A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
... Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 5 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
... Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 2 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
... Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 4 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when 2 pads are stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when 2 pads are stacked: 12-3/8" Quantity: 6 pads 2-Year warranty
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack the pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when stacked: 12-3/8" Quantity: 2 pads 2-Year warranty
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when 2 pads are stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when 2 pads are stacked: 12-3/8" Quantity: 4 pads 2-Year warranty
Base pad replaces the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pad works as a jack stand to support your trailer's tongue or stabilizer jack.Features: Base pad works as a jack stand to provide a platform that supports the weight of your tongue or stabilizer jack Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pad easy to carry and retrieve from under your RV Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 1 pad Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when 2 are stacked: 14" 2-Year limited warranty
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb swivel jack uses a drill adapter so the lift happens without the handle. It pivots up for clearance, and the SnapPad stays planted on soft ground.Specs Capacity and Lift: Maximum capacity: 2,000 lbs Maximum travel: 14" Tube Diameters: Outer tube: 2-1/4" outer diameter Inner tube: 2" outer diameter Mount Type: Swivel bolt-on Operation: Handle: sidewind, fold-down for power drill access Drill adapter: 3/4" integrated nut and 3/4" socket included Construction: Outer tube: steel with e-coat and glossy black powder coat Inner tube: steel with white zinc plating Foot plate: round, removable Included Accessories: Mounting hardware: (3) 3/8"-16 x 1" grade 5 hex bolts, (3) 3/8" flat washers, (3) 3/8"-16 grade 5 nylon lock nuts 3/4" socket for drill operation Warranty: Limited lifetime SnapPad Jack Stand Pad: Application: 6" round jack foot Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs Warranty: 2-Year Included Components: etrailer Manual Sidewind Trailer Jack w/ Drill Adapter - A-Frame - 14" Lift - 2K Replacement Pad for SnapPad Jack Stand Pad System - 6 Round Jack Foot
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb A-frame jack uses a drill adapter so the lift happens without the handle. The coupler lines up faster, and the SnapPad stays planted on soft ground.The jack uses a round removable foot plate for base support, and the Replacement Pad for SnapPad Jack Stand Pad System - 6" Round Jack Foot locks onto that foot to increase the contact area at the ground. With that added footprint in place, the jack stays planted on gravel, grass, or sand while the trailer remains supported during loading and while it sits unhitched.
This post-style mount carries 2 kayaks on edge, securing to your roof-rack crossbars and folding flat when not in use. Reinforced steel construction and padding on the post protect your boat, and included straps secure boats safely to the rack.Features: Universal carrier holds up to 2 kayaks on edge Post-style mount attaches to roof-rack crossbars Ultimate roof clearance with arms that fold down Improved strap management with AnchorHead tie-down feature Protective HullGuard padding on arms keeps your boat looking brand new Locks with 2 Same Key System (SKS) Cores (sold separately) SKS Cores can be changed out to make all your Yakima locks keyed alike Heavy Duty Straps with padded cam buckles secure boats to post Tightening strap gives you complete control over grip Padded buckles protect your boat and vehicle from scratches 2 Tie-down straps with cam buckles secure 2 kayaks to the carrier 2 Additional tie-down straps (Y05006 - sold separately) required to secure 3 or 4 kayaks 2 Bow/stern tie-downs with cam buckles secure 2 kayaks to your vehicle Hood anchors (Y07416 - sold separately) may be required if your vehicle doesn't have built-in tie-down points 2 Additional bow/stern tie-downs (Y05006 - sold separately) required to secure 3 or 4 kayaks Specs: Application: round, square, aero and most factory crossbars Capacity: up to 2 kayaks, depending on vehicle limitations Requires cinch straps (Y05006) to carry up to 4 kayaks Minimum crossbar spread: 24" Crossbar length for 4 kayaks must be a minimum of 66" Weight: 7.8 lbs Dimensions: 22" tall x 6" long x 5" wide Lifetime limited warranty
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
You pull in after a long drive, the ground looks fine, and you don't want to wonder if the jack will sink or a block will shift once everyone steps inside. This kit puts a wide drop leg and SnapPad under your jack, giving it a solid, steady base.Grip and Surface Protection Without Loose Pads The included SnapPad adds a thick rubber contact surface under the jack, helping it grip uneven terrain and protect concrete, asphalt, or gravel pads from metal contact.
Stackers lock together like building blocks, making them a versatile tool when setting up your camp. Use as pads for jacks and stabilizers or build a ramp shape to level your RV. Includes 10 square Stackers and storage bag.Features: Interlocking multi-use jack pads distribute weight on uneven ground Stack multiple when a taller jack pad is needed Create a pyramid shape to use as RV leveling blocks Compatible with other Stackers sizes and accessories 10" Square surface handles any size tongue jack, landing gear, or other supports Integrated handle for easy carrying and positioning Fabric storage bag is included Specs: Overall dimensions: 10" long x 10" wide 1-Year warranty
Stackers lock together like building blocks, making them a versatile tool when setting up your camp. Use as pads for jacks and stabilizers or build a ramp shape to level your RV. Includes 10 rectangular Stackers.Features: Interlocking multi-use jack pads distribute weight on uneven ground Stack multiple when a taller jack pad is needed Create a pyramid shape to use as RV leveling blocks Compatible with other Stackers sizes and accessories 10" x 20" Rectangular surface handles any size tongue jack, landing gear, or other supports Integrated handle for easy carrying and positioning Specs: Overall dimensions: 10" long x 20" wide 1-Year warranty
Stackers lock together like building blocks, making them a versatile tool when setting up your camp. Use as pads for jacks and stabilizers or build a ramp shape to level your RV. Includes 10 rectangular Stackers and storage bag.Features: Interlocking multi-use jack pads distribute weight on uneven ground Stack multiple when a taller jack pad is needed Create a pyramid shape to use as RV leveling blocks Compatible with other Stackers sizes and accessories 10" x 20" Rectangular surface handles any size tongue jack, landing gear, or other supports Integrated handle for easy carrying and positioning Fabric storage bag is included Specs: Overall dimensions: 10" long x 20" wide 1-Year warranty
Stackers lock together like building blocks, making them a versatile tool when setting up your camp. Use as pads for jacks and stabilizers or build a ramp shape to level your RV. Includes 10 square Stackers.Features: Interlocking multi-use jack pads distribute weight on uneven ground Stack multiple when a taller jack pad is needed Create a pyramid shape to use as RV leveling blocks Compatible with other Stackers sizes and accessories 10" Square surface handles any size tongue jack, landing gear, or other supports Integrated handle for easy carrying and positioning Specs: Overall dimensions: 10" long x 10" wide 1-Year warranty
Compact, post-style carrier lets you transport up to 4 kayaks side-by-side on your vehicle's roof rack. Arms fold down when not in use. Includes clamp-on mounting hardware and 4 tie-down straps.Space Saving Design The vertical design of the Nautic Stack lets you carry a kayak on its side. This opens up your roof rack to carry more kayaks or additional cargo. The rubber grips on each post help secure the kayak and prevent sliding during travel.
Filters
