof cargo bags and roof boxes can also be used if you would like some waterproof or water resistant protection for your cargo.
If you need to carry bulky skis, snowboards, kayak or a canoe, putting it on the roof is a great option to unclutter your vehicle and keep the gear safe. We offer Yakima and Thule ski racks and watersport carriers that are sturdy and safe for all your cargo needs.
What our customers are saying:
Thanks for the info and fast service.
David
Sylvania, GA
We offer custom fit roof racks from Thule, Yakima and Rola that will be a perfect fit for your vehicle. Just enter your year make and model above. We also offer a full line of roof rack accessories, including roof bike racks, roof cargo baskets, roof cargo boxes, kayak and canoe carriers, roof bags, ski racks and snowboard racks. If you need to do some roof rack repairs, we also carry replacement parts for all the roof and cargo racks.
Roof Rack Manufacturers
Yakima Q Tower Roof Rack Installation - 2013 Hyundai Sonata
Thule AeroBlade Traverse Roof Rack Installation - 2012 Ford Fusion
Thule Traverse Roof Rack Installation - 2013 Hyundai Sonata
Today on our 2013 Hyundai Sonata, we'll be test fitting the Thule roof rack system. We'll be using the 58" square load bars, part number THLB58; the traverse foot pack, part number TH480; and the fit kit specific to this vehicle, part number THKIT1577. To install the roof rack, first we'll open the driver and passenger side doors in the front. We'll set our front load bar up on top of the roof line, and check the instructions for the measurement to properly set the bar. We need to measure 13-3/8" from the edge of the windshield to the leading edge of the traverse foot on either side of the vehicle. Once we have the bar into position, we'll fit our clamps against the roof line of the vehicle, and use the included AcuTight wrench to tighten it down.
Thule AeroBlade Traverse Roof Rack Installation - 2013 Hyundai Sonata
Today on our 2013 Hyundai Sonata we'll be installing a Thule AeroBlade Roof Rack. We'll be using the 53 inch AeroBlade bars, part number tharb53, the Rapid Traverse Feet, part number th480r and the Fit Kit for our vehicle, part number thkit1577. To install the roof rack the first thing we need to do is open the front doors on both the passenger and driver side. Once we've done that well take the bar and set it up on top of the roof and use the instructions to properly measure and space the bar on the vehicle.To position the front bar we need to measure 13 3/8 of an inch from the edge of the windshield to the leading edge of the Rapid Traverse Foot. We'll do this on both the passenger and driver side. With the front bar in position we'll use the included AcuTight wrenches to tighten it down according to the instructions.
Whispbar Rail Bar Roof Rack Review - 2007 Honda Pilot
Today on our 2007 Honda Pilot, we'll be test fitting the Whispbar rail bar roof rack for raised factory side rails, part number WB-S46. We'll begin our test fit by placing the front cross bar on the front part of our side rails. Once we have this in position, we need to make sure that the bar is lined up on each side. To do this, I found a fixed point on the side rail and made sure that I put each foot pack on that fixed point on both sides. Once we have the bar in the correct position, with the feet around our side rails, we can then go ahead and use the included Allen key to tighten down each foot. Once we have the cross bar secured to our side rail, we can then go ahead and place the cover back on and lock it into position.
Thule AeroBlade Crossroad Roof Rack Installation - 2008 Mitsubishi Outlander
Today on our 2008 Mitsubishi Outlander we'll be test fitting the Thule AeroBlade Roof Rack System using load bars 53 inches in length, part number tharb53 and the Thule Rapid Crossroad Roof Mounted Railing Foot Pack, part number th450r. We went ahead and pre-assembled the foot pack to our load bars.Now we're ready to go ahead and place the first half of our roof rack on top of our side rails. Once we have the foot packs set on top of our side rails we'll go ahead and bring the rubber coated steel strap underneath each side rail. To make sure that we have the foot pack in the right location there's an arrow indicator on the foot pack that should be lined up with the center of our side rail.Now we want to make sure that the overhang on each side of our vehicle is identical. What Ill do is Ill measure to make sure that I have the same overhang on both the driver side and the passenger side of the Outlander. One of the things that we need to make sure is that these bars according to Thule's instructions need to be a minimum of 24 inches apart.
Thule AeroBlade Crossroad Roof Rack Installation - 2013 Volkswagen Touareg
Today on our 2013 Volkswagen Touareg, well be test fitting the Thule Crossroads Aero Blade Roof Rack System, part numbers THARB53 and TH450R. Now our vehicle is equipped with factory raised side rails, so to begin our test fit, well place the front crossbar onto the vehicles side rails. Well then measure from a fixed point on the side rail on both the passenger and drivers side of the vehicle to make sure that the crossbar is perpendicular to the vehicle. Once we have established this position, we can remove the end caps of the feet and bring the rubber coated steel straps around the underside of the crossbar and hook them into position. We will then want to make sure that, the overhang of the Aero Blade is equal on both sides of the feet. After doing so, we can use the included tensioning tool to tighten down the feet to secure the crossbar to the vehicles raised side rails.
Thule Crossroad Roof Rack Installation - 2012 Jeep Liberty
Thule AeroBlade Crossroad Roof Rack Installation - 2012 Jeep Liberty
Today on our 2012 Jeep Liberty, we'll be test fitting the Thule Rapid Crossroads roof rack system, using part numbers THARB53 and TH450R. Now to begin our test fit, we've already gone ahead and assembled the cross bars according to the instructions, so we'll start by placing the front cross bar on top of our factory-raised side rails. Now we'll want to make sure that the rubber-coated steel strap goes underneath the side rail, as this is how the foot attaches to it. We'll now take a measurement from a fixed location on the side rail. We'll do this on both sides of the vehicle to ensure that the cross bar is perpendicular with the side rail, making it easier to load your accessories. We can then take the included Allen tool found within each foot and tighten down the Allen bolt securing our cross bar to the vehicle.
Roof Rack Information
Roof-Mounted Watersport Carriers
Roof-Mounted Ski and Snowboard Carriers
Thule AeroBlade Sizing Dimensions
