Towing Mirrors Specs:
Features:
Extra-large, universal towing mirrors clip over your existing side mirrors to give you an extended rear view. A ratcheting strap system creates a snug fit to reduce vibration. Easy, tool-free installation. Includes 2 mirrors.
More Information >Towing Mirrors Specs:
Features:
Custom, power towing mirrors replace the factory mirrors on your vehicle. The mirrors telescope out to extend your lines of sight. A turn signal and a puddle lamp is built into the side of each mirror, and the heated glass clears frost and ice.
Installation Notes:
Additional features may be lost, as these mirror replacements may include some functions, but they do not include all of the functions
Tech Tip:
Mirror includes turn signal and puddle lamp.
More Information >Towing Mirrors Specs:
Features:
Custom, manual towing mirrors replace the factory mirrors on your vehicle. The mirrors telescope out to extend your lines of sight. And the built-in spotter mirrors reduce blind spots. No-drill installation.
Installation Notes:
Additional features, such as LED turn signals, automatic dimming, and puddle lights will be lost, as these mirror replacements do not include such functions
More Information >Towing Mirrors Specs:
Features:
Universal dual lens towing mirror clips over one of your existing side mirrors to give you an extended rear view. A ratcheting strap system creates a snug fit to reduce vibration. Driver's and passenger's side. Tool-free installation.
More Information >Towing Mirrors Specs:
Features:
Snap these custom-fit towing mirrors over your vehicle's existing mirrors for an expanded field of vision. Built-in mounting clips grab the inside edges of your factory mirrors for a simple, tool-free installation and a clean look.
Installation Notes:
Does not fit STX models
Tech Tip:
Product does not fit manual mirrors.
More Information >Videos
for Towing Mirrors
Help Articles
for Towing Mirrors
Expert Answers
for Towing Mirrors
The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…
view full answer...I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...You will need the Ceiling Garnish for Fan-Tastic Vents Roof Vent #FVK1060-81 as it is specific to your Dometic Fantastic Fan 1450. The Ceiling Garnish for Ventline Roof Vent #VA0445-37 is going to have rounded corners as opposed to the square on…
view full answer...I have added a photo detailing the wiring connections for the Pollack Heavy-Duty, 7-Pole, Round Pin conncetor, #PK11700, see link. This is a SAE J560 compliant connector. The wiring diagram for the vehicle side connector, #PK11720, is pictured…
view full answer...On a single axle trailer you will want to have a hanger spacing of around 22-3/4 inches when using the 23-1/8 inch long Double-Eye Spring #e59SR. This will allow that rear shackle to correctly lean away from the axle for proper suspension travel.
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...Yes! What you're going to need for your 2022 Chevrolet 2500HD, is the 7-Way Vehicle Power Adapter…
view full answer...Hi Rene; I'm sure…
view full answer...Filter Products (10)