Tube Step Specs:
Features:
Chiseled-style, custom-fit step bars fit close to your vehicle for a seamless look. Oversize, textured step areas drop down to provide good footing for an easy step up. Sturdy, 1-piece steel construction has rust-resistant black powder coat finish.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Made of rust-resistant stainless steel, these straight-style, custom-fit step bars have rugged square edges, and their mounting brackets are hidden for a seamless look. 5" step pads cover the bars to provide good traction.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These straight-style step bars give your vehicle a rugged look. 5-1/2" Wide step pads have stamped-grid tread design for excellent traction. All-aluminum construction with chrome powder coat finish. Custom installation kit included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These straight-style step bars give your vehicle a rugged look. 5-1/2" Wide step pads have stamped-grid tread design for excellent traction. All-aluminum construction with black powder coat finish. Custom installation kit included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Each of these black powder coated stainless steel nerf bars features (2) 2" drop steps and an angular design for a rugged look. Removable stainless steel step plates are rustproof. Easy, no-drill installation. Mounting hardware included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Made of rustproof black powder coated aluminum, these straight-style, custom-fit step bars have rugged square edges, and their mounting brackets are hidden for a seamless look. 5" Wide step pads cover the bars to provide good traction.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Made of rust-resistant powder coated steel, these straight-style, custom-fit step bars have rugged square edges. Extra-wide step pads cover the oversize bars to provide good traction.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These rugged, steel running boards provide a 5-1/2" wide step for entering and exiting your vehicle. Integrated step pads blend steel with non-skid, poly tread. Black powder coat finish. Custom mounting kit included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These custom-fit award-winning nerf bars feature a notched bar design. The step pads are wider than on competitors' nerf bars and their die-stamped design provides strong traction. Steel construction with a textured black finish.
Installation Notes:
No drilling required for installation
More Information >Videos
for Nerf Bars - Running Boards
Help Articles
for Nerf Bars - Running Boards
Expert Answers
for Nerf Bars - Running Boards
For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…
view full answer...It sounds like the 2022 Chevy Silverado 3500 you are getting has the short bed. In that case, yes, you definitely want the sliding 5th wheel hitch for clearance. The good news is you will not need to purchase the entire…
view full answer...Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle).…
view full answer...Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles -…
view full answer...Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR.…
view full answer...Filter Products (18)
Contact and Help
What our customers are saying:
These arrived yesterday and are EXACTLY what I was looking for. Thanks for the excellent service!
Bill
Boxborough, MA