Carpeted bunks wear out and drag against your hull. Amber polyvinyl rollers trade that drag for a smooth, easy glide, even in shallow water. Made to last a lifetime, they resist sun and water without marking your boat.Poly rollers also stand up to repeated use without breaking down as quickly as carpet or rubber, giving you reliable performance season after season.
Mount this durable poly plastic pad to your boat trailer's frame or axle to add a layer of protection between the frame or axle and your boat.Features: Poly plastic pad protects hull or keel of your boat Helps to absorb road shock if boat makes contact with it during trailering Mounting holes allow for simple installation onto crossmember - hardware not included Made in the USA Specs: Dimensions: 10" long x 1-1/2" wide Distance between mounting holes (center to center): 4-3/4" If your boat trailer has crossmembers or support frames that go from side to side, frame rail to frame rail, you can use one or more of these sturdy poly plastic pads to maximize protection of your boat's hull and keel during loading, transport and unloading.
Carpeted bunks wear out and drag against your hull. Amber polyvinyl rollers trade that drag for a smooth, easy glide, even in shallow water. Made to last a lifetime, they resist sun and water without marking your boat.Keep Your Brakes Dry: Because you won't have to back into deep water, these help keep your truck's tires and brakes drier. Poly Rollers for Longevity: Amber poly rollers resist water, sun, and salt better than carpet or rubber, and won't mark your hull. Made to Last: Galvanized steel resists rust and corrosion.
Caster attaches to a 2" jack inner tube to make it easier to move your trailer. Easily removes for travel. Reduces jack's overall capacity to 1,200 lbs.
Replacement polypropylene wheel.Features: 6" Replacement wheel for trailer jacks Fits Dutton-Lainson Jack models 2400, 3400, 6400, 6414, 6440, 6445, 6460, 6724 Includes axle bolt and nut Axle bolt hole size: 1/2" Bolt size: 1/2" Capacity: 800 - 1,200 lbs Made in the USA 22440 Replacement 6" Poly Wheel for Trailer Jacks by Dutton-Lainson Model 6806
Features: Dual poly wheel for model Dutton-Lainson Model 6800 trailer tongue swivel jack Wheel measures 6" in diameter and 1-15/16" wide Mounting bolt measures 6" long and 1/2" in diameter Made in the USA 22441 Dutton-Lainson Replacement Wheel for Jacks
Route fresh-water pipes in your RV with this 90-degree elbow fitting. Connects two 1/2" female NPT fittings on hoses, collars, and pipe adapters.Features: Elbow connects pipes and hoses in your RV fresh-water plumbing system Used for repairing leaky connections or installing new lines 1/2" Male NPT threads connect to female fittings Poly alloy construction is durable and resistant to stress cracking
Plastic coupler joins the female ends of fittings or hoses in a variety of freshwater applications. Has 1/2" male NPT threading on both ends.Features: 1/2" Male NPT connections join hoses, appliances, tanks, or other threaded fittings Can be used to make repairs when a small section of pipe needs to be replaced Poly plastic construction is durable and resistant to stress cracking
Backing up in the dark? This light's got your back. It fits right into your trailer's 6-1/2" cutout and throws steady white light through a smoked lens. It's easy to wire, holds up to road grime, and won't overload your system.Simple, Secure Wiring: 2-pin PL-3 plug mates with straight or right-angle pigtails for fast, no-fuss installation. Built to Handle the Road: Poly lens and sealed housing hold up to gravel spray, washdowns, and brutal seasonal shifts. Low Draw, High Output: Draws just 0.26 amps at 12V, enough brightness to cut through the dark without tripping a circuit.
Replace a worn or broken trailer marker light with this red incandescent clearance/side marker light. Stud-mounted light grounds through the mounting stud and includes a 24" lead wire.Features: Replaces a red clearance or side marker light on your trailer Marks the side or rear of your trailer to help improve visibility on the road Incandescent bulb provides dependable trailer lighting Integrated mounting stud secures the light to your trailer Mounting stud serves as the ground when installed on a metallic surface Single 24" lead wire connects to power Welded lens and housing create a single sealed unit Submersible design stands up to wet conditions DOT compliant for road use Specs: Peterson part number: 151R Application: Clearance light or side marker light Light color: Red Lens color: Red Bulb type: Incandescent Voltage: 12V Bulb count: 1 Mounting type: Stud mount Ground type: Stud ground Lead wire length: 24" Overall dimensions: 2.12" long x 1.7" wide x 1.12" tall Shape: Rectangular Replaceable bulb: No Removable lens: No Integral reflex: No PC rated: No Regulatory compliance: DOT Submersible: Yes Container type: Poly bag
Keep your fifth-wheel trailer hitch clean and dry with this heavy-duty, waterproof cover. Elastic cords with hooked ends attach to above-the-bed base rails. Rip-and-grip straps fit around hitches with below-the-bed rails.
Filters
