Bulldog Winch Accessories and Parts - BDW20286 12-Volt, 20-amp powersocket with cover and 3 mounting brackets Flush mount, under dash, and dash top tent bracket Watertight cap with tether Large contact surfaces for good connection For automotive or marine use Use in-cab or outdoors
Add a 12V Auto power port where you need it without splicing wires or leaving loose leads exposed. This OptiMate panel-mount socket creates a sealed, fused, vibration-resistant charging point for trucks, trailers, RVs, and equipment.Keeps The Port Covered When Not In Use: Sealing cap helps protect the socket. Features to know about Create a Permanent 12V Access Point Instead of accessing the battery directly every time you need power, this OptiMate O-46 panel-mount socket lets you install a dedicated 12V connection point on your truck, trailer, RV, or other equipment.
Add a tidy 12Vpower port where you need it without splicing wires or guessing at connections. This OptiMate panel mount kit gives you a sealed, fused setup ready for trucks, trailers, and other 12V equipment.Once installed, you have a clean, consistent place to plug in a charger, solar panel, or 12V accessory. One Setup For Charging And Light-Duty Power The included O-46 socket and O-22 SAE to auto plug cable let the port both receive and deliver power.
... Two USB ports let you charge your phone, tablet, or other devices simultaneously. 12Vsocket lets you power your tire inflator or other accessory.Features: Charging station installs in your RV so you can charge devices and accessories 2 USB ports let you charge your phone, tablet, and other devices (1) 12Vsocket lets you charge or power your coffee maker, fan, car vac, or other 12V appliance Rubber cap protects against dust and debris when not in use Unit hardwires to 12-volt power source 12Vsocket connects with spade terminals USB outlet splices in with 2-wire pigtail (red = power; black = ground) Station mounts vertically or horizontally with included mounting hardware Snap-on wall plate provides a finished look Plastic construction is durable and long-lasting Black color Specs: USB amperage: 2.1 amps at 5V 12V DC socket amperage: 10 amps (if using 18-gauge wire) 20 amps (if using 14-gauge wire) Overall dimensions: 3-3/4" tall x 5" wide x 2" deep Required cutout in RV: 2-1/2" tall x 3-1/8" wide x 1-1/2" deep
Replace the broken 12Vpower outlet or cigarette lighter port in your vehicle, boat, or RV so you can power your fan or other devices while you're traveling. ... Features: 12Vpower outlet replaces a damaged 12V port in your vehicle, boat, or RV Power your tire inflator, fan, car vac, or other 12V appliance Rubber cap protects against dust and debris when not in use Hardwires to 12-volt power source with built-in spade terminals Metal construction is built to last Specs: Amperage: 10 amps (if using 18-gauge wire) 20 amps (if using 14-gauge wire) Outside diameter: 1" Required cutout : 7/8" diameter
Charging station lets you add or upgrade an outlet to charge multiple USB and 12V accessories at the same time. Includes 2 USB ports and (1) 12Vsocket. Mounts vertically or horizontally - hardware not included. Hardwires to 12Vpower source.Features: Charging station lets you add or upgrade an outlet to charge multiple USB and 12V accessories at once 2 USB ports charge phones, tablets, GPS units, and other devices 12-Volt socket charges a tire inflator, vacuum, coffee maker, or other accessory Surface mounts in horizontal or vertical orientation - hardware not included Snap-on wall plate provides a flush, finished look Hardwires to 12 volt power source 12Vsocket wires with spade terminals USB outlet wires with 2-wire pigtail Durable metal construction with black finish RoHs compliant Specs: Overall dimensions: 5" long x 3-3/4" tall x 2-1/2" deep Distance between mounting holes (center on center): Horizontal: 1-9/16" Vertical: 3" Inputs: (2) 2.1 amp USB ports 12 Volt DC socket 1-Year warranty
This LED light bar plugs right into your 12V outlet and needs no hardwiring, while the transmitter plugs into your RV's 7-way socket. Uses a suction cup to attach to your car's back window.Features: Displays tail, brake, and turn signals on your towed car so you can tow safely and legally Receives tow vehicle's signals via wireless transmitter Avoids risk of electrical damage to your car Requires no hardwiring or splicing Light bar plugs into 12-volt outlet in your car Transmitter plugs into RV's 7-way Mounts to your vehicle's rear window with a strong suction cup Includes light bar, transmitter and receiver kit, and mounting kit Made in the USA Specs: Universal fit for all vehicles Requires 12-volt accessory outlet Cord length: 11-1/2' Light bar length: 17" Note: If you have to disconnect your vehicle's battery in order to flat tow, use kit DM83FR (sold separately) to get power to your 12-volt outlet.
Need a reliable way to power or charge through a standard 12Vsocket? This SAE to Auto Plug adapter gives you a solid connection without loose fits or flickering power.Highlights Get Reliable Power From Your 12VSocket: Plug design helps stay seated without cutting out. Works With Standard Auto Ports: Fits 21 mm to 22 mm (13/16" to 7/8") 12Vsockets.
Add or replace a 12Vpower outlet inside your RV so you can power and charge your coffee maker, fan, or other small appliance while you're on the road. ... Features: 12Vpower outlet lets you charge or power your 12V accessories while you're on the road or camping Power your coffee maker, fan, car vac, or other 12V appliance Hardwires to 12-volt power source with built-in spade terminals Simple, clean mounting Position included nut on interior of wall or dash and thread outlet into it to secure in place Add a mounting plate (37215155 or 37215165 - sold separately) for a finished look Plastic construction is durable and long-lasting Specs: Amperage: 10 amps (if using 18-gauge wire) 20 amps (if using 14-gauge wire) Outside diameter: 1-7/16" Required cutout in RV: 1-1/8" diameter
Add or replace a 12-volt powersocket on your RV or boat to charge your electrical accessories. Waterproof cap ensures a complete seal when not in use. Easy installation with included quick nut.Features: Add or replace a 12-volt powersocket to charge your electrical accessories Perfect for RVs, boats, and off-road vehicles Waterproof cap protects against water damage Easy installation with included quick nut Spade terminals hardwire to 12V DC power source RoHs compliant Specs: Overall dimensions: 1-1/2" deep x 2-3/8" wide x 1-3/4" tall Distance between mounting holes (center to center): 1-7/8" Amperage: 15 amps Voltage: 12V/24V 5-Year warranty
You hook up the trailer and find the wiring connection has seen better days. This 12V replacement harness restores the link between a compatible 7-way round socket and 5-pin Delphi connector, while the coiled cord helps keep wiring from dragging.Support Standard 12V Electrical Systems: 12V configuration works with trailer lighting and electrical circuits. Features to know about Restore a Failed Trailer Connection When trailer lights stop responding and the connector is the weak link, replacing the connection is often the fastest path back to service.
Flat tow brake systems stop working right when power drops. This direct-wire 12V outlet connects to your towed vehicles battery so your braking system stays powered and ready every time you tow.Specs Electrical Voltage: 12V Fuse rating: 15 amps Dimensions Wire length: 120" Connections Connector type: 12Vpower outlet socket Wire gauge: 14 AWG two-wire Included Components 12V outlet socket Wiring harness In-line fuse holder ATC blade fuse Connectors Shrink tube Mounting screws Warranty 3-Year limited
... Covers the seat and seatback of a front seat or can be laid flat to share with a friend in the backseat. Works with your 12Vpower outlet.It's the perfect way to keep your seat warm on a cold morning commute or a long road trip on chilly night. The included adapter plugs into the 12Vpower outlet in your vehicle or power station. The pad can also use a USB-C Power Delivery connection in your power bank or station when you are away from your vehicle.
Convert your vehicle's 4-way to a standard 7-way socket. Flat, 4-pole connector plugs into your vehicle and additional wire leads pull 12Vpower for accessories and send signals for the electric bracks and auxilary, or reverse.Features: Adapter converts the 4-way flat trailer connector on your vehicle to a 7-way socket 4-Way flat trailer end plugs into the 4-way flat on your vehicle Socket plugs into a 7-way RV blade connector (sold separately) Enables installation of the Curt Echo brake controller on 4-flat vehicles Additional wire leads for 12Vpower, electric brake function, and auxilary or reverse function 1-Year limited warranty
Love exploring the outdoors but don't want to compromise on comfort when the temperature drops? This smart control heated blanket runs off 12-volt DC power from your car or power station to keep you cozy wherever your adventure takes you.Features: Heated blanket runs off 12Vpower to provide necessary warmth, in even the most remote locations Smart controller remembers your heat preferences in 3 different zones Upper heat zone and foot heat zone emit extra heat to keep your extremities toasty Middle heat zone emits less heat to prevent your core from getting too hot Built-in, adjustable timer prolongs battery life Power cord plugs into any DC accessory power outlet or power station Eco-friendly, 100% post-consumer recycled polyester and insulation are lightweight and minimize your environmental footprint Matching drawstring bag can be secured to your pack with its convenient carry strap Blue, topographical pattern Specs: Fits 1 person Dimensions: 72" long x 52" wide Input: 12V Max temperature: 140 F Max current: 4 amps Rated power: 48 watt
This 6' adapter cord lets you plug your Ignik Heated Sleeping Bag Liner or Backside Heated Seat Pads into your vehicle or power station's 12Vpower outlet. Converts your 5.5 mm barrel plug into a 12Vpower plug.Features: 6' Adapter cord lets you connect an Ignik heating accessory into your vehicle or power station's 12V outlet Converts your 5.5 mm barrel plug to a 12Vpower plug Works with Ignik Heated Sleeping Bag Liner and Backside Heated Seat Pads Limited lifetime warranty
Keep your devices ready to capture epic moments. This Redarc charger powers your phone, laptop, or other gear fast with dual USB-C and USB-A ports. It's rugged, reliable, and has a snug fit that keeps it plugged in on any trail.Whatever the weather throws at you, your devices stay powered. Specs: Output sockets: USB-A and USB-C Total wattage: 83 watts USB-A: 18 watts USB-C: 65 watts Input voltage: 12V to 24V DC Output voltage: USB-A: 5V/3A, 9V/2A, 12V/1.5A USB-C: 5V/3A, 9V/3A, 15V/3A, 20V/3.25A, 3.3V-11V/3A Operating temperature: 32F to 113F Weight: 1.73 oz Dimensions: 1-11/16" tall x 1-1/4" wide x 2-15/16" long Warranty: 2 years
Power your Roadmaster brake monitor from a USB port with this replacement power supply cord. Designed for the Roadmaster 9530 Brake Monitor, this cord replaces the original 12V plug and allows connection to modern RV USB power ports.Features: Replacement USB power cord for Roadmaster 9530 Brake Monitor Lets you power the brake monitor from a USB port instead of a 12V dash outlet Ideal for newer RVs that use USB power ports instead of traditional 12Vsockets 4 mm barrel connector fits accessories that use a compatible DC power jack Specs: Power source: USB port Connector size: 4 mm barrel with 1.7 mm internal hole
Finish your Nissan Armada or Titan tow package with a dual 7-way/4-way socket and relay kit. USCAR plug-in connector mounts at the hitch, while included relays complete the power and signal circuits.This kit includes the large brown relay for the 12Vpower circuit and 2 small blue relays for the turn signal circuits, completing the wiring needed to power your trailer connections at the rear of your vehicle.
... Bright LEDs mount inside your vehicle's tail light housings, with the wiring out of sight. Includes 7-to-6-wire adapter cable and 6-wire socket.Features: LEDs display your RV's tail, turn, and brake signals on your towed car without tapping into its wiring Avoids risk of damage from electrical feedback Has no effect on your warranty Mounts inside car's tail light housing - requires drilling a 1" hole Shines brighter and more efficiently than incandescent bulbs 7-Way to 6-way adapter cord runs power from the motorhome to the towed car Coiled to prevent dragging and tangling Resistant to the elements with vinyl coating 6-Way socket hardwires to towed car and mounts on front bumper Kit includes: 2 Red bulbs with sockets 4-Wire harness 7-Way to 6-way adapter cable 6-Way socket Butt connectors, zip-ties, wire loom, and installation hardware Made in the USA Specs: Adapter cord length: 8' when extended 16 Gauge Wiring harness length: 27' Light output per bulb: 450 lumens Overall length of bulb: 2-1/2" Length of bulb from flange to top of bulb: 2" Wire loom: Length: 3' Diameter: 1/2" 1-Year limited warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
Add or replace a 12-volt powersocket on your RV or marine application to charge your electrical accessories. Waterproof cap ensures a complete seal when not in use. ... Features: Add or replace a 12-volt powersocket to charge your electrical accessories Perfect for RVs, boats, and off-road vehicles Waterproof cap protects against water damage Easy installation with included quick nut Requires a 1-1/8" diameter cutout Spade terminals hardwire to 12V DC power source RoHs compliant Specs: Length: 1-7/16" Diameter: 1-1/2" Current: 10 amps 1-Year limited warranty
Smart diodes are our favorite option for getting brake and turn signals on your towed car. They are really well-made and reliable, plus pretty easy to install. This complete kit includes everything you need for multiplex LED tail lights.Features: Smart diodes correctly display RV's brake and turn signals on your towed car with variable voltage LED tail lights Converts the 12V signal from your RV to a 9V signal so your tail lights work as intended Prevents feedback that can damage your vehicle's electrical components Keeps the battery from draining while flat towing Resists corrosion with powder coated aluminum casing 7-Way to 6-way coiled adapter cable runs power from your motorhome to your towed vehicle Coiled to prevent dragging and tangling Resistant to wear and tear with durable vinyl casing 6-Way socket hardwires to towed car and mounts with included bracket Kit includes: 2 Smart diodes 4-Wire harness 7-Way to 6-way coiled adapter cord 6-Way socket with mounting bracket Butt connector, split loom, ring terminals, zip ties, and installation hardware Assembled in the USA Specs: Application: variable voltage tail lights with LED bulbs only Maximum amperage: 5 amps Maximum voltage: 16 volts Wiring harness length: 27' 14-Gauge wire length: 10' Maximum power rating: 60 volts Operating temperature: 40 F to 176 F Coiled cable: Max length: 8' Compressed length: 15" Limited lifetime warranty Notes: A brake light relay (RM-88400 - sold separately) may be required if used with a flat tow brake system.
Smart diodes are our favorite option for getting brake and turn signals on your towed car. They are really well-made and reliable, plus pretty easy to install. This complete kit includes everything you need for multiplex incandescent tail lights.Features: Smart diodes correctly display RV's brake and turn signals on your towed car with variable voltage incandescent tail lights Converts the 12V signal from your RV to a 9V signal so your tail lights work as intended Prevents feedback that can damage your vehicle's electrical components Keeps the battery from draining while flat towing Resists corrosion with powder coated aluminum casing 7-Way to 6-way coiled adapter cable runs power from your motorhome to your towed vehicle Coiled to prevent dragging and tangling Resistant to wear and tear with durable vinyl casing 6-Way socket hardwires to towed car and mounts with included bracket Kit includes: 2 Smart diodes 4-Wire harness 7-Way to 6-way coiled adapter cord 6-Way socket with mounting bracket Butt connectors, split loom, ring terminals, zip ties, and installation hardware Assembled in the USA Specs: Application: variable voltage tail lights with incandescent bulbs only Maximum amperage: 5 amps Maximum voltage: 16 volts Wiring harness length: 27' 14-Gauge wire length: 10' Maximum power rating: 60 volts Operating temperature: 40 F to 176 F Coiled cable: Max length: 8' Compressed length: 15" Limited lifetime warranty Notes: A brake light relay (RM-88400 - sold separately) may be required if used with a flat tow brake system.
Smart diodes are our favorite option for getting brake and turn signals on your towed car. They are really well-made and reliable, plus pretty easy to install. This complete kit includes everything you need for multiplex LED tail lights.Features: Smart diodes correctly display RV's brake and turn signals on your towed car with variable voltage LED tail lights Converts the 12V signal from your RV to a 9V signal so your tail lights work as intended Prevents feedback that can damage your vehicle's electrical components Keeps the battery from draining while flat towing Resists corrosion with powder coated aluminum casing 7-Way to 6-way coiled adapter cable runs power from your motorhome to your towed vehicle Coiled to prevent dragging and tangling Resistant to wear and tear with durable vinyl casing 6-Way socket hardwires to towed car and mounts with included bracket Kit includes: 2 Smart diodes 4-Wire harness 7-Way to 6-way coiled adapter cord 6-Way socket with mounting bracket Butt connector, split loom, ring terminals, zip ties, and installation hardware Assembled in the USA Specs: Application: variable voltage tail lights with LED bulbs only Maximum amperage: 5 amps Maximum voltage: 16 volts Wiring harness length: 27' 14-Gauge wire length: 10' Maximum power rating: 60 volts Operating temperature: 40 F to 176 F Coiled cable: Max length: 8' Compressed length: 15" Limited lifetime warranty Notes: A brake light relay (RM-88400 - sold separately) may be required if used with a flat tow brake system.
Filters
