Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Jonathan thanks for all the information! I've got one bike rack that is going to meet your needs it's the Kuat NV 2.0 Base 2-Bike Platform Rack item #BA12B. This wheel mount bike rack has a 60 lbs per bike capacity. It's designed to…
view full answer...Replacement Manifold for Air Lift WirelessAIR Compressor System for Air Helper Springs AL26558 is a replacement for the WirelessAIR model compressor systems. Your WirelessONE Gen 1 system is no longer manufactured so the only way to find a…
view full answer...A 205/75-15 tire is what I'd recommend. The tire would be 1 inch taller in diameter which would raise the ride height by 1/2 inch, and the tire would be about the same width as your existing tire, which is 8 inches. . If a Load Range D tire with…
view full answer...I think the best way to test the battery charger on your breakaway kit is to apply 12V power to the wire that connects to the 12V power wire on your trailer and then test the other wire on the module to see if there is power coming through. If power…
view full answer...Hello Vince, thanks for reaching out. The part number 414849 comes back as a Parker brand hydraulic pump motor. Lippert actually makes a direct replacement for this, and for that you will need the following: - Replacement Hydraulic Pump Motor for…
view full answer...It's pretty simple. A 4-bolt rail uses four 5/8 inch bolts ran through the floor of the truck bed into the frame brackets. The bolts run down through the center of the raised part of the rail, as shown in the photo I provided. A 10-bolt rail uses…
view full answer...Yes, the EZ Gate Tailgate LIft Assist part #3375201000 will work on your bi-fold tailgate. If you check out the attached picture you can see it installed on a similar tailgate as what you have.
view full answer...Since you are limiting your trailer to 10000lbs, and the average tongue weight is 10-15% of the trailer weight, you are looking at 1000-1500lbs tongue weight. With that said it is a good idea to use a jack with a larger capacity as it will be able to…
view full answer...We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…
view full answer...The only difference between the base plates for your 2021 Jeep Wrangler Unlimited is that one, the Blue Ox, has mounting tabs for a connector plug, while the Curt does not: - Connector Plug Mounting Tabs: Blue Ox Base Plate Kit - Removable Arms…
view full answer...Yes we have just the thing. I recommend the Roadmaster diode kit #RM-15267. This will come with everything you need to wire to the vehicles tail lights, and to connect to the motorhome. You will mount a 6 pin plug on the front of the truck, and use…
view full answer...The UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing #L68149 and an outer bearing #L44649. As this is being used on a boat trailer, I highly suggest going with the etrailer.com…
view full answer...