This custom mounting kit lets you install your 50" curved Luminix LED light bar on the roof of your vehicle. Black powder coated steel brackets are strong, durable, and corrosion resistant. Mounting hardware and 16-gauge power wire included.Features: Custom mounting kit lets you install your light bar on the roof of your vehicle Fits Putco Luminix 50" long, curved off-road LED light bar (P10055 - sold separately) Black powder coated steel mounting brackets are corrosion resistant Mounting hardware, wiring, and connectors included 8' Long 16-gauge wire provides extra length to run power to the roof Made in the USA 1-Year warranty
If you off-road but space is at a premium, the Tallboy is a compact bottle jack that can still create some serious lift. The oversized base plate gives you a solid foundation on the trail. And it only takes up about one cubic foot when stored.You can take it with you on every trip and know you're prepared for flats and other repairs. Specs Capacity and Lift: Weight capacity: 6 tons Lift: 8-1/2" to 37-3/4" Dimensions: Base plate: 8" long x 7" wide x 5/16" thick Carry bag: 12-5/8" long x 9-7/16" wide x 10-1/4" tall Warranty: 1-year limited Note: This jack is designed to lift and stabilize 6 tons and should not be used to lift over that weight.
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.Features: Proportional braking - Smooth, safe, and good for your brakes long-term 1-Step installation - Plugs into your 7-way and you're done Bluetooth - Control your settings from your smartphone using the OneControl app Great for a fleet - Swaps easily between multiple tow vehicles and trailers Simple troubleshooting - Diagnostic LEDs are displayed on the main unit Safe for your car - Built-in reverse polarity and short circuit protection Weather-resistant - Sealed against moisture Specs: Application: trailers with 1 to 2 axles (4 brake assemblies) Compatible with electric trailer brakes Plug-in unit dimensions: Length: 6-5/8" Vehicle-side width: 1-5/8" Trailer-side width: 2-7/8" Smart device OS requirements: Apple: 5.0 and newer Android: 4.3 and newer Limited lifetime warranty Pair with other OneControl systems for convenient control of your trailer in one app!
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.
Get a smoother towing experience by upgrading to these rubber equalizers that absorb road shock and reduce chucking. Up to 3" of suspension travel helps to compensate for different types of terrain. Fits trailers with double-eye leaf springs.Features: Rubber equalizers replace your trailer's factory steel equalizers to upgrade your setup Delivers a smoother, more comfortable ride Reduces stress on your trailer frame Protects trailer contents from getting damaged while towing Up to 3" of up-and-down travel gives your trailer the ability to compensate for different types of terrain Rubber inserts absorb and dampen road shock and vibration Limit back-and-forth chucking Require less maintenance than suspension upgrades that use air bags Easy, bolt-on installation (mounting hardware sold separately) Made in the USA Specs: Application: tandem-axle trailers with 35" wheelbase and double-eye leaf springs To determine your wheelbase, measure the distance between the center of your front wheel to the center of your rear wheel Bolt hole diameter: 9/16" Dimensions: Distance between outer shackle bolt holes (center on center): 8" Distance between hanger bolt hole and outer shackle bolt hole (center on center): 4" Height from shackle bolt hole to hanger bolt hole: 3-1/2" Axle capacity: up to 8,000 lbs Quantity: 2 equalizers 2-Year warranty (or 45,000 miles) Rubber Equalizers Absorb Road Shock and Reduce Chucking Hauling a trailer that's still equipped with standard steel equalizers is bound to produce a less-than-ideal towing experience.
This kit includes a junction box so you can quickly and easily connect the wires from the included trailer connector to your trailer's wiring.Features: Kit allows you to upgrade from a 4-way, 5-way, or 6-way connector to a 7-way connector Pre-wired, 7-way, blade-style, trailer-end connector lets you connect your trailer to your vehicle Flexible cable allows for easy positioning Weatherproof, heavy-duty plastic junction box protects wires and terminals from the elements Wire functions: Black: 12 volt power Yellow: auxiliary or reverse signal Red: left brake and turn signal Green: running lights Brown: right brake and turn signal Blue: trailer brakes Ring terminals included Specs: Overall box dimensions: 8-1/8" long x 3-3/8" wide x 2-5/16" tall Distance between mounting holes (on center): 7-3/8" Lid dimensions: 6-5/8" long x 3-3/8" wide Cord dimensions (not including junction box): 5'-5" long x 5/8" diameter Overall length including junction box: 6'
We've dealt with the rattles, the clanks, and the frustration of constant swaps, so we built a smarter solution. This anti-rattle collar installs fast, stays secure, and works with all your hitch-mounted gear, so you can focus on the road ahead.Specs Compatibility Fits standard 2" hitch receivers Receiver must have a collar around opening to work Fits collars up to 7/8" thick and 3-1/4" wide Material & Finish Steel with a matte black powder coat and e-coat Weight Capacity 5,000 lbs Warranty Limited lifetime Notes: This will not work when using a weight distribution system.
Small, light, and precise, this portable unit gets you smooth braking with basically no installation. Plugs directly into 12V outlet. Easy to swap between multiple cars. Control and monitor the system remotely from your motorhome with LCD display.Features: Applies towed vehicle's brakes proportionally for smooth braking Measures motorhome's braking and activates car's brakes with same intensity Lets you adjust force and sensitivity for smooth braking Swaps easily between multiple towed vehicles Requires second vehicle kit (BRK2505 - sold separately) for each alternate car Adjusts to fit almost any car Sits evenly on any floorboard with adjustable feet Clamps easily around almost any brake pedal Braces firmly against the seat with seat pad that you can raise or lower Installs simply, with no splicing or hardwiring Plugs directly into 12V outlet in towed car Removes and stores easily Lightweight and compact Convenient handle - carry with one hand Allows you to control and monitor braking with handy LCD screen mounted on RV dashboard Lets you activate towed car's brakes in emergency or to correct sway Alerts you if the towed vehicle becomes detached from your motorhome Warns you if there's too much pressure to activate the brakes properly Plugs into 12V accessory outlet Stops the car if a breakaway occurs, even if your car's battery is dead Able to activate for up to 30 minutes after loss of power Made in the USA Specs: Compatible with hybrids and other cars with continuous-power-assist brakes Overall dimensions: 8" long x 7-1/2" wide x 11-1/2" tall Weight: 6 lbs 2-Year warranty Do I Need a Braking System for Flat Towing? A braking system is a must when towing a vehicle behind your motorhome.
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.) To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.) To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. Fits 13" to 15" wheels.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 3,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
Upgrade your trailer's suspension system with these rubber equalizers for a smoother, more comfortable ride. The rubber insert offers up to 3" of suspension travel for greater shock absorption.Features: Rubber equalizers replace your stock equalizers for a smoother ride Rubber insert dampens road shock Provides up to 3" of suspension travel Reduces back-and-forth chucking Requires less maintenance than equalizers with air bags Mounting hardware sold separately Made in the USA Specs: Application: tandem-axle trailer with 33" wheelbase and double-eye leaf springs Axle capacity: 8,000 lbs Dimensions: Distance between outer shackle bolt holes (center on center): 6-1/2" Distance between hanger bolt hole and outer shackle bolt hole (center on center): 3-1/4" Height from shackle bolt hole to hanger bolt hole: 3-1/4" Quantity: 2 equalizers 2-Year warranty (or 45,000 miles) Measuring to Determine Fit How to Measure to Determine Fit
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent damage from electrical feedback. Includes 7-way to 6-way coiled adapter cord and 6-way socket.Features: Complete wiring kit connects your RV's tail, brake, and turn signal lights to your towed car Diodes prevent feedback that can damage your vehicle's electrical components Protected from corrosion by powder-coated aluminum casings 7-Wire to 6-wire adapter cord runs power from RV to towed car Coiled to prevent dragging and tangling Resistant to wear and tear with durable vinyl casing 6-Way socket hardwires to towed car and mounts with included bracket Kit includes: 4 Hy-Power diodes 4-Wire harness 7-Way to 6-way coiled adapter cord 6-Way socket with mounting bracket 1 Butt connector, 1 ring terminal, split loom, and zip ties Made in the USA Specs: Diode max amperage: 85 amps Diode max voltage: 24 volts Coiled cord Max length: 8' Compressed length: 15" Wiring harness length: 27' Notes: A brake light relay (RM-88400 - sold separately) may be required if used with a flat tow brake system.
Extend the life of your trailer's suspension with this heavy-duty hardware kit. 1/2" Thick steel shackle straps will outlast the standard straps on your double-eye leaf springs. Wet bolts and bronze bushings help keep your setup lubricated.Features: Leaf spring mounting hardware upgrades your leaf spring suspension system Thick shackle straps, wet bolts, and bronze bushings are long-lasting and minimize intensive trailer maintenance Heavy-duty shackle straps replace your factory shackle straps 1/2" Thick shackles are more durable and twice as thick as most stock shackles Wet bolts with built-in grease fittings are long-lasting and ease maintenance Bronze bushings are more durable and last longer than the plastic bushings found on most factory suspensions Work with wet bolts to ensure a well-lubricated setup Quick, simple installation Shackle straps replace your trailer's factory straps Included bolts, nuts, and bushings replace your existing suspension hardware Includes: 8 Shackle straps 8 Wet bolts (for attaching the springs to your equalizers) 6 Wet bolts (for suspending your equalizers and springs from the hangers) 14 Bronze bushings (for spring eyes and equalizer bolt holes) 14 Locknuts Made in the USA Specs: Application: tandem-axle trailers with double-eye leaf springs Shackle strap length (from center of hole to center of hole): 2-1/4" Bolt hole diameter: 9/16" Wet bolt dimensions: 9/16" Diameter x 3-3/8" usable length 9/16" Diameter x 2-15/16" usable length Bushing dimensions: Outer diameter: 11/16" Inner diameter: 9/16" Length: 1-3/4" 1-Year limited warranty
This bearing and race kit has everything to replace the bearings on 1 hub of your Lippert, Dexter, or AL-KO 3,500-lb axle. Includes inner and outer bearings and races, seal, cotter pin, and EZ lube spindle washer.
The automotive-grade pads on these brakes offer lasting effectivenes. 12" x 2" Assemblies have rust-resistant, e-coated backing plates. Fits 14-1/2" to 16-1/2" wheels.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 4,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 2,000 lbs Axle capacity: 4,000 lbs Length from center of spring eye to center of spring eye (unloaded): 26" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 4 Additional dimensions: see table Part Number A B C D e22YR 13" 14" 26" 4-1/4" Double-Eye Leaf Spring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension.
Extend the life of your trailer's suspension with this heavy-duty hardware kit. 1/2" Thick steel shackle straps will outlast the standard straps on your double-eye leaf springs. Wet bolts and bronze bushings help keep your setup lubricated.Features: Leaf spring mounting hardware upgrades your leaf spring suspension system Thick shackle straps, wet bolts, and bronze bushings are long-lasting and minimize intensive trailer maintenance Heavy-duty shackle straps replace your factory shackle straps 1/2" Thick shackles are more durable and twice as thick as most stock shackles Wet bolts with built-in grease fittings are long-lasting and ease maintenance Bronze bushings are more durable and last longer than the plastic bushings found on most factory suspensions Work with wet bolts to ensure a well-lubricated setup Quick, simple installation Shackle straps replace your trailer's factory straps Included bolts, nuts, and bushings replace your existing suspension hardware Includes: 8 Shackle straps 8 Wet bolts (for attaching the springs to your equalizers) 6 Wet bolts (for suspending your equalizers and springs from the hangers) 14 Bronze bushings (for spring eyes and equalizer bolt holes) 14 Locknuts Made in the USA Specs: Application: tandem-axle trailers with double-eye leaf springs Shackle strap length (from center of hole to center of hole): 3-1/8" Bolt hole diameter: 9/16" Wet bolt dimensions: 9/16" Diameter x 3-3/8" long 9/16" Diameter x 2-7/8" long Bushing dimensions: Outer diameter: 11/16" Inner diameter: 9/16" Length: 1-3/4" 1-Year limited warranty
This aluminum tow bar is the absolutely snazziest tow bar you can get. Sleek, lightweight, with built-in LEDs for increased visibility and safe driving at night. The electrical cord comes installed in the cable guide, keeping your setup organized.Features: Safely bring your heavy vehicle along behind your RV Built-in LED light strips increase visibility and safety by alerting other drivers that you're towing a vehicle Easy hookup with arms that smoothly extend and pivot to reach the base plate Stainless steel construction lets the inner arms slide in and out Self-aligning arms automatically lock into towing position when you pull forward Extra-long arms help you make tight turns Quick disconnect, even on rough terrain, with non-binding levers Cable guides keep included power cord from getting damaged or tangled Included 6-way plug installs on the front of your vehicle Coiled safety cables won't drag as you tow Vinyl-coated to resist corrosion Spring-loaded latches prevent the hooks from disconnecting Can be threaded through the cable guides to keep them organized Engineered to be super tough FEA testing guarantees a strong finished product Self-lubricated nylon bushings eliminate friction between the inner and outer arms for a longer-lasting, better-functioning system Lightweight, aircraft-grade aluminum body is durable and rustproof Black matte powder coat finish protects against scratches and dings Easy storage on the back of your RV Push arms up so the holding latch snaps into place and then fold them left or right Made in the USA Specs: Fits: Roadmaster base plates Crossbar-Style (EZ, EZ2, EZ4, Classic, and XL) base plates require the quick-disconnect assembly (910021-00 - sold separately) Can be used with base plates from other manufacturers with adapter (sold separately) Application: 2" x 2" trailer hitch receivers Arm length (from center of hitch pin hole to center of base pin hole when lined up with arm straight): Extended: 52" Retracted: 40-1/2" Weight capacity: 8,000 lbs Weight: 50 lbs Limited lifetime warranty Fits etrailer, Blue Ox, and Demco Base Plates with Adapter Base Plate Adapter etrailer Classic: e98984 Invisible: e98984 Blue Ox RM-031-5 Demco Tabless: DM9523062 Classic: RM-034-5 or DM9523062 Built-in LED Light Strips This is the coolest feature you didn't know you needed.
Keep your RV's interior off-limits with a new entry door lock. It replaces your original Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door lock. The lock can be keyed alike to match other Global Link locks.
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5.2K and 6K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, cap and nuts included.On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.) To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first.
Suspension kit includes equalizers and hardware for attaching 4 leaf springs to the hangers on your trailer's frame. Works with 33" axle spacing. Built-in grease zerks for easy lubrication. Heavy-duty shackle straps ensure strength.Features: Suspension kit lets you attach 4 leaf springs (sold separately) to your trailer frame Works with 1-3/4" wide double-eye springs Hangers sold separately Equalizers transfer load and impacts from one axle to another by permitting movement between the axles Springs attach to ends of equalizers with included hardware Wet bolts secure equalizers and springs to the hangers on your trailer Grease zerks allow for fast, easy lubrication to keep moving parts functioning at their best Heavy-duty shackle link assemblies with bolts secure springs to equalizers 1/2" thick links are thicker than standard straps for greater durability Bushings fit into spring eyes to help maintain a well-functioning system and ensure proper sizing for suspension bolts Bronze construction resists corrosion Made in the USA Specs: Application: tandem-axle trailers with 1-3/4" double-eye springs Axle spacing: 33" Kit includes: 2 Equalizers Distance between outer shackle bolt holes (center on center): 5-3/4" Distance between hanger bolt hole and shackle bolt hole (center on center): 2-7/8" Height of side bolt hole to hanger bolt hole: 2" Bolt hole diameter: 9/16" (4) 2-1/4" Shackle link assemblies with 9/16" x 3-3/8" long wet bolts (4) 2-1/4" Long shackle links (4) 9/16" x 2-7/8" Long wet shoulder bolts (2) 9/16" x 2-7/8" Long shoulder bolts (8) 9/16" x 1-3/4" Bushings (14) 7/16"-20 Flange nuts 5-Year limited warranty
Filters
