Best 2018 Subaru Legacy Trailer Hitch Options- Video
Speaker 1: Today we're going to be taking a look at the best hitches available for the 2018 Subaru Legacy. Now the best hitch for you in my mind is going to be decided by how you plan on using it, so what we'll do is go through the different hitches and figure out what they're going to be good at, what they're just going to be average at.The hitch we have here at the top is going to be a Draw-Tite Class 3. That means it has a 2" by 2" receiver tube opening. That part number is 75673. The CURT, also a Class 3 with 2" by 2" receiver tube opening, is part number 13390. Then we have our Draw-Tite here, an 1-1/4" by 1-1/4" receiver tube opening. more
Best 2017 Subaru Legacy Trailer Hitch Options- Video
Speaker 1: Today we're going to be taking a look at the best hitches available for the 2017 Subaru Legacy. Now the best hitch for you in my mind is going to be decided by how you plan on using it, so what we'll do is go through the different hitches and figure out what they're going to be good at, what they're just going to be average at.The hitch we have here at the top is going to be a Draw-Tite Class 3. That means it has a 2" by 2" receiver tube opening. That part number is 75673. The CURT, also a Class 3 with 2" by 2" receiver tube opening, is part number 13390. Then we have our Draw-Tite here, an 1-1/4" by 1-1/4" receiver tube opening. more
Best 2017 Subaru Legacy Hitch Options- Video
Today we're going to be taking a look at the best hitches available for the 2017 Subaru Legacy. To start, we're going to have our Draw-Tite Class III. This part number is 75673. It's going to offer the 2"x2" receiver tube opening, just like our Curt Class III, which is part number 13390. Then we'll follow that up with the Draw-Tite Class II. Now, that's going to drop down to the 1-1/4"x1-1/4" opening. more
Best 2016 Subaru Legacy Trailer Hitch Options- Video
Speaker 1: Today we're going to be taking a look at the best hitches available for the 2016 Subaru Legacy. Now the best hitch for you in my mind is going to be decided by how you plan on using it, so what we'll do is go through the different hitches and figure out what they're going to be good at, what they're just going to be average at.The hitch we have here at the top is going to be a Draw-Tite Class 3. That means it has a 2" by 2" receiver tube opening. That part number is 75673. The CURT, also a Class 3 with 2" by 2" receiver tube opening, is part number 13390. Then we have our Draw-Tite here, an 1-1/4" by 1-1/4" receiver tube opening. more
2016 Subaru Legacy Draw-Tite Trailer Hitch Receiver: Complete Installation- Video
Today on our 2016 Subaru Legacy, we'll be installing the Draw-Tite Trailer Hitch Receiver Class II - 1-1/4". It's part number 36493. As you can see, this is what our 2016 Legacy looks like once we have the hitch installed. Pretty clean installation, very minimal amounts hanging down from the vehicle. We don't have much stuff showing where it attaches to the frame. We just have the horizontal crossbar coming here and the actual inch and a quarter receiver itself. This each has a 3500 pound max gross trailer weight rating. It has a 300 lb. more
Best 2015 Subaru Legacy Trailer Hitch Options- Video
Speaker 1: Today we're gonna be taking a look at the best hitches available for the 2015 Subaru Legacy. Now the best hitch for you, in my mind, is gonna be decided by how you plan on using it. So what we'll do is go through the different hitches and figure out what they're gonna be good at, what they're just gonna be average at. The hitch we have here at the top is gonna be a Draw-Tite class three, that means it has a two inch by two inch receiver tube opening.That part number is 75673. The Curt, also a class three, with two inch by two inch receiver tube opening. It's part number 13390. more
How to Set Up Your Draw-Tite Trailer Hitch Receiver on a 2015 Subaru Legacy- Video
Today on our 2015 Subaru Legacy we're going to review and install the Draw-Tite class two 1-1/4" receiver tube hitch, part number 36493. Now here's what our hitch is going to look like once it's installed. This is a completely steel built hitch with a fully welded construction. We've got a nice strong square tube and the entire hitch has a black powder-coated finish to resist rust and corrosion. Here at the receiver tube we've got easy access chain hold downs on each side of the hitch and a 1/2" pinhole going all the way through. The hitch itself is capable of up to 300 pound tongue weight and a 3,500 pound tow capacity. Next we'll give you a couple measurements to assist you with selecting accessories for your new hitch. more
Installing the Draw-Tite Trailer Hitch Receiver on your 2019 Subaru Outback Wagon- Video
Today on our 2019 Subaru Outback wagon, we're going to be taking a look at and showing you how to install the Draw-Tite Class 2 custom fit trailer hitch receiver, part number 36493. Here's what our hitch is going to look like once we have it installed. The crosstube is going to sit right below the bumper, but the main thing we're going to see is the receiver tube sticking out close to the end. It's going to give us an 1-1/4" by 1-1/4" receiver tube opening, which will be great for some smaller cargo carriers or bike racks.The way we're going to mount any of our accessories is through the hitch pin hole here on the side. It is going to accept a standard 1/2" pin and clip. These are not included in the kit but you can pick them up here at etrailer.com, along with some locking devices to keep your accessories secure. more
Setting up the Draw-Tite Trailer Hitch Receiver on your 2018 Subaru Outback Wagon- Video
Hey, everybody. Ryan here at etrailer. Today, on our 2018 Subaru Outback Wagon, we're gonna be showing you how to install the Draw-Tite 1-1/4" trailer hitch receiver. But before we do that, why don't we check it out and make sure this is gonna work for you. When it comes to Subarus in general, really having additional accessories on it makes sense. You know, they look right at home. more
Setting up the Draw-Tite Trailer Hitch Receiver on your 2017 Subaru Outback Wagon- Video
Today, on our 2017 Subaru Outback wagon, we're going to take a look at and also show you how to install the Draw-Tite Custom-Fit Class II Trailer Hitch Receiver, offering the inch-and-a-quarter by inch-and-a-quarter opening. It's part number is 36493. This is what our hitch is going to look like installed. We're going to have a square crosstube, pretty much visible across the rear of the vehicle until it meets the side plates there. In the middle, we've got our inch-and-a-quarter by inch-and-a-quarter receiver tube opening. This is a Class II hitch, so this is going to work out really good. You can carry four bike racks, cargo carriers, ball mounts for small trailers. more
Installation Guide for the Draw-Tite Trailer Hitch Receiver on a 2016 Subaru Outback Wagon- Video
Today on our 2016 Subaru Outback Wagon, we're going to be taking a look at and installing the Draw Tite Trailer Hitch Receiver Class 2, 1 1/4". Part number 36493. Now, here's what it looks like once it's installed. You can see it's going to fit up nicely against the bottom of our vehicle. It's got a nice, black powder-coated finish. Nice, round ring style safety chain loops. It's going to give you a nice spot to put your large hooks on. more
Set up: Draw-Tite Trailer Hitch Receiver on a 2015 Subaru Outback Wagon- Video
Today on our 2015 Subaru Outback wagon we're going to take a look at, then show you how to install the Draw-Tite class two custom fit trailer hitch receiver. This offers an 1-1/4" opening. Its part number is 36493. Now once we get our hitch installed, this is what we're going to see. It's going to be a nice, narrow, compact looking hitch. The crosstube is not big and obnoxious. more
DIY Install: Draw-Tite Trailer Hitch Receiver on your 2014 Subaru Outback Wagon- Video
Today on our 2014 Subaru Outback wagon, we'll be installing our Draw-Tite hitch, part number 36493. Here's what our hitch will look like once it's installed. Next we'll go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch, such as a ball mount, bike rack, or cargo carrier. From the center of the hitch pin hole to the outermost edge of the bumper it's 6 inches. From he top of the receiver tube opening to the ground it's 16 1/2 inches. Now we'll go ahead with the installation. Now, to begin our install, we'll first need t lower the exhaust. To safety lower the exhaust we'll put a surety strap underneath it first, to help control the weight of the exhaust once you remove the exhaust hangers. more
2013 Subaru Outback Wagon Draw-Tite Trailer Hitch Receiver: Complete Installation- Video
Today on our 2013 Subaru Outback Wagon well be installing the Draw-Tite Hitch, part number 36493. Heres what our hitch will look like once its installed. Next Ill go ahead and give you a couple measurements this will assist you with selecting accessories such as a ball mount, bike rack or cargo carrier. From the center of the hitch pin hole to the outermost edge of the bumper is 4-3/4 inches. From the top of the receiver tube opening to the ground is 10-1/4 inches. Well now go ahead with the installation. Now to begin our install we need to lower the exhaust so we can gain access to the frame on both sides. For this application youll notice this only has a single exhaust. more
How to Install the Draw-Tite Trailer Hitch Receiver on a 2012 Subaru Outback Wagon- Video
Today on this 2012 Subaru Outback Wagon we're going to install part number 36493, from Draw-Tite. Now we'll go ahead and give you some measurements to help you out in selecting some accessories such as a bicycle rack or a cargo carrier. From top of receiver opening down to the ground will be 14 inches. From the center of the hitch pin hole to the edge of the bumper will be four and a half inches. Now I'll go ahead and show you how the hitch is installed. Our first step is to go ahead and remove the muffler. more
Installing the Draw-Tite Trailer Hitch Receiver on your 2011 Subaru Outback Wagon- Video
Today on our 2011 Subaru Outback wagon well be installing the Draw-Tite hitch, part number 36493. This is what our hitch will look like once installed. Next well go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch, such as a draw bar, bike rack or a cargo carrier. From the center of the hitch pin hole to the outer most edge of the bumper is five inches. From the top of the receiver tube to the ground is 13 inches. First, before we can install the hitch well need to lower the exhaust. more
How to Install: Draw-Tite Trailer Hitch Receiver on your 2010 Subaru Outback Wagon- Video
Today, in this 2010 Subaru Outback Wagon, we're going to be installing Hidden Hitch Part Number 90208. This installation will also apply for draw type hitch, Part Number 36-493. The first thing we need to do in preparation to installing our trailer hitch is go ahead and lower the exhaust down. On single exhaust models this will be on the driver side. On dual exhaust models, obviously, we'll need to remove it off both sides. There are 3 hangers that we're going to need to remove the heats exhaust, also. more
