Base pads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizer jacks. Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 2 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Black powder coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip so you can quickly and easily remove and reinstall it as needed. 12,000-lb Maximum load.Features: Stake pocket anchor provides a tie-down point in your flatbed truck or trailer Movable anchor slides into a standard 2x4 stake pocket Can be easily removed and reinstalled as needed Secures in place with included pin and clip D-ring is hinged so straps can be attached from different angles Black powder coated steel is durable and rust resistant Made in the USA Specs: Dimensions: 8-1/4" tall x 3-1/2" wide Safe working load limit (WLL): 4,000 lbs Maximum load (break strength): 12,000 lbs Inner diameter of D-ring: 3" Shackle diameter: 5/8" Quantity: 1 stake pocket tie-down 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Black powder coated anchors slide into a 2x4 stake pockets on your flatbed truck or trailer. Movable anchors secure with the included pins and clips, so you can quickly and easily remove and reinstall them as needed. 12,000 lbs Max load.Features: Stake pocket anchors provide tie-down points in your flatbed truck or trailer Movable anchors slide into a standard 2x4 stake pockets Can be easily removed and reinstalled as needed Secure in place with included pins and clips Hinged D-rings let you attach straps from different angles Black powder coated steel is durable and rust resistant Specs: Safe working load limit (WLL): 4,000 lbs Maximum load (break strength): 12,000 lbs Inner diameter of D-ring: 2-3/8" Anchor dimensions: 5" Tall from the bottom of the mounting plate to the bottom of the anchor 2-3/4" Wide 3-1/4" Tall from the bottom of the mounting plate to the top of the pin hole Quantity: 2 stake pocket tie-downs Anchor weight (each): 3 lbs 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Black powder coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip so you can quickly and easily remove and reinstall it as needed. 12,000-lb Maximum load.Features: Stake pocket anchor provides a tie-down point in your flatbed truck or trailer Movable anchor slides into a standard 2x4 stake pocket Can be easily removed and reinstalled as needed Secures in place with included pin and clip D-ring is hinged so straps can be attached from different angles Black powder coated steel is durable and rust resistant Made in the USA Specs: Dimensions: 7-1/4" usable height x 3-1/2" outside width Safe working load limit (WLL): 4,000 lbs Maximum load (break strength): 12,000 lbs Inner diameter of D-ring: 2-5/16" Shackle diameter: 1/2" Quantity: 1 stake pocket tie-down 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Black powder coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load.Features: Stake pocket anchor provides a tie-down point in your flatbed truck or trailer Movable anchor slides into a standard 2x4 stake pocket Can be easily removed and reinstalled as needed Secures in place with included pin and clip D-ring is hinged, which allows straps to be attached from different angles Black powder coated steel is durable and rust resistant Made in the USA Specs: Safe working load limit (WLL): 1,600 lbs Maximum load (break strength): 5,000 lbs Inner diameter of D-ring: 1-3/4" high x 2" wide Anchor dimensions: 5-1/4" Tall from the bottom of the mounting plate to the bottom of the anchor 3-1/2" Wide 4-1/4" From the bottom of the mounting plate to the top of the pin hole Top plate dimensions: 3-1/2" long x 2" wide Pin diameter: 1/2" Quantity: 1 stake pocket tie-down 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Black powder coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load.Features: Stake pocket anchor provides a tie-down point in your flatbed truck or trailer Movable anchor slides into a standard 2x4 stake pocket Can be easily removed and reinstalled as needed Secures in place with included pin and clip D-ring is hinged, which allows straps to be attached from different angles Black powder coated steel is durable and rust resistant Made in the USA Specs: Safe working load limit (WLL): 1,600 lbs Maximum load (break strength): 5,000 lbs Inner diameter of D-ring: 2" Anchor dimensions: 5-1/4" Tall from the bottom of the mounting plate to the bottom of the anchor 3-1/2" Wide 4-1/4" From the bottom of the mounting plate to the top of the pin hole Top plate dimensions: 3-1/2" long x 2" wide Pin diameter: 1/2" Quantity: 1 stake pocket tie-down 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
When you need sturdy sidewalls for your flatbed truck or utility trailer, this weld-on stake pocket makes it simple. Just drop in a 2x4 board and know your cargo is staying put. It's raw metal, so give it a painted finish to prevent rusting.Ready to Paint: Because it's raw, unfinished steel you can customize the finish it to match your trailer and protect the pocket from rusting. Made in the USA Specs Application: Trailers and flatbed trucks Weld-on installation Accepts standard 2x4 (1-1/2" x 3-1/2") Dimensions: Overall: 4-1/4" long x 3" tall x 1-7/8" deep Pocket opening: 3-5/8" wide x 1-5/8" deep Thickness: 4-gauge Made in the USA
Corrosion-resistant zinc-coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load.Features: Stake pocket anchor provides a tie-down point in your flatbed truck or trailer Movable anchor slides into a standard 2x4 stake pocket Can be easily removed and reinstalled as needed Secures in place with included pin and clip D-ring is hinged, which allows straps to be attached from different angles Zinc-coated steel offers excellent corrosion resistance Made in the USA Specs: Safe working load limit (WLL): 1,600 lbs Maximum load (break strength): 5,000 lbs Inner diameter of D-ring: 2" Anchor dimensions: 5-1/4" Tall from the bottom of the mounting plate to the bottom of the anchor 3-1/2" Wide 4-1/4" From the bottom of the mounting plate to the top of the pin hole Top plate dimensions: 3-1/2" long x 2" wide Pin diameter: 1/2" Quantity: 1 stake pocket tie-down 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Heavy-duty stake pocket bracket bolts onto trailer or flatbed truck so you can build a sidewall to contain cargo. Tapered so stake fits tightly in pocket. ... Features: Heavy-duty bracket creates 1 stake pocket on your flatbed truck or trailer Allows you to build a sidewall to help contain cargo Tapered design ensures stake fits snugly into pocket Works with a 2x4 that is tapered at the bottom Paintable to match your vehicle or trailer Pre-drilled for easy, bolt-on installation 4 Square holes provide mounting points for 5/16" carriage bolts (not included) 5/16" Hole in center of pocket lets you secure the stake in place Stamped with "TOP" to ensure proper orientation Constructed of 1/8" thick, 10.5-gauge steel Specs: Overall dimensions: 2-1/2" tall x 6-9/16" wide x 1-1/2" deep Stake opening: 3" wide Stake pocket mounting hole dimensions: 3/8" x 3/8" Mounting hole spacing (center to center): Top to bottom: 1-1/2" Side to side: 5-5/8"
This corrosion-resistant stake pocket bracket bolts onto your trailer or flatbed truck. The pocket accepts a 2x4 so that you can build a sidewall to keep your cargo in your trailer or truck bed.Features: Heavy-duty bracket attaches to your flatbed truck or trailer to create 1 stake pocket Supports a 2x4 stake Can be used to support a home-built gate or fence to keep cargo in place Bolt-on installation Requires 3/8" mounting bolts - not included Center bolt hole can be used to secure board in position 11-Gauge, galvanized steel construction is sturdy and resists corrosion Made in the USA Specs: Application: trailers and flatbed trucks Overall dimensions: 6" long x 2-1/2" tall x 1-7/8" deep Stake pocket opening: 3-5/8" wide x 1-7/8" deep Diameter of mounting holes (each): 3/8" NOTE: Will accommodate a standard 2x4, which measures 1-1/2" x 3-1/2" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
This beefy tie-down slides into a 4-3/4" stake pocket on your trailer. The anchor secures in place with the included pin and clip so you can easily remove and replace it as needed. Powder coated steel resists rust. 12,000 lbs Max load.Features: Stake pocket anchor provides a tie-down point in your trailer Movable tie-down slides into a 4-3/4" stake pocket Can be easily removed and reinstalled where you need it Secures in place with included pin and clip D-ring is hinged so that it's easy to secure tie-down straps from different angles Solid steel construction Heavy-duty gloss black powder coat finish resists chipping and scratching Made in the USA Specs: Safe working load limit (WLL): 4,000 lbs Maximum load (break strength): 12,000 lbs Quantity: 1 stake pocket tie-down Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Weld-on stake pocket installs on your utility trailer or flatbed truck. It is designed to hold a 2x4 stake so that you can build a sidewall to help keep cargo contained.Features: Heavy-duty bracket attaches to your flatbed truck or utility trailer to create 1 stake pocket Supports a 2x4 stake Can also be used as a tie-down point for cargo straps and binder chains Weld-on installation Sturdy steel construction Assembled in the USA Specs: Application: utility trailers and flatbed trucks Exterior dimensions: 4-1/8" long x 1-7/8" wide x 3" tall Interior dimensions: 3-3/4" long x 1-5/8" wide x 3" tall Wall thickness: 3/16" 1-Year limited warranty Note: This stake pocket is designed to accommodate a standard 2x4, which measures 3-1/2" wide x 1-1/2" thick.
Corrosion-resistant zinc-coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load.Features: Stake pocket anchor provides a tie-down point in your flatbed truck or trailer Movable anchor slides into a standard 2x4 stake pocket Can be easily removed and reinstalled as needed Secures in place with included pin and clip D-ring is hinged, which allows straps to be attached from different angles Zinc-coated steel offers excellent corrosion resistance Made in the USA Specs: Safe working load limit (WLL): 1,600 lbs Maximum load (break strength): 5,000 lbs Inner diameter of D-ring: 1-3/8" Anchor dimensions: 5-1/4" Tall from the bottom of the mounting plate to the bottom of the anchor 3-1/2" Wide 4-1/4" From the bottom of the mounting plate to the top of the pin hole Top plate dimensions: 3-1/2" long x 2" wide Pin diameter: 1/2" Quantity: 1 stake pocket tie-down 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This beefy tie-down slides into a 2x4 stake pocket on your flatbed truck or trailer. The anchor secures in place with the included pin and clip so you can easily remove and replace it as needed. ... Features: Stake pocket anchor provides a tie-down point in your flatbed truck or trailer Movable tie-down slides into a standard 2x4 stake pocket Can be easily removed and reinstalled where you need it Secures in place with included pin and clip 1/2" Diameter D-ring is hinged so that it's easy to secure tie-down straps from different angles Solid steel construction Heavy-duty gloss black powder coat finish resists chipping and scratching Made in the USA Specs: Safe working load limit (WLL): 4,000 lbs Maximum load (break strength): 12,000 lbs Inner diameter of D-ring: 2-1/4" Anchor dimensions: 5-3/8" Tall from the top of the mounting plate to the bottom of the anchor 3-3/8" Wide 3-1/4" From the bottom of the mounting plate to the top of the pin hole Top plate dimensions: 4-1/2" long x 1-3/4" wide Pin dimensions: 5/8" diameter x 5-1/4" long Quantity: 1 stake pocket tie-down Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Stake pocket bracket bolts onto trailer or flatbed truck so you can build a sidewall to contain cargo. Tapered so stake fits tightly in pocket. ... Features: Heavy-duty bracket creates 1 stake pocket on your flatbed truck or trailer Allows you to build a sidewall to help contain cargo Tapered design ensures stake fits snugly into pocket Works with a 2x4 that is tapered at the bottom Paintable to match your vehicle or trailer Predrilled for easy, bolt-on installation 4 square holes provide mounting points for carriage bolts (not included) Stamped with "TOP" to ensure proper orientation Constructed of 5/64" thick, 14-gauge steel for strength and durability Zinc-plated finish is rust and corrosion-resistant Made in the USA Specs: Overall dimensions: 2-1/2" tall x 6-1/2" long x 1-1/2" deep x 5/64" thick Stake opening (at top): 1-1/2" deep x 3" wide Stake opening (at bottom): 1-1/2" deep x 2-7/8" wide Stake pocket mounting hole dimensions: 7/16" tall x 7/16" wide Mounting hole spacing (center to center): Top to bottom: 1-1/2" Side to side: 5-1/2"
Base pads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizer jacks. Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 4 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Base pads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizer jacks. Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 5 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
... Maintenance-free cap has 2 installation options. Fits 1-1/4", 1-1/2", and 2" diameter pipe stacks.Furthermore, the 360 Siphon provides you with a dependable, long-lasting solution, whereas perfumed chemicals can take up to 48 hours to kick in and merely mask the odors for a short period of time. 2 Installation Options This maintenance-free vent cap is compatible with 1-1/4", 1-1/2", and 2" pipe stacks. If you have a 1-1/2" pipe stack, the included funnel is required for installation. If you have a 1-1/4" or 2" pipe stack, a PVC adapter sleeve (not included) may be required for installation.
... Maintenance-free cap has 2 installation options. Fits 1-1/4", 1-1/2", and 2" diameter pipe stacks.Furthermore, the 360 Siphon provides you with a dependable, long-lasting solution, whereas perfumed chemicals can take up to 48 hours to kick in and merely mask the odors for a short period of time. 2 Installation Options This maintenance-free vent cap is compatible with 1-1/4", 1-1/2", and 2" pipe stacks. If you have a 1-1/2" pipe stack, the included funnel is required for installation. If you have a 1-1/4" or 2" pipe stack, a PVC adapter sleeve (not included) may be required for installation.
Interlocking blocks stack to different heights and can be positioned beneath jacks, stabilizers or RV wheels to add just enough lift to level your rig.Features: Stackable blocks provide extra lift to level your trailer or motor home Position beneath jacks, stabilizers or trailer wheels Interlocking design guarantees no shifting or collapsing once stackedStack straight up for extra height Stagger blocks to create a ramp so you can easily drive up Durable plastic construction Storage case with integrated carrying handle included Specs: Quantity: 10 blocks Individual block dimensions: 8-1/4" wide x 8-1/4" long x 7/8" tall Weight capacity: 30,000 lbs Lifetime warranty Note: The manufacturer does not recommend stacking more than 5 blocks high
Storage bag included. Interlocking blocks stack to different heights and can be positioned beneath jacks, stabilizers, or RV wheels to add enough lift to level your rig. Durable polyethylene construction.Features: Stackable blocks provide extra lift to level your trailer or motor home Position beneath jacks, stabilizers, or trailer wheels Interlocking design guarantees no shifting or collapsing once stackedStack straight up for extra height Stagger blocks to create a ramp so you can easily drive up Durable polyethylene construction Nylon tote bag with strap makes for easy travel and storage Specs: Quantity: 10 Block dimensions: 8-1/8" long x 8-1/8" wide x 1-3/8" tall Including handle: 10" long 1-Year warranty Stackers Blocks and Chock Stackers leveling blocks can be stacked directly on top of each other for supporting a trailer tongue, or you can stagger the blocks to create a ramp.
This trailer jack block makes leveling and stabilizing your RV or trailer simple. No more wrestling with wobbly jacks or stacking sketchy wood blocks. It's lightweight, sturdy, and takes the hassle out of setting up your campsite.Made in the USA: Proudly manufactured in the United States Specs: Dimensions: 8" tall Top diameter: 10" (9-1/8" recessed area) Base diameter: 12" Stacked height of 2 blocks: 14" tall Weight: 5.3 lbs Weight capacity: 6,000 lbs (1,500 lbs when 2 blocks are stacked) Lifetime warranty (magnets and screws excluded from coverage)
Filters
