Tube Step Specs:
Features:
Custom-fit, round nerf bars have wide, non-slip step pads that help you easily enter and exit your vehicle. Constructed of carbon steel with a black powder coat finish to resist chipping, peeling, and fading. Custom installation with mounting kit.
Installation Notes:
No drilling required for installation
Product does not fit models with factory mud flaps
Product does not fit models with side body cladding
More Information >Videos
for Nerf Bars - Running Boards
Help Articles
for Nerf Bars - Running Boards
Expert Answers
for Nerf Bars - Running Boards
Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…
view full answer...For the Edge CS2 Evolution Diesel Tuner you will need to enter the programming menu. You will turn on your vehicle without starting it. Then use the Menu button to open the main menu and scroll down with the arrow to the Programming on the screen.…
view full answer...Depending on what cab style your 2006 Super Duty Cab and Chassis has will determine which DeeZee running boards you'd need. If you have a SuperCab you'd need the…
view full answer...Hello Brad, we have exactly what you are looking for! You can use the Curt Adapter Rails #C88KR. This will attach directly to the OEM puck system (the 5 pockets) in the bed of your 2024 Chevy, and it will give you the industry standard rails you…
view full answer...The RF controller of your Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR doesn't have an internal battery and requires a 12v outlet for power. If…
view full answer...It won't fit because the brackets are completely different. The 2008 GMC Sierra's are a different generation than a 2005. GM made some significant changes to their trucks…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...With the ends of your Aries Oval Nerf Bars #AAS225041 being sealed and only having the one hole large enough to reach into I recommend using fly tape to insert into the opening you do have. You can then drive around with your 2016 Ram 1500 so the…
view full answer...The Westin E-Series Round Nerf Bars #23-0500 for a 1988-2000 Chevy/GMC C/K install on the frame/body mount. You will actually remove the body mount bolts, then per the instructions, "attach the Bracket to…
view full answer...You will be able to use the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness #41157 to install a 7-way connector in the bed of your 2024 Toyota Tundra. I can see it uses the 7-Way/4-Way Connector #HM40975 which is used on most trucks…
view full answer...The only replacement part we have available for the original Blue Ox Patriot (BRK2012) is the Replacement Brake Claw #BRK2512. Unfortunately, this system was discontinued in 2017 and there are no other replacement parts available any longer. You…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you…
view full answer...