Miro-Flex LED Clearance or Side Marker Light w/ Reflector Feature Review Video

From the information that I was able to find on the L44549 bearing, it shows it being a 1-1/16 inch bearing which is the same as Trailer Hub Bearing, #L44649. Just to be sure, I recommend measuring the L44549 bearing with a digital caliper to confirm…

Thanks for the info and pictures of your hub! Based on that the correct replacement is the part #8-257-5UC3-EZ which matches the bolt pattern, drum size, and bearing info you listed as well.

I have another wheel size that will work, but there are not any hub and drum assemblies for your 3500lb axle that will work with 10" wheels. For 3500lb axles you need 10" braking assemblies #AKEBRK-35-SA and 10" hub and drum assemblies…

L44549 bearings have a 1-1/16 inch inner diameter, which is the same as the 1.063 inch inner diameter of bearings item #L44649. For this size you will want the Trailer Idler Hub Assembly item #AKIHUB-440-2-G-2K. This hub is designed for 2,000 lbs…

Setting up a trailer with electric drum brakes is going to be the easier and most cost effective way of adding brakes to your Scamp trailer. Since the trailer already has the mounting flanges that will limit the amount of parts and work that will…

Assuming the trailer is as single axle and only has two tires the smallest we carry is a 205/75-14 size tire. The Kenda #AM10235 measures 26.3 inches in diameter and has a weight capacity of 2,200 pounds at 75 psi. You also want to make sure the…

The 205/65-10 and the 20.5 x 8-10 would be very close in size. Assuming that 20.5 is the diameter of the tire and 8 is the width. The Kenda 205/65-10 Bias Trailer Tire with 10 inch White Wheel, #AM3H390, for example, is 8.3 inches wide with a…

We do not have a kit for what you are seeking but I do have the parts to help. You will start with the Timbren Axle-Less Trailer Suspension System - 4" Drop Spindle w/ Brake Flange - 5,200 lbs #ASR5200S04. This will allow you to use the Trailer…

The overall diameter of a trailer tire in the size you mentioned of 20.5x8-10 like part #AM1HP54 has a diameter of 20.6 inches.

A tow-behind hydraulic lift is going to need to be stable so I recommend using a tandem axle set up just like you mentioned. That would equate to using 2 sets of Timbren Axle-Less systems rated for 5,200 pounds for a total capacity of 10,400 pounds.…

For your 2011 Aluma EA614TA that has 3,500 lb axles for a set of left and right hand brake assemblies the part #AKEBRK-35-SA would work great for a self adjusting set. The other thing you have pictured is a breakaway kit which for a replacement of…

You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…