Improve the stability of your parked and leveled RV with these basepads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Basepads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick basepads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when 2 pads are stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when 2 pads are stacked: 12-3/8" Quantity: 4 pads 2-Year warranty
Basepad replaces the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pad works as a jack stand to support your trailer's tongue or stabilizer jack.Features: Basepad works as a jack stand to provide a platform that supports the weight of your tongue or stabilizer jack Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pad easy to carry and retrieve from under your RV Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 1 pad Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when 2 are stacked: 14" 2-Year limited warranty
Replace the bricks and blocks normally needed when positioning your trailer jack with this basepad. 7" Tall pad works as a jack stand to support your trailer tongue's weight during storage.Features: Basepad works as a jack stand to provide a platform that supports the weight of your trailer tongue Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick basepads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs Dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Quantity: 1 pad 2-Year warranty
Levelers help keep your RV flat while on uneven terrain. Included chocks support levelers. Anti-slip rubber mats keep leveler and chock in place. Compact size easily fits between tires during setup.
Get more traction and stability for your camper's scissor jack by snapping these durable, molded rubber pads onto the base. Fits almost any scissor jack with a bowtie base and installs permanently so you never have to find a spot to store it.Features: Snaps onto the base of your scissor jack for added traction and stability Increases surface area to help prevent sinking into soft ground Grips uneven terrain and prevents metal from rusting or bending Serves as a cushion so metal foot won't crack or chip your driveway Protects footpad from rocks and roots Won't crack, break, or crumble Molded EPDM rubber is more durable than crumb rubber Has built-in drain holes to release moisture, helping to prevent corrosion Installs permanently - no need to remove and store Just pop the shoe on, use a screwdriver to stretch the rubber over the base, and secure with included ties Made in the USA Specs: Application: 2,500-lb to 9,000-lb scissor jacks with bowtie basesBase dimensions: 8-3/4" long x 4-3/8" wide Adapters included to fit 8" long bases External pad dimensions: 11" long x 6-1/2" wide Quantity: 2 pads 2-Year limited warranty
Improve the stability of your parked and leveled RV with these basepads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack the pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Basepads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick basepads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when stacked: 12-3/8" Quantity: 2 pads 2-Year warranty
Basepads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizer jacks. ... Features: Basepads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 5 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Leveler helps keep your RV flat while on uneven terrain. Included chock supports leveler. Anti-slip rubber mat keeps leveler and chock in place. Compact size easily fits between tires during setup.
Basepads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizer jacks. ... Features: Basepads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 4 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Improve the stability of your parked and leveled RV with these basepads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Basepads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick basepads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when 2 pads are stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when 2 pads are stacked: 12-3/8" Quantity: 6 pads 2-Year warranty
Basepads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizer jacks. ... Features: Basepads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 2 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Replaces the rubber basepad on your Yakima LandingPad 11.Features: Replaces the rubber basepad on your Yakima LandingPad 11 (Y00233) 1 Basepad included
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
Upgrade the strength and durability of your stabilizer jack feet by adding these permanent SnapJack feet to the bottom. Increased surface area creates a more robust footprint compared to a standard foot. Ideal for sloped or uneven surfaces.Features: SnapJack foot improves the stability of your stabilizer jack (sold separately) Thicker and stronger than standard feet Improved stability and grip on uneven terrain Anti-slip basepads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Added height on the SnapJack feet prevents the stabilizers from being over-extended Includes all hardware to install SnapJack feet to stabilizers Made in the USA Specs: Applications: Lippert PSX1 Lippert PSX2 Lippert Quick Drop Stabilizer Rock Solid Stabilizer Systems Quantity: 4 feet Overall dimensions: 8" wide x 8" long x 2-3/4" tall Foot dimensions: 5-1/2" diameter x 1/4" tall Weight: 5.4 lbs each 2-Year limited warranty
... Compatible with 8-1/2" x 8-1/2" plastic leveling blocks or 12" leveling buckets. Anti-slip base adds 3/4" of height.Features: Protects your plastic levelers from deterioration that can happen after long-term use Anti-slip basepads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when lifting your camper Provides significantly more grip compared to using wooden blocks Extra large drainage holes help to prevent mud and dirt from clinging to your jack feet Made in the USA Specs: Quantity: 1 pad Overall dimensions: 14" x 14" x 1-1/4" Fits most 12" leveling buckets Weight: 4.5 lbs 2-Year warranty
Replaces foot and #1 pad for your Yakima BaseLine roof rack tower manufactured after 2015. The foot easily clips onto the bottom of the tower and the pad is specifically designed to fit the shape and contour of your roof.Features: Replaces Yakima roof rack foot and #1 foot pad Works with BaseLine roof rack tower manufactured after 2015 Foot easily clips onto the bottom of the roof rack tower Rubber pad is custom designed to fit the shape and contour of your vehicle's roof
Replaces foot and #5 pad for your Yakima BaseLine roof rack tower manufactured after 2015. The foot easily clips onto the bottom of the tower and the pad is specifically designed to fit the shape and contour of your roof.Features: Replaces Yakima roof rack foot and #5 foot pad Works with BaseLine roof rack tower manufactured after 2015 Foot easily clips onto the bottom of the roof rack tower Rubber pad is custom designed to fit the shape and contour of your vehicle's roof
Replaces foot and #4 pad for your Yakima BaseLine roof rack tower manufactured after 2015. The foot easily clips onto the bottom of the tower and the pad is specifically designed to fit the shape and contour of your roof.Features: Replaces Yakima roof rack foot and #4 foot pad Works with BaseLine roof rack tower manufactured after 2015 Foot easily clips onto the bottom of the roof rack tower Rubber pad is custom designed to fit the shape and contour of your vehicle's roof
Replaces foot and #2 pad for your Yakima BaseLine roof rack tower manufactured after 2015. The foot easily clips onto the bottom of the tower and the pad is specifically designed to fit the shape and contour of your roof.Features: Replaces Yakima roof rack foot and #2 foot pad Works with BaseLine roof rack tower manufactured after 2015 Foot easily clips onto the bottom of the roof rack tower Rubber pad is custom designed to fit the shape and contour of your vehicle's roof
Replaces foot and #6 pad for your Yakima BaseLine roof rack tower manufactured after 2015. The foot easily clips onto the bottom of the tower and the pad is specifically designed to fit the shape and contour of your roof.Features: Replaces Yakima roof rack foot and #6 foot pad Works with BaseLine roof rack tower manufactured after 2015 Foot easily clips onto the bottom of the roof rack tower Rubber pad is custom designed to fit the shape and contour of your vehicle's roof
Replaces foot and #3 pad for your Yakima BaseLine roof rack tower manufactured after 2015. The foot easily clips onto the bottom of the tower and the pad is specifically designed to fit the shape and contour of your roof.Features: Replaces Yakima roof rack foot and #3 foot pad Works with BaseLine roof rack tower manufactured after 2015 Foot easily clips onto the bottom of the roof rack tower Rubber pad is custom designed to fit the shape and contour of your vehicle's roof
Filters
