Vehicle Lights Specs:
Features:
With 360-degree coverage, these LED lights provide maximum light output for your vehicle's tail lights, brake lights or other auxiliary lights. The copper core maintains efficient heat control and powerful light output.
More Information >Vehicle Lights Specs:
Features:
Enhance visibility and the look of your vehicle with these replacement 194 (T10) wedge bulbs. The 4 high-intensity, forward-projecting LEDs on each bulb shine bright blue for a unique look and provide a 25,000-hour to 50,000-hour bulb life.
More Information >Vehicle Lights Specs:
Features:
Replace your factory bulbs with these 194 (T10) wedge bullets. The 2 high-intensity LEDs in each bulb illuminate a 180-degree surface area, shine bright white compared with dull factory bulbs, and provide a 25,000-hour to 50,000-hour bulb life.
More Information >Vehicle Lights Specs:
Features:
With 360-degree coverage, these LED lights provide maximum light output for your vehicle's tail lights, brake lights or other auxiliary lights. The copper core maintains efficient heat control and powerful light output.
More Information >Vehicle Lights Specs:
Features:
With 360-degree coverage, these LED lights provide maximum light output for your vehicle's turn signal lights. The copper core maintains efficient heat control and powerful light output.
More Information >Vehicle Lights Specs:
Features:
Upgrade your vehicle's factory turn signal or side marker lights with these halogen bulbs. These replacement halogen bulbs offer bright, orange-tinted light to improve visibility.
More Information >Vehicle Lights Specs:
Features:
Upgrade your vehicle's factory turn signal or side marker lights with these halogen bulbs. These replacement halogen bulbs offer bright, yellow-tinted light to improve visibility.
More Information >Videos
for Vehicle Lights
Help Articles
for Vehicle Lights
Expert Answers
for Vehicle Lights
You can get a new brake mounting flange for your axle. The old flange will need to be cut off. The part is #4-44-1. This is designed to fit a 3 inch trailer axle and should be welded in place by a professional. Since you would also have to get the…
view full answer...The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...We do have 205/75R14 size radial tires that have a load range of D and a speed rating of at least 81 mph. Out of our available selection I recommend going with the Kenda Karrier #AM10235. This tire has a max load rating of 2,200 lbs at 75 psi and a…
view full answer...Typically, when the outside edges of a tire are showing wear its because the tires are under-inflated. The solution is to inflate the tires to the maximum pressure listed on the sidewall. Now if the outside of tires have what looks like gouges are…
view full answer...In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…
view full answer...The Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers…
view full answer...The Correct Track Trailer Alignment and Lift Kit part #RR23QX offers a…
view full answer...Surge brakes use a hydraulic actuator to push fluid to the cylinder piston to activate the brake shoes on drum brakes or brake pads on disc brakes. This pressure should only be applied when weight is pushing against the hitch ball, so no pressure…
view full answer...The Blue Ox systems cannot be moved back that far but we do have the perfect system for you. Take a look at the Reese SC weight distribution systems linked to the right (minus the ones that say Light Duty). These systems have narrow brackets that…
view full answer...A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will…
view full answer...I added a photo which shows the location of the heating element of the Atwood Water Heater GC6AA-10E for you. It is item number 17 in the diagram. Atwood does recommend having a professional do the job if you are replacing it due to its location.
view full answer...