Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The shape of the slipper end of a leaf spring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leaf spring's slipper end before purchasing a replacement spring.
Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for an 8,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The shape of the slipper end of a leaf spring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leaf spring's slipper end before purchasing a replacement spring.
... Upgrade your suspension with this long-lasting, supremely rust-resistant slipper leaf spring.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushing included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Eye of spring attaches to hanger mounted on trailer frame Slipper end slides into hanger or equalizer Dacromet finish provides superior rust resistance Salt spray rating 700 hours at 5% salinity Specs: Quantity: 1 leaf spring Leaf springs should always be replaced in pairs to ensure proper axle alignment Spring capacity: 2,150 lbs Axle capacity: 4,300 lbs Length from center of spring eye to end of spring: 26-1/4" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 1" Leaf thickness: 3/8" Number of leaves: 4 Additional dimensions: see table Limited lifetime warranty Part Number A B C D E F e33SR 13-1/8" 26-1/2" 26-1/4" 13-3/4" 14-1/8" 3-1/2" If you're replacing a busted or rusted-out spring on your trailer - or if you've decided to upgrade to dacromet to avoid rusted-out springs down the line - the first thing you'll need to do is measure your existing leaf springs.
... Upgrade your suspension with this long-lasting, supremely rust-resistant slipper leaf spring.Compare that to some other dacromet coatings out there that are rated at just 300 hours - or zinc coatings that don't last for even that long - and you can be sure these springs will last. SlipperSpring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension.
Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 4,300-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The slipper end of the spring will slide into the rear hanger. If you have a tandem- or triple-axle trailer, the slipper end will slide into the equalizer that connects multiple springs.
USA-made slipper leaf spring acts as part of your trailer's suspension system providing an attachment point for a 8,000-lb axle. Spring flexes to resist shock while ensuring a smooth ride. ... The shape of the slipper end of a leaf spring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leaf spring's slipper end before purchasing a replacement spring.
This 5-leaf slipperspring is 26-1/2" long x 2" wide. It is designed for use on trailers with 7,000-lb axles.Leaf springs are an integral part of your trailer suspension system. The slipperspring is suspended at one end by a hanger that attaches to the eye.
Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for an 8,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride.The slipper end of the spring will slide into the rear hanger. If you have a tandem- or triple-axle trailer, the slipper end will slide into the equalizer that connects multiple springs.
USA-made slipper leaf spring acts as part of your trailer's suspension system providing an attachment point for a 4,700-lb axle. Spring flexes to resist shock while ensuring a smooth ride. ... The slipper end of the spring will slide into the rear hanger. If you have a tandem- or triple-axle trailer, the slipper end will slide into the equalizer that connects multiple springs.
Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 4,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The shape of the slipper end of a leaf spring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leaf spring's slipper end before purchasing a replacement spring.
Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,500 lbs axle. Spring flexes to resist shock and also ensures a smooth ride. ... The slipper end of the spring will slide into the rear hanger. If you have a tandem- or triple-axle trailer, the slipper end will slide into the equalizer that connects multiple springs.
USA-made slipper leaf spring acts as part of your trailer's suspension system providing an attachment point for a 4,300-lb axle. Spring flexes to resist shock while ensuring a smooth ride. ... The slipper end of the spring will slide into the rear hanger. If you have a tandem- or triple-axle trailer, the slipper end will slide into the equalizer that connects multiple springs.
Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 10,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... The slipper end of the spring will slide into the rear hanger. If you have a tandem- or triple-axle trailer, the slipper end will slide into the equalizer that connects multiple springs.
Kit includes 3-3/4" tall front hangers, 5-1/6" tall rear hangers and hardware for mounting 2" springs to your 2,000-lb to 8,000-lb, single-axle trailer frame. Components for mounting axle to springs sold separately.Features: Attaches 2 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 4-3/4" or 5" clearance between trailer frame and axle, depending on axle size Includes: (2) 3-3/4" Tall front hangers (2) 5-1/6" Tall rear hangers (4) 3-1/2" Long x 9/16" diameter shackle bolts (4) 9/16" Diameter locknuts Designed for use on trailers with single, 2,000-lb to 8,000-lb axles Does not include components for mounting axle to springs Leaf Springs A - Distance Between Hangers B - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-230275 (803T3) SP-232275 (1203T3) SP-285275 (1403T3) 25" 4-3/4" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-160275 (E5226) 26" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-161275 (E5115) 28" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle) Note: The above table provides an indication of where the included hangers can be mounted on your trailer.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf springSpring capacity: 3,000 lbs Axle capacity: 6,000 lbs Length from center of spring eye to center of spring eye (unloaded): 26" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 6 Additional dimensions: see table Part Number A B C D e94SR 13" 14" 26" 4-1/4" Double-Eye Leaf Spring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension.
9/16" Diameter spring-retainer bolt is used to mount slipperspring inside front hanger. Includes locknut.Features: Suspension bolt attaches leaf spring to front hanger Included locknut secures in place on bolt Specs: Diameter: 9/16" Length: 3-1/2"
Keep your Dexter 10K slipper suspension tight with this 3/4" x 4-1/2" spring eye bolt. Sized for rubber bushed 10K general duty springs, it installs with the 6-113 locknut and HAP-258-03 equalizer kit.Features: Replaces a worn or damaged spring eye bolt on your Dexter 10K general duty slipperspring suspension 3/4" Diameter bolt is sized for Dexter springs with rubber bushings to keep the spring eye tight and supported Measures 4-1/2 inches long so it fits standard Dexter hangers and equalizers without excess bolt length 3/4"-10 Threaded end works with Dexter 6-113 locknut (sold separately) for a secure, long lasting clamp Compatible with HAP-258-03 Dexter tandem axle equalizer kit (sold separately) for 2-1/2 inch slippersprings
1" Diameter spring-retainer bolt attaches slipperspring to front hanger or equalizer on trailers with 10,000-lb, 12,000-lb or 15,000-lb Dexter axles. ... Features: Suspension bolt attaches leaf spring to front hanger or equalizer Included locknut secures in place on bolt Specs: Diameter: 1" Threads per inch: 8 Length: 5-1/2" Grade: 5
1-1/8" Diameter spring-retainer bolt attaches slipperspring to front hanger or equalizer. Locknut sold separately.Features: Suspension bolt attaches leaf spring to front hanger or equalizer Works with 10,000-lb, 12,000-lb, or 15,000-lb Dexter axle equalizers Locknut (6-72 - sold separately) secures in place on bolt Specs: Diameter: 1-1/8" Threads per inch: 7 Length: 6" Grade: 5
5/8" Diameter spring-retainer bolt attaches slipperspring to front hanger or equalizer. Includes locknut.Features: Suspension bolt attaches leaf spring to front hanger or equalizer Works with 6-Leaf SlipperSpring for 9,000-lb Trailer Axles (72-10-2) Included locknut secures in place on bolt Specs: Diameter: 5/8" Threads per inch: 11 Length: 4" Grade: 5
5/16" Diameter spring-retainer bolt is used to mount slipperspring inside rear hanger. Includes locknut.Features: Suspension bolt attaches leaf spring to rear hanger Slipperspring slides into hanger and rests on bolt Included locknut secures in place on bolt Specs: Diameter: 5/16" Threads per inch: 18 Length: 3-1/4" Grade: 2
1" Diameter spring-retainer bolt attaches slipperspring to front hanger or equalizer on trailers with 10,000-lb, 12,000-lb or 15,000-lb Dexter axles. ... Features: Suspension bolt attaches leaf spring to front hanger or equalizer Locknut (6-112; sold separately) secures in place on bolt Specs: Diameter: 1" Threads per inch: 8 Length: 5-1/2" Grade: 5
5/16" Diameter spring-retainer bolt is used to mount slipperspring inside rear hanger. Locknut sold separately.Features: Suspension bolt attaches leaf spring to rear hanger Slipperspring slides into hanger and rests on bolt Locknut (6-11; sold separately) secures in place on bolt Specs: Diameter: 5/16" Threads per inch: 18 Length: 3-1/4" Grade: 2
5/8" Diameter spring-retainer bolt attaches slipperspring to front hanger or equalizer. Locknut sold separately.Features: Suspension bolt attaches leaf spring to front hanger or equalizer Works with 6-Leaf SlipperSpring for 9,000-lb Trailer Axles (72-10-2) Locknut (6-38; sold separately) secures in place on bolt Specs: Diameter: 5/8" Threads per inch: 11 Length: 4" Grade: 5
Filters
