Stale air and trapped heat can make your RV feel smaller than it is. This replacement roof vent with pivoting fan lets you aim airflow where it matters, helping your cabin stay fresh, breathable, and comfortable from daybreak to bedtime.
Replaces the smoke-colored, wedge-shaped, polypropylene plastic cover on your Ventline Ventadome RV roof vent.Features: Replaces the wedge-shaped, polypropylene lid on Ventadome roof vents for motor homes and enclosed trailers Works with Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 Measures: 14" x 14" Smoke color Made in the USA
The rain sensor on this powered roof vent automatically closes the dome and shuts off the fan in rain or snow. The reversible, 10-speed fan has a thermostat to regulate airflow inside your RV. Ceiling fan mode circulates air when vent is closed.Features: Roof vent with fan and thermostat moves air in and out of your RV, camper, or enclosed trailer Vent allows air to circulate while your RV remains locked and secure Rain sensor automatically closes the dome and shuts off the fan when it gets wet Rain sensor button on keypad allows you to deactivate the sensor 12V DC, variable-speed fan has 2 modes of operation In manual mode, 10 speed options let you increase or reduce airflow In auto mode, fan turns on and off based on preset temperature of thermostat Reversible fan can either bring air in or exhaust air out Circulates air like a ceiling fan when the vent is closed Remote control with LCD screen allows you to set the thermostat and the fan speed and direction Storage cradle mounts to wall Includes hardware and 2 AAA batteries Flush-mounted keypad on vent lets you operate the fan, the thermostat, and the rain sensor Translucent, smoke-colored dome (or lid) is made of high-density polypropylene Seamless, low-profile appearance when closed 2 Powered lifting arms support the dome to keep it open No hand cranking is needed to open dome - use remote or keypad Manual knob lets you operate dome in the event of a power loss Bug screen keeps insects out and is easy to remove for cleaning or maintenance Fuse-protected, ball bearing motor is sealed to keep out dust, dirt, and moisture Rubber weather seal helps prevent leaks when vent is closed Molded-in mounting flange is constructed of UV-resistant ABS plastic Smooth edges won't cut you during installation Mounting tabs on flange allow for no-drill, tool-free installation of FanMate vent cover (sold separately) White interior trim piece (or garnish), insulated electrical connectors, and hardware are included for installation Roof sealant sold separately 2-Wire design Black wire is power White wire is ground Specs: Fits: roofs 2" - 6-1/2" thick Opening size: 14" wide x 14" long Overall dimensions (outside of flange to outside of flange): 18-1/8" long x 16-1/2" wide Garnish dimensions: 16-1/4" long x 16-1/2" wide Vent extends above roof: When closed: 3-3/4" When open: 12-1/2" Overall fan diameter: 12" Fan capacity: 900 CFM Quantity of fan blades: 10 Power draw: 5 amps Warranty: 2-Year limited on vent assembly Limited lifetime on dome Note: Not for use above tubs, showers, or range cooking surfaces.
This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out.Features: Roof vent with fan moves air out of your RV, camper, or enclosed trailer Vent allows air to circulate while your RV remains locked and secure 12V DC, variable-speed fan has 4 speed options to let you increase or reduce airflow Exhausts air out Circulates air like a ceiling fan when the vent is closed Flush-mounted keypad on vent allows you to turn the fan on and off and set the fan speed Translucent, smoke-colored dome (or lid) is made of high-density polypropylene Seamless, low-profile appearance when closed Manual lift design has 2 arms to support the dome and keep it open Manual knob lets you operate dome Bug screen keeps insects out and is easy to remove for cleaning or maintenance Fuse-protected, ball bearing motor is sealed to keep out dust, dirt, and moisture Rubber weather seal helps prevent leaks when vent is closed Molded-in mounting flange is constructed of UV-resistant ABS plastic Smooth edges won't cut you during installation Mounting tabs on flange allow for no-drill, tool-free installation of FanMate vent cover (sold separately) White interior trim piece (or garnish), insulated electrical connectors, and hardware are included for installation Roof sealant sold separately 2-Wire design Black wire is power White wire is ground Specs: Fits: roofs 2" - 6-1/2" thick Opening size: 14" wide x 14" long Overall dimensions (outside of flange to outside of flange): 18-1/8" long x 16-1/2" wide Garnish dimensions: 16-1/4" long x 16-1/2" wide Vent extends above roof: When closed: 4-1/4" When open: 12-1/4" Overall fan diameter: 12" Fan capacity: 900 CFM Quantity of fan blades: 10 Power draw: 5 amps Warranty: 2-Year limited on vent assembly Limited lifetime on dome Note: Not for use above tubs, showers, or range cooking surfaces.
This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Rounded, plastic vent cover opens and closes with the simple spin of a handle.Features: Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure Efficient 12-volt centrifugal blower design Draws only 1-1/2 amps yet moves 100 CFM - low demand on battery Quiet operation Easy, one-handed opening and closing of dome Translucent cover allows some light through Fan uses 12-volt DC power Low-profile plastic dome Butt connectors and ring terminals sold separately Made in the USA Specs: Fan power: 12-volt DC 100 CFM Cover color: Smoke Rough opening size: 6-1/4" diameter Vent extends above roof: 2-3/8" Closed 3-1/4" Open 2-Year warranty Notes: Screws and sealer are not included.
Open this roof vent quickly and easily with the gear-free, spring-loaded handle. The handle locks the translucent, wedge-shaped dome into 10 different positions. Screen snaps out for easy cleaning. Installation kit and garnish sold separately.Features: Roof vent allows fresh air to enter and heat to escape while your RV, camper, or enclosed trailer remains locked and secure Easy-to-use handle lets you quickly open and close the vent from inside your RV Spring-loaded handle locks into 10 different positions No gears - opens vent faster than a standard crank handle or hand knob Ergonomic T-shape is easy to grip Aerodynamic, wedge-shaped dome (or lid) is made of durable smoke-colored polypropylene Translucent dome allows some light through Polar white screen snaps out for easy cleaning Vinyl weather seal helps keep water out when vent is closed Manual lift design - no need for electrical wiring White, 1/4" think mounting flange is built in UV-resistant, long-lasting specialty polymer plastic construction Smooth edges won't cut you during installation Works well with all roofing materials Interior trim piece (or garnish) and installation kit sold separately 4 Mounting points on flange allow for installation of a vent cover (sold separately) Made in the USA Specs: Rough opening size: 14-1/4" wide x 14-1/4" long Overall dimensions (outside of flange to outside of flange): 16-1/2" wide x 16-1/2" long Vent extends above roof: 4" When closed 9-1/2" When fully open Limited 2-year warranty Spring-Loaded Handle on Ventline E-Z Lift Ventadome The easy-to-use handle on the E-Z Lift Ventadome lets you quickly open and close the roof vent from inside your RV.
A cracked skylight can quickly turn into leaks and water damage if left unchecked. This smoke-tinted replacement fits 14" x 22" openings, seals tight with included sealant, and holds up to sun exposure to keep your RV dry and comfortable.Features: Replace a damaged or worn skylight on your RV, camper, or enclosed trailer Fits over a standard 14" wide x 22" long cutout - requires minimum roof thickness of 1-1/2" Durable polycarbonate is UV resistant and impact resistant Smoke-colored plastic tames bright light and reduces UV transmission Easy installation with included sealant Screws not included Made in the USA Specs: Overall dimensions: Skylight: 18" wide x 26" long Approximate bubble height: 5" Cutout dimensions: 14" wide x 22" long 1-Year warranty Simple Installation With Included Sealant Get a waterproof install using the included sealant approved for use with polycarbonate plastic.
Replaces the lid for your MaxxFan or MaxxFan Plus roof vent (MA00A04401K or MA00-04500K). Smoke-colored dome is constructed of high-density polypropylene.Features: Replaces the lid for your MaxxFan or MaxxFan Plus roof vent (MA00A04401K or MA00-04500K) Smoke-colored dome is constructed of high-density polypropylene Quantity: 1 replacement lid
This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch.Features: Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure Power lift opens and closes cover, eliminating hand cranking Simple to upgrade from non-powered model Wall remote switch (VC0533-03-A, VC0533-02-A; sold separately) provides convenient operation Translucent cover allows some light through Aerodynamic, wedge-shaped dome made of durable polypropylene Galvanized steel roof flange won't rust or corrode Snap-out screen is easy to clean Fan and power lift use 12-volt system - 110-volt hookup not required Electrical parts and interior garnish sold separately Made in the USA Specs: Fan and lift power: 12-volt DC Fan capacity: 100 CFM Cover color: Smoke Rough opening size: 14-1/4" x 14-1/4" Vent extends above roof: 4-1/2" Closed 10" Open 2-Year warranty Notes: Screws and sealer are not included.
This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, smoke-colored plastic vent cover opens and closes from inside with a hand-operated crank.Features: Roof vent allows fresh air to enter, and heat to escape, while trailer or RV remains locked and secure Simple, hand-operated crank rotates to open and close dome and eliminates the need for wiring Translucent cover allows some light through Aerodynamic, wedge-shaped dome made of durable polypropylene Galvanized steel roof flange won't rust or corrode Snap-out screen is easy to clean Polar White interior trim piece (or garnish) is included Made in the USA Specs: Included garnish fits roofs 1-7/8" to 3" thick Garnish leg length (depth): 2-1/8" Garnish color: Polar White Other garnish sizes are available (sold separately) Cover color: Smoke Rough opening size: 14-1/4" wide x 14-1/4" long Measurement of metal lip of vent: 16-1/2" x16-1/2" Garnish measurements: 16" x 16" Vent extends above roof: 4-1/2" Closed 10-3/4" Open 2-Year limited warranty Note: Screws and sealer are not included.
Replacement smoke colored vent cover for Ventline old-style rounded dome trailer roof vents.Features: Replacement cover for 14-1/4" x 14-1/4" roof vents Domed cover Easy to install and operate Smoke color Made of a polypropylene plastic Fits standard Ventadomes and post-1995 Elixir trailer roof vents 2-Year limited warranty
Replaces a lost or damaged wedge-shaped, smoke-colored polypropylene lid on your Ventline E-Z Lift Ventadome RV roof vent.Features: Replaces a lost or damaged wedge-shaped dome on your Ventline E-Z Lift Ventadome roof vent Fits V3092-601-00, V3092-603-00, V3094-601-00, V3094-601-00C, V3094-603-00, and V3094-603-00C Durable polypropylene construction Smoke color Made in the USA
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.The wide, louvered vent area at the back of the FanMate means that the cover provides more airflow in and out of your RV or trailer than standard covers. The angled louvers allow smoke, odors, and stale air to escape while keeping rain and debris out. EZClips Simplify Opening This FanMate vent cover comes with 4 EZClip pins.
A cracked skylight can quickly turn into leaks and water damage if left unchecked. This smoke-tinted neo-angle replacement fits 24" x 12" openings, resists UV rays, and seals tight with included sealant to keep your RV dry and comfortable.Features: Replace a damaged or worn neo angled skylight on your RV, camper, or enclosed trailer Fits over a 24" wide x 12" long angled cutout - requires minimum roof thickness of 1-1/2" Durable polycarbonate is UV resistant and impact resistant Smoke-colored plastic tames bright light and reduces UV transmission Easy installation with included sealant Screws not included Made in the USA Specs: Overall dimensions: Skylight: 27" Wide x 14-1/2" Approximate bubble height: 5" Cutout dimensions: 24" wide x 12" long 1-Year warranty Takes the Guesswork Out of Replacement Sizing A big part of replacing a skylight is confirming the opening size when the old unit doesn't provide clear measurements.
A cracked skylight can quickly turn into leaks and water damage if left unchecked. This smoke-tinted replacement fits 16" x 26" openings, seals tight with included sealant, and holds up to sun exposure to keep your RV dry and comfortable.Resists Sun Damage: UV-resistant polycarbonate reduces cracking and discoloration over time. Reduces Harsh Light: Smoke-tinted material softens sunlight entering the interior space. Maintains Installed Shape: Rigid construction prevents warping or lifting between fasteners.
Stay safe. Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID light bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 20-1/2" long x 1" wide x 3/4" thick Distance between mounting holes: 19-5/8" Diodes: 21 Voltage: 12V Power draw: Stop/turn: 0.265 amps Tail: 0.24 amps Reverse: 0.30 amps Lifetime warranty on LEDs
A cracked skylight can quickly turn into leaks and water damage if left unchecked. This smoke-tinted replacement fits 18" x 30" openings, seals tight with included sealant, and holds up to sun exposure to keep your RV dry and comfortable.Features: Replace a damaged or worn skylight on your RV, camper, or enclosed trailer Fits over an 18" wide x 30" long cutout - requires minimum roof thickness of 1-1/2" Durable polycarbonate is UV resistant and impact resistant Smoke-colored plastic tames bright light and reduces UV transmission Easy installation with included sealant Screws not included Made in the USA Specs: Overall dimensions: Skylight: 21-1/2" wide x 33-1/2" long Approximate bubble height: 5" Cutout dimensions: 18" wide x 30" long 1-Year warranty Simple Installation With Included Sealant Get a waterproof install using the included sealant approved for use with polycarbonate plastic.
Stay safe. Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers.Features: ID light bar for trailers over 80" wide Smoke lens with red LEDs Black polycarbonate housing Surface mount - Hardware not included 3-Wire pigtail - Hardwires to trailer P2 rated and DOT compliant Specs: Dimensions: 15" long x 1-3/8" wide x 5/8" thick Distance between mounting holes: 14-1/8" Diodes: 3 Voltage: 12V Amps: 0.038 Lifetime warranty on LEDs
A cracked skylight can quickly turn into leaks and water damage if left unchecked. This smoke-tinted replacement fits 18" x 24" openings, seals tight with included sealant, and holds up to sun exposure to keep your RV dry and comfortable.Features: Replace a damaged or worn skylight on your RV, camper, or enclosed trailer Fits over an 18" wide x 24" long cutout - requires minimum roof thickness of 1-1/2" Durable polycarbonate is UV resistant and impact resistant Smoke-colored plastic tames bright light and reduces UV transmission Easy installation with included sealant Screws not included Made in the USA Specs: Overall dimensions: Skylight: 21-1/2" wide x 27-1/2" long Approximate bubble height: 5" Cutout dimensions: 18" wide x 24" long 1-Year warranty Simple Installation With Included Sealant Get a waterproof install using the included sealant approved for use with polycarbonate plastic.
This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, smoke-colored plastic vent cover opens and closes with a hand-operated crank.Features: Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure Simple to upgrade from non-powered model Basic, hand-operated crank rotates to open and close dome Switch to turn the fan on/off is mounted on the vent Translucent cover allows some light through Aerodynamic, wedge-shaped dome made of durable polypropylene Galvanized steel roof flange won't rust or corrode Snap-out screen is easy to clean Polar White interior trim piece (or garnish) is included Fan uses 12-volt DC power Wiring sold separately Made in the USA Specs: Included garnish fits roofs 1-7/8" to 3" thick Garnish leg length (depth): 2-1/8" Garnish color: Polar White Other garnish sizes are available (sold separately) Fan power: 12-volt DC 100 CFM Cover color: Smoke Rough opening size: 14-1/4" wide x 14-1/4" long Vent extends above roof: 4-1/2" Closed 10" Open 2-Year warranty Notes: Screws and sealer are not included.
A cracked skylight can quickly turn into leaks and water damage if left unchecked. This smoke-tinted neo-angle replacement fits 20" x 8" openings, resists UV rays, and seals tight with included sealant to keep your RV dry and comfortable.Resists Sun Damage: UV-resistant polycarbonate reduces cracking and discoloration over time. Reduces Harsh Light: Smoke-tinted material softens sunlight entering the interior space. Maintains Installed Shape: Rigid construction prevents warping or lifting between fasteners.
Leaking skylight or unfinished interior? This kit replaces both the roof skylight and interior garnish in one step. It seals out water, softens incoming light, and covers rough edges for a tidy, finished look inside your RV.Covers Roof And Ceiling Edges: Skylight flange seals the roof while garnish covers interior foam and wood. Controls Light And Glare: Smoke skylight reduces brightness while white garnish diffuses incoming light inside. Resists Sun Damage: UV-resistant polycarbonate reduces cracking and discoloration over time.
The built-in rain shield on this powered roof vent protects the interior of your RV or camper from rainwater. The reversible, 10-speed fan has a thermostat to regulate airflow inside your RV. Ceiling fan mode circulates air when vent is closed.With the rain shield, there is also no need to install a separate vent cover. The smoke dome on the rain shield is constructed of durable high-density polypropylene. When it's closed, the dome provides a seamless, low-profile appearance.
Filters
