Adapter lugs let you attach your JT's Strong Arm stabilizers to hydraulic jacks. Can be welded or bolted onto the round footpads of your landing gear.Features: Adapter lugs let you attach the feet of your hydraulic landing gear jacks to your JT's Strong Arm stabilizers Each lug allows for attachment of 1 stabilizer Weld-on or bolt-on installation Lugs attach to the round footpads on your landing gear 2 Lugs and mounting bolts included 1-Year warranty
Install a Fulton F2 jack onto your trailer's existing Fulton XP10 or XP15 jack mount. Simply bolt this adapter plate onto your welded-on mount. Sharkskin finish resists corrosion. 1/2" Pull pin hole.Simply remove your old jack from the XP mount and bolt on this adapter plate in its place with the included hardware. Installation To install the Fulton jackadapter kit, first you will need to use a 3/4" wrench to remove the locknut from your existing XP jack swivel assembly.
Adapter kit lets you attach your JT's Strong Arm stabilizers to electric landing gear jacks. Bolts onto the round footpads of your landing gear. ... Features: Adapter kit lets you attach the feet of your electric landing gear jacks to your Lippert Components JT's Strong Arm stabilizers Plates mount on either side of jack to allow for installation of swing bolts Bolt-on installation Includes 4 jack pad adapter plates 1-Year warranty
Your arm stalls mid-crank with a loaded tongue. Been there. This A-frame jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. You raise and lower smoothly without fighting the handle, and hitching doesn't drag on.Fold down the sidewind handle and use your drill with the included 3/4" socket to raise or lower the jack. If the drill isn't nearby, just flip the handle back up and crank it manually. 2,000 lbs of Lifting Capacity With a 2,000-lb maximum capacity and 14" of travel, this jack handles the tongue weight of loaded campers, utility trailers, and other towables.
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black powder coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 4 jacks Limited lifetime warranty
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 2 jacks Limited lifetime warranty
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 24". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 2 jacks Limited lifetime warranty
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb A-frame jack uses a drill adapter so the lift happens without the handle. The coupler lines up faster, and the SnapPad stays planted on soft ground.The finish holds up through repeated raising and lowering, so the jack stays functional instead of locking up when you need it. Specs Capacity and Lift: Maximum capacity: 2,000 lbs Lift: 14" Tube Diameters: Outer tube: 2-1/4" outer diameter Inner tube: 2" outer diameter Construction: Outer tube: steel with e-coat and glossy black powder coat Inner tube: steel with white zinc plating Foot plate: round, removable Operation: Handle: sidewind, fold-down for power drill access Drill adapter: 3/4" integrated nut and 3/4" socket included Included Accessories: Mounting hardware: (3) 3/8"-16 x 1" grade 5 hex bolts, (3) 3/8" flat washers, (3) 3/8"-16 grade 5 nylon lock nuts 3/4" socket for drill operation Warranty: Limited lifetime SnapPad Jack Stand Pad: Application: 6" round jack foot Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs Warranty: 2-Year Included Components: etrailer Manual Sidewind Trailer Jack with Drill Adapter - A-Frame - 14" Lift - 2K Replacement Pad for SnapPad Jack Stand Pad System - 6" Round Jack Foot
Designed to work with your etrailer scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. ... Features: Socket lets you use a power drill (not included) to speed up extension and retraction of scissor jacks Eliminates manual cranking Works up to 10 times faster than hand cranking Easy operation with a powered drill that uses 3/8" drill bits Zinc-plated steel is durable and corrosion resistant Non-slip shank Hex socket measures 3/4" Limited lifetime warranty
Cranking a trailer jack by hand gets old fast, especially in the heat, cold, or mud. This gearbox adapter lets you use your drill with compatible Dutton-Lainson hand-crank jacks, so you can raise and lower your trailer faster with less effort.Manual Backup Ready: Attach a handle anytime for standard hand operation. Built for 1,500 to 2,000 lbs Jacks: Designed for compatible Dutton-Lainson hand-crank models. Features to know about Convert to Drill-Assisted Operation This gearbox adapter upgrades select Dutton-Lainson hand-crank trailer jacks for drill-assisted use.
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 4 jacks Limited lifetime warranty
Need to replace a worn or damaged drive on your camper jacks? This hex drive gives you an exact-match fit for HappiJac systems, so you can keep lifting and lowering your camper smoothly without any extra hassle.Highlights Restore Camper Jack Operation: Hex drive replaces the original component on HappiJac camper screw jack systems. Lift and Lower your Camper: Replacement drive supports proper camper jack system function.
Designed to work with most scissor jacks, this unique T-slot drill attachment is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. ... Features: T-slot attachment lets you use a power drill (not included) to speed up extension and retraction of scissor jacks Eliminates manual cranking Works up to 10 times faster than hand cranking Easy operation with a powered drill that uses 3/8" drill bits Zinc-plated steel is durable and corrosion resistant Lifetime warranty
... Jacks sold separately.Highlights Single Jack Hose Kit: Connects one Atlas jack to your trailers hydraulic system All Parts Included: Comes with hoses and adapters for a complete setup Works With Existing Systems: Integrates with your pump or Stillwell's power unit Reliable Operation: High-quality components ensure smooth, consistent performance Made in the USA: Built with domestically sourced materials for long-term dependability Features to Know About Connect Your Jack With Confidence This kit includes everything you need to hook up a single Atlas hydraulic jack to your trailers hydraulic system.
... Jacks sold separately.Everything You Need for a Tandem Setup This kit includes all the high-pressure hoses and adapter fittings needed to connect two Atlas jacks in a tandem configuration. It ties into your trailers existing hydraulic pump and also works with Stillwell's power unit if you're building out a full system.
Designed to work with most scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. ... Features: Socket lets you use a power drill (not included) to speed up extension and retraction of scissor jacks Eliminates manual cranking Works up to 10 times faster than hand cranking Easy operation with a powered drill that uses 3/8" drill bits Zinc-plated steel is durable and corrosion resistant Non-slip shank Hex socket measures 3/4" 2-Piece construction Lifetime warranty
... Jacks sold separately.Highlights Tandem Hose Kit: Links two jacks to lift in sync from one hydraulic source Even, Controlled Lifting: Keeps both jacks moving together for balanced support Complete Setup in One Box: Includes all hoses and adapters for a quick install Built to Industry Standards: High-pressure components ensure reliable performance Made in the USA: Built with high-quality seals and domestically sourced steel Features to Know About Smooth, Synchronized Lifting Made Simple This kit links two Atlas Vaquero jacks to operate together from a single hydraulic system, giving you even, controlled lifting without the risk of one jack lagging behind.
Keep your existing Fulton F2 weld-on bracket when switching to a Dutton-Lainson marine tongue jack. This adapter bolts to the bracket without welding and accepts D-L jacks with a 1/2" swivel pin.Highlights Keep Your Weld-On Bracket: Lets you install a compatible Dutton-Lainson tongue jack on a trailer already equipped with a Fulton F2 weld-on mounting bracket. No Welding Required: Adapter plate bolts into place for a straightforward jack conversion.
Tired of cranking your jacks by hand? This drill adapter turns your drill into a 3/4" socket driver so you can speed through RV leveling with way less effort and get set up faster at your campsite.Highlights Speed Up RV Leveling: Drill adapter turns a standard drill into a 3/4" socket driver. Raise and Lower Jacks Faster: Time-saving design speeds up stabilizer jack operation.
Upgrade a heavy work or dump trailer from manual cranking with 10,000-lb lift capacity and 26" of lift. Single-acting jack extends hydraulically and retracts with compressed air. Requires an HPU - pump, hoses, and fittings sold separately.This version is built around a single-acting hydraulic setup. Hydraulic pressure extends the jack to raise your trailer, while compressed air in the jack retracts it when it's time to get the jack back out of the way. The NeXgen adapter gives you a way to add air and maintain the pressure needed for retraction.
Upgrade your power-up/gravity-down dump trailer from manual cranking with a 10,000-lb Atlas IV jack. Hydraulic pressure extends the jack, compressed air retracts it, and the 48" kit includes the valve, hoses, and fittings.Built for Power-Up/Gravity-Down Systems: Shares the hydraulic pump already powering your dump bed. Compressed-Air Retraction: Hydraulic pressure extends the jack, while the NeXgen adapter lets you add air to maintain the pressure needed to retract it. Connection Kit Included: Selector valve, two hoses, and fittings tie the jack into your trailer's hydraulic system.
Upgrade your power-up/gravity-down dump trailer from manual cranking with a 10,000-lb Atlas IV jack. Hydraulic pressure extends the jack, compressed air retracts it, and the 39" kit includes the valve, hoses, and fittings.Built for Power-Up/Gravity-Down Systems: Shares the hydraulic pump already powering your dump bed. Compressed-Air Retraction: Hydraulic pressure extends the jack, while the NeXgen adapter lets you maintain the air pressure needed to retract it. Connection Kit Included: Selector valve, two hoses, and fittings tie the jack into your trailer's hydraulic system.
Upgrade your power-up/gravity-down dump trailer from manual cranking with a 10,000-lb Atlas IV jack. Hydraulic pressure extends the jack, compressed air retracts it, and the 60" kit includes the valve, hoses, and fittings.Built for Power-Up/Gravity-Down Systems: Shares the hydraulic pump already powering your dump bed. Compressed-Air Retraction: Hydraulic pressure extends the jack, while the NeXgen adapter lets you add air to maintain the pressure needed to retract it. Connection Kit Included: Selector valve, two hoses, and fittings tie the jack into your trailer's hydraulic system.
Tired of cranking your stabilizers by hand? This single leg stabilizer kit lets you use a power drill to get set up faster, giving you a quick and easy way to steady your RV so you can spend more time relaxing at your campsite.Stabilize 1 Side of the RV: Single leg kit supports RV stabilization during setup and use. Use the Included Drill Adapter: 3/4" drill adapter works with a non-impact drill for quick operation. Set the Leg for Better Support: Adjustable leg lets you set the proper height and angle.
Filters
