Vehicle Suspension Specs:
Features:
3,000-lb Capacity. These air springs create a more stable ride and better handling when you are hauling a heavy load. The springs can be adjusted based on the size of the load to level your vehicle and reduce the strain on your rear axle.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Product can be used for vehicles with or without factory top overload springs
Designed for vehicles with a GVWR less than 8,500 lbs
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 6".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are pushing a plow. They reduce strain on your front axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a GVWR greater than 8,500 lbs
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Tech Tip:
For vehicles used in off-road rough conditions, SuperSprings recommends adding their Poly Pad mounting kit P1KT; sold separately.
More Information >Vehicle Suspension Specs:
Features:
3,400-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory top overload springs
Designed for use on Heavy Duty trucks
Tech Tip:
For vehicles used in off-road rough conditions, SuperSprings recommends adding their Poly Pad mounting kit P1KT; sold separately.
More Information >Vehicle Suspension Specs:
Features:
3,600-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles with Snow Plow Prep Pkg
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 3 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles without Snow Plow Prep Pkg
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is intended for vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. These maintenance-free microcellular urethane springs upgrade your vehicle's rear suspension. Each 2-piece spring connects at top and bottom and provides unlimited suspension travel and movement for a smooth, comfortable ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with a 5th wheel hitch
Designed for use on vehicles carrying variable loads
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 3 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Silent Ride urethane bushings prevent rattling.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
More Information >
Filters
