I have linked an installation video for the Curt Trailer Hitch Receiver #C25FV near the bottom of the page. This is performed on a 2024 Mazda CX-90. I do recommend installing the Curt T-Connector Vehicle Wiring Harness #C24ZV when you install the…
Hey John, the cleanest brake controller install for your 2025 Mazda CX-70 would be the Redarc Tow Pro Liberty part #RED52VR which only puts a small knob on the dash of your vehicle. Since your vehicle does not have the tow package to install it you…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
It is, yes. It can be hard to tell for sure, so I have added a photo for you showing the underside of a 2024 Mazda CX-90 with the Curt Trailer Hitch Receiver #C25FV. As you can see by that photo, the crosstube is concealed and hidden away, so only…
It looks quite good, in my opinion; I have gone ahead and added a photo for you of a 2024 Mazda CX-90 so you can see what yours will look like after the installation of the Curt Trailer Hitch Receiver #C25FV. The #C25FV has a concealed crosstube so…
The best hitch for a 2024 Mazda CX-90 is going to be the Curt item #C25FV. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs…
Hello David, thanks for reaching out. Sounds like you are on the right track here. Both the Curt #C25FV (13568) and #C74MJ (13627) will fit all models of the 2024 CX-90 and this includes the PHEV plug-in hybrid model. This is actually a rare case…
There is no cutting required to install the Curt Hitch item #C25FV on your 2024 Mazda CX-90. There is a small panel beneath your bumper cover that you will remove and not reinstall that will give you clearance for the 2" receiver. If you wanted…
Yes, if you are not able to install the Roadmaster Quiet Hitch part #RM-062 and part #RM-061 with the lock bar facing up, you may flip it over and install it so the lock bar is on the bottom of the receiver. I have attached a photo of the U-bolt…
I found some photos of the Heng's Roof Vent 122112 online. Based on this, it looks the correct replacement for you should be the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents part #BV0554-01 for white or part #BV0554-03 for…
I have some measurements for you which will allow you to verify if the Replacement Amber Lens #A44AB will fit your 2023 Grand Design Imagine XLS 17MKE. This lens is 4" long by 1-1/2" tall, see image below. Unfortunately, only Grand Design…
