Bunk-board kit lets you build your own guide-ons to ease loading of your boat onto your trailer. Kit includes 90-degree-angled tubes, brackets, hardware, and enough marine-grade carpet for (2) 69" long 2x4 boards (not included).Features: Bunk-board kit lets you create 2 guide-ons to support your boat and keep it centered while you're loading it onto your trailer 2x4 Lumber for bunk boards not included 90-Degree-angled tubes let you mount the bunks close to your boat Great for narrow boats Bolt-on installation - clamp onto top or bottom of your trailer's frame Pre-galvanized steel construction is sturdy and corrosion-resistant Marine-grade carpeting lines bunk boards to protect your boat's finish 2 Rolls included to cover 2 boards U-bolts, brackets, and mounting hardware included Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/2" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) are required to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Carpeting dimensions (per roll): 11" wide x 12' long Maximum 2x4 length for carpeting: 69" Pre-Galvanized Steel Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized.
If your bow shifts off center during loading, it can contact the trailer. This 3-inch bow roller assembly cushions the bow and helps center the boat, with end bells for added protection so you can load with less contact.These 2' guide-ons use black carpeted 2x4 bunk boards to help guide the boat onto the trailer, giving the hull a defined path during loading and unloading.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat. The bunk boards then tilt to conform to the boat's hull.
Get better visibility for launching and loading your boat with these post extensions. Slide extensions into the top of your existing bunk-style guide-ons and secure with included hardware. Adjustable posts give you up to 37" of added height.Line up the mounting holes of the extension, guide-on, and bunk Insert the included mounting hardware into the mounting holes Tighten with a 9/16" wrench Repeat this process with the other guide-on, and you'll be ready to launch and load your boat with ease.
Easily load your pontoon boat with these bunk-board-style guide-ons. The boards are covered with marine-grade carpet and their height can be adjusted during installation. Fits trailer frames up to 3" wide x 4-1/4" tall. ... The bunk-board-style guides will help to center your pontoon boat during loading and to support the boat during transport. Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat. The bunk boards then tilt to conform to the boat's hull.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.It's a cleaner, lower-maintenance option made to hold up through years of loading and unloading. Plus, this kit comes with end caps. Not only will your bunks have a clean, seamless look, you won't have to deal with exposed carpet staples and they help prevent board rot. Installs Over Standard Bunk Boards You'll need to remove the carpet from your bunks before installing these wraps, but once they're on, you're done.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.It's a cleaner, lower-maintenance option made to hold up through years of loading and unloading. Plus, this kit comes with end caps. Not only will your bunks have a clean, seamless look, you won't have to deal with exposed carpet staples and they help prevent board rot. Installs Over Standard Bunk Boards You'll need to remove the carpet from your bunks before installing these wraps, but once they're on, you're done.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.It's a cleaner, lower-maintenance option made to hold up through years of loading and unloading. Plus, this kit comes with end caps. Not only will your bunks have a clean, seamless look, you won't have to deal with exposed carpet staples and they help prevent board rot. Installs Over Standard Bunk Boards You'll need to remove the carpet from your bunks before installing these wraps, but once they're on, you're done.
Give your trailer bunks a clean, finished look with this 4-pack of endcaps. Perfect for single-trailer installs or replacements. Designed for 2x4 boards and pairs with Caliber bunk wrap. ... Perfect for One-Trailer Projects This 4-pack gives you everything you need to finish off a pair of standard 2x4 bunk boards. Whether you're installing Caliber bunk wrap for the first time or replacing missing caps, this kit is sized just right for single-trailer upgrades.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.It's a cleaner, lower-maintenance option made to hold up through years of loading and unloading. Plus, this kit comes with end caps. Not only will your bunks have a clean, seamless look, you won't have to deal with exposed carpet staples and they help prevent board rot. Installs Over Standard Bunk Boards You'll need to remove the carpet from your bunks before installing these wraps, but once they're on, you're done.
Buying wrap by the roll? These 2x4 endcaps finish off your bunks with a clean look. Includes 24 black caps - great for trailer pros and marine shops handling multiple projects. Hardware not included.Highlights Designed for 2x4 Bunks: Caps fit standard trailer bunk boards for a finished look. Great for Bulk Projects: Includes 24 endcaps ideal for dealers and multi-trailer installs.
Give your trailer bunks a clean, finished look with this 4-pack of endcaps. Perfect for single-trailer installs or replacements. Designed for 2x6 boards and pairs with Caliber bunk wrap. ... Perfect for One-Trailer Projects This 4-pack gives you everything you need to finish off a pair of standard 2x6 bunk boards. Whether you're installing Caliber bunk wrap for the first time or replacing missing caps, this kit is sized just right for single-trailer upgrades.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.It's a cleaner, lower-maintenance option made to hold up through years of loading and unloading. Plus, this kit comes with end caps. Not only will your bunks have a clean, seamless look, you won't have to deal with exposed carpet staples and they help prevent board rot. Installs Over Standard Bunk Boards You'll need to remove the carpet from your bunks before installing these wraps, but once they're on, you're done.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.It's a cleaner, lower-maintenance option made to hold up through years of loading and unloading. Plus, this kit comes with end caps. Not only will your bunks have a clean, seamless look, you won't have to deal with exposed carpet staples and they help prevent board rot. Installs Over Standard Bunk Boards You'll need to remove the carpet from your bunks before installing these wraps, but once they're on, you're done.
Give your trailer bunks a clean, finished look with this 4-pack of endcaps. Perfect for single-trailer installs or replacements. Designed for 2x4 boards and pairs with Caliber bunk wrap. ... Perfect for One-Trailer Projects This 4-pack gives you everything you need to finish off a pair of standard 2x4 bunk boards. Whether you're installing Caliber bunk wrap for the first time or replacing missing caps, this kit is sized just right for single-trailer upgrades.
Give your trailer bunks a clean, finished look with this 4-pack of endcaps. Perfect for single-trailer installs or replacements. Designed for 2x6 boards and pairs with Caliber bunk wrap. ... Perfect for One-Trailer Projects This 4-pack gives you everything you need to finish off a pair of standard 2x6 bunk boards. Whether you're installing Caliber bunk wrap for the first time or replacing missing caps, this kit is sized just right for single-trailer upgrades.
Working on multiple trailers? This wrap cuts drag at the ramp so your boats glide on and off with less effort. And with 250' to work with, you'll have plenty of wrap for large-scale projects or for stocking your boat supply store.Great Fit for Aluminum Boats If you're tired of replacing your boat trailer bunk carpets and are trailering a raw aluminum boat, pontoon, or personal watercraft (PWC), this bunk wrap is a smart upgrade. It holds up better than carpet and makes loading and unloading easier.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.It's a cleaner, lower-maintenance option made to hold up through years of loading and unloading. Plus, this kit comes with end caps. Not only will your bunks have a clean, seamless look, you won't have to deal with exposed carpet staples and they help prevent board rot. Installs Over Standard Bunk Boards You'll need to remove the carpet from your bunks before installing these wraps, but once they're on, you're done.
Buying wrap by the roll? These 2x6 endcaps finish off your bunks with a clean look. Includes 24 black caps - great for trailer pros and marine shops handling multiple projects. Hardware not included.Highlights Designed for 2x6 Bunks: Caps fit standard 2x6 trailer bunk boards for a finished look. Great for Bulk Projects: Includes 24 endcaps ideal for dealers and multi-trailer installs.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.It's a cleaner, lower-maintenance option made to hold up through years of loading and unloading. Plus, this kit comes with end caps. Not only will your bunks have a clean, seamless look, you won't have to deal with exposed carpet staples and they help prevent board rot. Installs Over Standard Bunk Boards You'll need to remove the carpet from your bunks before installing these wraps, but once they're on, you're done.
Buying wrap by the roll? These 2x6 endcaps finish off your bunks with a clean look. Includes 24 light gray caps - great for trailer pros and marine shops handling multiple projects. Hardware not included.Highlights Designed for 2x6 Bunks: Caps fit standard 2x6 trailer bunk boards for a finished look. Great for Bulk Projects: Includes 24 endcaps ideal for dealers and multi-trailer installs.
Buying wrap by the roll? These 2x4 endcaps finish off your bunks with a clean look. Includes 24 light gray caps - great for trailer pros and marine shops handling multiple projects. Hardware not included.Highlights Designed for 2x4 Bunks: Caps fit standard trailer bunk boards for a finished look. Great for Bulk Projects: Includes 24 endcaps ideal for dealers and multi-trailer installs.
Working on multiple trailers? This wrap cuts drag at the ramp so your boats glide on and off with less effort. And with 250' to work with, you'll have plenty of wrap for large-scale projects or for stocking your boat supply store.Great Fit for Aluminum Boats If you're tired of replacing your boat trailer bunk carpets and are trailering a raw aluminum boat, pontoon, or personal watercraft (PWC), this bunk wrap is a smart upgrade. It holds up better than carpet and makes loading and unloading easier.
Filters
