bing tracking image

Optronics Trailer Lights - Utility Lights - ILL28CMPG Review

content loading

Customers compare ILL28CMPG to these similar products




Products Featured in this Video



Review of Optronics Trailer Lights ILL28CMPG


Speaker 1: Today we're taking a look at the Optronics Opti Bright LED Dome light. This is designed for use in extreme temperatures so it's ideal for refrigerated trucks and trailers. It will withstand temperatures from negative 40 degrees fahrenheit to positive 140 degrees fahrenheit. Directly in the center it features the motion sensor so the light will come on automatically when motion is detected. Operating voltage is 7 to 30 volts DC. Voltage cutoff at 7 volts prevents battery drain.

So again, voltage cutoff is at 7 volts direct current and that prevents battery drain.You can use this with 12 volt and 24 volt DC systems. The light output remains consistent at all operating voltages and cuts off when the voltage is outside of range. Now this is an LED system. LED's make great replacements for incandescent lights. They last longer, they burn brighter and they are much more efficient.

You don't have to worry about replacing bulbs and you don't have to worry about brittle filaments with LED systems.It's a two wire design so you have you have your white wire, which is ground and black wire which is your power lead. And on the ends of the wiring we have the .180 male bullet connectors. If you don't want those on there, you can cut them off, strip back the wiring for hard wire applications. It features polycarbonate lens and housing, it's very strong and durable. We're looking at a clear lens with a white base.

When it comes to the installation, that's a recess mount installation. Mounting hardware not included but you will need to cutout for this portion right here in order for the light to sit flush.Now when it comes to the overall dimension. I took a measurement from edge to edge, got a measurement of 18 1/4" long. Side to side, we're looking at about 5 3/4" wide. And the overall thickness, or the overall depth, so from very front to very back is 1 1/8" thick.

Now from the installation surface to the front of the unit is only about 3/8" thick. So it's a nice low profile design once installed. The mount holds on the unit. You can see you have numerous mount holes around the perimeter of the light. These holes right here are separated on center by 2 3/16", these are separated on center by 4 3/4" and then this set to this set on center is 17 1/8". Your cutout needs to measure around 16 1/2" long by 4" wide.We're going to go and hook it up to power, that way you can see what it looks like with some power running to it. We'll also be able to turn off our overhead lights so you can see it in a lower light setting. So you can see here it sends out a very bright consistent signal. It's a nice bright light that has multiple LED's or multiple daioids so the multi daioids design helps optimize the overall light output. The raw lumen, when it comes to the brightness the raw lumen is 1400. Effective lumen output is 990. Power draw at 12.8 volts, 1.61 amps. Power draw at 24 volts 0.80 amps. And Optronics puts a life time warranty on the LED'sThat's gonna do it for today's look at the Optronics Opti Bright LED Dome Light.


Questions and Comments about this Video

Info for this part was:

Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.