Need support up front but keeping your Tacoma bed light? This kit adds 1-3/4" of lift in the front and 2" in the rear, with matched coils, leaf springs, struts, and shocks to improve ride, stance, and control with no guesswork.This kit brings the ride height back to spec with matched coils and Nitrocharger Plus struts tuned for up to 330 lbs of gear. Lifted Stance, Balanced Feel With 1-3/4" of lift up front and 2" in the rear, your truck sits level and looks right without riding rough.
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.Also, LoadLifter 5000 comes with Air Lift's exclusive roll plates, which both protect your air springs and beef up the load capacity of the springs. This system installs with the included brackets and hardware.
Clamp these liftbrackets onto your trailer's tongue to get excellent clearance for items mounted above your trailer frame. Rotating design lets you quickly and easily lift the chains of your Blue Ox SwayPro weight-distribution system.Features: Clamp-on liftbrackets are low-profile, allowing clearance for certain accessories mounted above the trailer frame Rotating latches make lifting chains quick and easy Included wrench provides leverage needed to rotate latches Designed for use with Blue Ox SwayPro weight-distribution systems 2 Latch brackets and installation hardware included Specs: Length of clamp-on bracket: 4" Width of clamp-on bracket: 2-1/2" Width of rotating portion: 6"
Clamp or bolt these liftbrackets onto your trailer frame to increase mounting options and provide clearance for items above your trailer frame. Rotating design lets you quickly lift the chains of your Blue Ox SwayPro weight distribution system.Features: Liftbrackets increase versatility by attaching in 2 different ways Drilling through trailer frame and bolting Clamping onto your trailer frame for a no-drill option Multiple holes increase mounting options for various trailer frame heights Provide clearance for accessories mounted above the trailer frame Rotating latches make lifting chains quick and easy Included wrench provides leverage needed to rotate latches Designed for use with Blue Ox SwayPro weight distribution systems 2 Latch brackets and installation hardware included Made in the USA Specs: Frame height: 3" - 6" 1-Year warranty
These clamp-on brackets are specially designed for 4" trailer frames where the body mount interferes with conventional, top-mounted latches. Used with the Blue Ox SwayPro weight-distribution system.Features: Liftbrackets are specially designed for 4" trailer frames where the body mount interferes with conventional, top-mounted latches Provide clearance for accessories mounted above the trailer frame No drilling required - brackets clamp onto trailer frame Rotating latches make lifting chains quick and easy Included wrench provides leverage needed to rotate latches Designed for use with Blue Ox SwayPro weight-distribution systems 2 Latch brackets and installation hardware included Made in the USA
Replaces worn or damaged pin on the chain liftbracket of your weight distribution system. Measures 3/16" diameter. Zinc-plated steel construction is corrosion resistant. Includes 1 pin.Features: Replaces worn or damaged pin on the chain liftbracket of your weight distribution system Measures 3/16" diameter Zinc-plated steel construction is corrosion resistant Includes 1 pin
Designed to work with Ride-Rite air spring kit F2400 when it's installed on a lifted truck. This long spacer bracket bridges the gap between your vehicle's suspension and your air springs.Features: Long axle spacer bracket closes the gap between your Firestone Ride-Rite air springs and your lifted vehicle Allows air springs to make better contact with your lifted truck Works with Firestone Rite-Rite air helper spring kit (F2400) Made in the USA Specs: Length: 2-7/8" Quantity: 1 bracket
Replaces the lower bracket on your Air Lift LoadLifter 5000 air helper springs 57390 or 57398. Includes lower bracket components needed for service replacement.Features: Replaces the lower bracket on your Air Lift LoadLifter 5000 air helper springs 57390 or 57398 Includes lower bracket components for service replacement Made in the USA Fits: Air Lift LoadLifter 5000: 57390 and 57398
Clamp these liftbrackets onto your trailer's tongue to get excellent clearance for items mounted above your 8" trailer frame. Rotating design lets you quickly and easily lift the chains of your Blue Ox SwayPro weight-distribution system.Features: Clamp-on liftbrackets are low-profile, allowing clearance for certain accessories mounted above the trailer frame Rotating latches make lifting chains quick and easy Included wrench provides leverage needed to rotate latches Designed for use with Blue Ox SwayPro weight-distribution systems 2 Latch brackets and installation hardware included Tape installs between the brackets and the trailer frame to prevent oxidation Fits 8" trailer frames Made in the USA
Replaces one of the liftbrackets that came standard with your Curt weight distribution system. Bracket mounts to your trailer frame with the included hardware and provides an attachment point for your lift chain.Features: Replaces 1 liftbracket on your weight distribution system Works with Curt trunnion-bar and round-bar weight distribution systems Provides the attachment point for your lift chain Fits trailer frames up to 2-3/4" wide Resists rust with durable black powder coat finish Includes: 1 Liftbracket (1) 2" Long x 1/2" diameter bolt (1) 4" Long x 1/2" diameter bolt 1 Safety clip
Mount these brackets to your trailer frame so that you can secure the lift chains on your TorkLift SuperHitch Everest weight distribution system. Necessary hardware included.Features: Replacement brackets secure lift chains on your TorkLift SuperHitch weight distribution system Included hardware lets you either bolt or weld the brackets to your trailer frame Quantity: 2
Replaces the lower bracket on your Air Lift LoadLifter 5000 air helper springs 57396. Includes lower bracket components needed for service replacement.Features: Replaces the lower bracket on your Air Lift LoadLifter 5000 air helper springs 57396 Includes lower bracket components for service replacement Made in the USA Fits: Air Lift LoadLifter 5000: 57396
Designed to work with Ride-Rite air spring kit F2400 when it's installed on a lifted truck. This short spacer bracket bridges the gap between your vehicle's suspension and your air springs.Features: Short axle spacer bracket closes the gap between your Firestone Ride-Rite air springs and your lifted vehicle Allows air springs to make better contact with your lifted truck Works with Firestone Rite-Rite air helper spring kit (F2400) Includes 1 bracket Made in the USA
Use this extension system for lifted vehicles. The axle-bracket spacer kit bridges the gap between your air bags and your lifted suspension so that your air suspension system makes better contact and provides the support you need, when you need it.Use this extended axle-bracket kit to eliminate the extra space between your Firestone air springs and your lifted suspension. This kit gives you 3 inches of extended closure compared with a standard bracket.
Use this extension system for lifted vehicles. The axle-bracket spacer kit bridges the gap between your air bags and your lifted suspension so that your air suspension system makes better contact and provides the support you need, when you need it.Use this extended axle-bracket kit to eliminate the extra space between your Firestone air springs and your lifted suspension. This kit gives you 2 inches of extended closure compared with a standard bracket.
Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for single axle applications. Compatible with #10 Torflex axles with 2,300 to 4,000-lb capacities.Features: Lift kit raises your trailer frame to provide 2-5/8" additional clearance between trailer frame and axle Designed for use on trailers with a single #10 Torflex axle with 2,300 to 4,000-lb capacities Spacers attach to side-mount brackets on your trailer's frame Not compatible with top-mounted torsion axles Includes: (2) #10 Frame spacers (003-377-02) 12 Plain washers (005-111-00) 8 Locking hex nuts (006-126-00) 8 Hex screws (007-177-00) Distance between bolt holes center to center: 8" Note: Lift kit cannot be used with Torflex axles with 3" high profile brackets or Norco brackets.
You've been thinking about lifting your Jeep. This is the kit that helps you finally do it right. With dual rate springs, full hardware, and room for 35s, it delivers the stance, ride, and confidence to start building the Jeep youve imagined.It's a straightforward kit built for real-world use. Specs: Ride Height & Tire Fitment: Approximate lift: 2-1/2" (based on 2021 Wrangler Unlimited, 3.6L V6) Max Tire Size: 35" Coil Spring Details: Front spring rate: 104 / 140 lbs/in (initial/ride) Rear spring rate: 135 / 220 lbs/in (initial/ride) Included Components: Dual rate front and rear coil springs Front & rear bump stop extensions (including 0.5" front strike pad spacers) Shock extensions Front & rear track bar relocation brackets Front end link extensions Rear sway bar drop spacers All required installation hardware Warranty: 2-year limited
Running a bumper up front and gear in the back? This BP-51 kit adds 2" of lift and is tuned for a 330 lb constant rear load. Matched springs, shocks, and hardware give your 4-door Jeep JK better control, stance, and comfort on and off the trail.You get consistent ride height and confident handling even when you're packed full-time. Alignment Back Where It Belongs Lift changes geometry and this kit addresses it. It includes a rear panhard relocation bracket and spring packers to correct alignment and help your Jeep track straight after the install.
Running a bumper up front and gear in the back? This BP-51 kit adds 2" of lift and is tuned for a 330 lb constant rear load. Matched springs, shocks, and hardware give your 2-door Jeep JK better control, stance, and comfort on and off the trail.You get consistent ride height and confident handling even when you're packed full-time. Alignment Back Where It Belongs Lift changes geometry and this kit addresses it. It includes a rear panhard relocation bracket and spring packers to correct alignment and help your Jeep track straight after the install.
Started building out your Bronco with a bumper, winch, or rear storage? This OME kit adds up to 2" of lift and is tuned for medium front and rear loads to restore control, stance, and ride quality—on pavement or the trail.They smooth out the bumps, reduce sway, and give you back control on highways, washboards, or narrow forest roads. Fixes the Geometry, Too Trim packers and a panhard relocation bracket are included to help keep your suspension aligned after the lift. That means no guessing, no weird steering quirks, and a smoother ride right out of the garage.
Built your Bronco to carry gear and go the distance? This OME kit adds up to 2" of lift and is tuned for heavy front and rear loads—bringing back control, stance, and ride comfort when your rig is packed and the trail keeps going.It stays planted, rides smoother, and finally feels like the setup you built it to be. Specs: Ride Height & Load: Front Suspension: Lift: approximately 2" (3/4" on Sasquatch-equipped models) Load Rating: 110 lbs to 330 lbs Coil Spring Rate: 363/435 lbf/in Rear Suspension: Lift: approximately 2" Load Rating: 660 lbs constant load Coil Spring Rate: 336/403 lbf/in Included Components: 3199 Old Man Emu Front Coil Spring Set (1 pair) 3206 Old Man Emu Rear Coil Spring Set (1 pair) 90047 OME Front Nitrocharger Sport Strut (2) 90048 OME Rear Nitrocharger Sport Shock (2) FK109 Rear Panhard Relocation Bracket (1) FK110 Front Coil Spring Trim Packer (1) FK111 Rear Coil Spring Trim Packer (1) OMESTAB10 OME Front Sway Bar (1) Note: Maximum recommended tire size is 35" Professional alignment recommended after installation Upper control arm UCA0011 upgrade may be needed depending on tire size and alignment specifications
Running light but want a better ride and stance? This OME kit adds up to 2" of lift and is tuned for stock or lightly equipped Broncos. It improves comfort, control, and ground clearance without making the ride harsh or overbuilt.They reduce body roll, improve road feel, and help the suspension respond more naturally to terrain—on gravel, trails, or highway miles. Corrects Geometry After the Lift Trim packers and a rear panhard relocation bracket are included to help keep things aligned and smooth after you install the lift.
Running a bumper up front and gear in the back? This BP-51 kit adds 2" of lift and is tuned for a 330 lb constant rear load. Matched springs, shocks, and hardware give your 4-door Jeep JK better control, stance, and comfort on and off the trail.You get consistent ride height and confident handling even when you're packed full-time. Alignment Back Where It Belongs Lift changes geometry and this kit addresses it. It includes a rear panhard relocation bracket and spring packers to correct alignment and help your Jeep track straight after the install.
Built your Bronco to carry gear and go the distance? This OME kit adds up to 2" of lift and is tuned for heavy front and rear loads—bringing back control, stance, and ride comfort when your rig is packed and the trail keeps going.It stays planted, rides smoother, and finally feels like the setup you built it to be. Specs: Ride Height & Load: Front Suspension: Lift: approximately 2" Load Rating: 220 lbs to 330 lbs Coil Spring Rate: 393/472 lbf/in Rear Suspension: Lift: approximately 2" Load Rating: 660 lbs constant load Coil Spring Rate: 336/403 lbf/in Included Components: 3200 Old Man Emu Front Coil Spring Set (1 pair) 3206 Old Man Emu Rear Coil Spring Set (1 pair) 90047 OME Front Nitrocharger Sport Strut (2) 90048 OME Rear Nitrocharger Sport Shock (2) FK109 Rear Panhard Relocation Bracket (1) FK110 Front Coil Spring Trim Packer (1) FK111 Rear Coil Spring Trim Packer (1) OMESTAB10 OME Front Sway Bar (1) Note: Maximum recommended tire size is 35" Professional alignment recommended after installation Upper control arm UCA0011 upgrade may be needed depending on tire size and alignment specifications
Filters
