FiltersVehicle Suspension Specs:
Features:
4,070-lb Capacity. Upgrade your vehicle's front suspension with SuperCoils. They replace your factory coil springs to improve your suspension and reduce sag. Great for snowplows and trucks with beefy bumpers. Increases ride height by 1-3/4".
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles with Diesel Engine only
Product will add approximately 1.75" of lift to suspension
More Information >Vehicle Suspension Specs:
Features:
4,070-lb Capacity. Upgrade your vehicle's front suspension with SuperCoils. They replace your factory coil springs to improve your suspension and reduce sag. Great for snowplows and trucks with beefy bumpers. Increases ride height by 1-3/4".
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles with Diesel Engine only
Product will add approximately 1.75" of lift to suspension
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a Boxed Frame and a GVWR greater than 7,300 lbs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a Boxed Frame and a GVWR greater than 7,300 lbs
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.
Installation Notes:
No drilling through vehicle frame required for installation.
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.
Installation Notes:
No drilling through vehicle frame required for installation.
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
4,600-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for those who often tow or haul heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for use on Cutaway models only
Check vertical clearance above spring pack before purchase. Product only fits vehicles with floor pan that is higher than top of frame
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a Boxed Frame and a GVWR greater than 7,300 lbs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a Boxed Frame and a GVWR greater than 7,300 lbs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for use on Cutaway models only
Check vertical clearance above spring pack before purchase. Product only fits vehicles with floor pan that is higher than top of frame
More Information >Vehicle Suspension Specs:
Features:
5,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Becomes more rigid as more weight is added for great performance when you're hauling a heavy load.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is designed for Motor Home models
More Information >Vehicle Suspension Specs:
Features:
5,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Becomes more rigid as more weight is added for great performance when you're hauling a heavy load.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is designed for Motor Home models
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not hauling or towing.
Installation Notes:
No drilling through vehicle frame required for installation.
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not hauling or towing.
Installation Notes:
No drilling through vehicle frame required for installation.
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is designed for use on Cutaway models only
Product is designed for vehicles with approximately 2-1/2 inch wide springs
More Information >
