2013 Toyota Corolla Trunk Bike Rack

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

We only carry one trunk mounted bike rack that will fit your 2018 Honda Civic Hatchback. Take a look at the Saris Bones EX 2-bike Rack #SAR83FR. This 2-bike trunk rack has an arched dog leg that fits over the spoiler on most sedans, hatchbacks, and…

The fat tire straps for the Kuat NV 2.0 #BA22B can only accommodate tires up to 5" so the 6-1/2" tires won't work with this bike rack. Since none of the bike racks are going to be able to fit those tires, I…

While both fit your 2020 Toyota Prius, the biggest differences between the Saris Bones 2 Bike Rack #SA805BL and Saris Bones EX 2 Bike Rack #SAR83FR is the latter has an added top anchor leg for more stable mounting, as well as strap management so…

The correct Thule roof rack that fits your 2024 Jeep Grand Cherokee with flush rails is the Wingbar Evo roof rack part numbers #TH711220, #TH710601, #TH68FE. The Wingbar crossbars are the quietest and most aerodynamic so they'll work…

I spoke with Thule and the told me the distance you are looking for is 9.84 inches or 25 centimeters.

Hey Antone, you are right the battery placement on the 2022 Honda CR-V is the reason the hitches do not fit so a trunk mounted bike rack solution would be your best bet. The one I recommend for your CR-V is the Saris Bones 2 part #SA805BL that you…

I have a great demonstration video that shows exactly what to do! Our expert Jon walks you through how to turn the bottom hooks of the FullBack 2 #Y02634 into the "anchor mode" at the attached video at timestamp 3:25. You…

For your 2024 Toyota Sienna XSE I recommend the etrailer Trailer Hitch Receiver #e56RR. This features a 2" receiver with a bolt-on installation. It has a 350 lb max tongue weight which should be more than enough for your bike rack and…

Replacing pull-out steps won't require a bunch of modifications if we can find a matching fit to your current steps. To find the correct fit we'll need to know the entry height (measurement from the ground up to the mounting…

Rob, the Thule square bars and the Inno square bars have the same measurements so the Inno feet would be compatible. So if you have factory raised rails then you're going to need the Inno Feet for Square Crossbars #INFR, but if you have…

Since your 2024 Telluride X-Line is not an LS or S model the correct wiring harness is the Curt #C29ZV. This will plug into the connection points in the rear cargo area and provide you with a 4-way to power your trailer's signal lights.…