To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your Ram 3500 and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
Features:
Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless. Patent-pending QuickTurn stainless steel fasteners makes installation quick and easy - no drilling required.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, 3500 owners. Today, in your 2015 Ram 3500, we're going to be taking a look at and showing you how to install WeatherTech's front mudflaps.These mudflaps will help keep dirt and debris from flinging up off your tire onto the side of your truck. This will help increase the life of the paint that's on your vehicle, as well as the components, because once that paint's wore off, it can begin to rust. So if we stop it at the source, we'll greatly increase the life of our vehicle. It's also going to give your truck a more rugged look. You're putting it through its paces, so let people see that.
These mudflaps are custom designed for your 3500. You can see here how they contour to the body of the truck, as well as to our inner fender liner holding them in place.It's an easy, no-drill installation. You simply remove the two factory bolts, put your mud flap in place, and then reinstall them. This kit comes as a pair, so you'll have one for both your driver and your passenger side.We'll begin our installation on the front inner fender liner, just behind the rear tire. We're going to go ahead and start on the driver's side.
We want to make sure the area's thoroughly clean. Any of this dirt and debris that gets stuck between your fender liner and your mud flap can potentially damage the paint over time, because it can hold in moisture and vibrations and everything else. You want to get this as clean as possible.Once you've got it cleaned up the best you can get it, you'll want want to spray it again with some soapy water. Then take the protective film that comes with your kit, and we're going to stick this on the outside here, and this is just going to give us a protective layer between our mud flap and our painted surfaces, to help prevent any vibrations or moisture damage.Now you'll want to smooth out any air bubbles that's in it. You can use your finger or a sponge to get those out, and then you'll want to let it dry.
In the meantime, we can take out the two bolts that are located just on the other side of our fender well here, using an eight-millimeter socket.We can then take our mudflap. Make sure you've got the appropriate side. They are going to be labeled. We're going to line up the holes in our mud flap with the holes where the bolts we're that we just removed, and we're just going to re-install those bolts.I like to get them both started and then have them both mostly run all the way down, but not quite all the way, so we can kind of make sure that all the contours line up and then finish tightening it down. We'll then repeat this exact same process on the other side.And that completes our look at WeatherTech's front mud flaps on your 2015 Ram 3500..
Average Customer Rating: 4.8 out of 5 stars (1379 Customer Reviews)
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
Put them on to protect from rock chips. One year later still on the truck and no issues with coming loose, works great!
Great customer service
I looked at many different ones. I bought these as price was reasonable and etrailer did a video for installation which was easy. Just pop out a couple of existing screws and put these on!! Others installations were lots more than that. So I got them.
Well it was not too good to be true!!
Perfect fit, rears have two clips that are very secure. Front good fit too.
I hit the road for the summer next week so we shall see how they perform.
If they fail I will post again. So if I don’t post take it that they are perfect.
Pictures on this site are as good as it gets. They look good too
Wanted to add mud flaps on my 2016 2500 crew cab Dodge. Liked the idea of no drilling to minimize corrosion possibilities. Was not sure these would clear the factory step bars at the front but went ahead and ordered front and rears. All fit well and no issues with the factory step bars. Good product, decent price
I was very pleased with the mud flaps ordered from etrailer. They arrived on time and in perfect condition. Installation was simple and look like they were factory installed. Very pleased.
Easy to install, fit perfect.
Easy to install and will give good protection, but they do not fit flush with the fender. I really don’t mind this but some folks will probably complain. The factory molding that the mud flap is molded to fit around at the bottom of the flap does not allow the upper half of the flap to flush fit along the fender body.
Very easy to install and effective for keeping most mud and rocks from damaging the dually fenders.
Another great product from etrailer easy to install looks good and it works
Great service great price and installed in 10 to 15 minutes. They fit as advertised.
Very satisfied customer.
Gerald
4/18/2019
Great!!
Put them on today. Easy and look great.
Lydia
4/10/2020
Great. Well pleased.
Great product. Very easy installation.
Delivered and left out in rain. Everything was intact and mounted fine
Good stuff
Excellent in fit and function.
Perfect fit, faster than expected shipp ing!
Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.
Delivery was quick. The mudflaps were very easy to install it took me about 15 minutes. Extremely happy with the way they look and no more rocks and debris flying up from my tires. Definitely recommend.
Fantastic product. Very easy installation. High quality. Very fast delivery! Etrailer is the best as always!
These mud flaps are great! Good Instructions and install went quickly. They look really good and should perform well, protecting the rocker panels and the side steps from mud and stones. Very pricey but good quality. Front Pair.
holes did not line up with pre existing holes on car
for installation. Very hard
to install. will NOT buy weathertec again
Look great! Look OEM. Wish all the hardware was black. And in the front the two screws you pull out both sides, trash go get something a little longer and more girth. etrailer was great the arrived earlier then expected.
Do you have a question about this Mud Flap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim
5/14/2021
Excellent highly recommend