Trailer Wiring And 7-Way Upgrade Kit For A 2019 Audi Q8
I have a Audi 2019 Q8. It has the hitch but not the wiring harness to power lights on the trailer. Do you have a wire harness I can use for this car? | For your 2019 Audi Q8, you can use the: -Tekonsha ZCI Circuit Protected Vehicle Wiring...
Will The Curt Adapter C35FR Work On A 2024 Audi Q8
Will this work properly on a 2024 Audi Q8 eTron with the factory towing package? I’d like to use it with a kayak trailer that has a 4 pin connector and LED lights. Thank you | Yes, the Curt adapter # C35FR is exactly what you will need to use...
Hitch Confirmed to Fit a 2022 Audi Q8
Is there a hitch option for the 2022 Audi Q8? | There is. The Stealth Hitches Hidden Rack Receiver # 391AUDQ818 is confirmed to fit all models of the 2022 Audi Q8. This hitch is made in the USA, has a bolt-on, no-drill installation and will...
What are the Dimensions of the 2006 Monaco LaPalma Roadmaster Rear Anti-Sway Bar RM-1259-109
My motorhome is an 06 Lapalma diesel pusher...34 Im pretty sure the Roadmaster 1259-109 is the bar Im needing... Question... Can you give me the length of the arm from the center of the torsion bar...ive measured the chassis and it appears that...
Troubleshooting Tekonsha Prodigy RF Not Pairing To 2020 Audi Q8
Hello I am having trouble connecting my prodigy rf to my audi q8. The trailer directly connects to the car with no issue and lights all function, but I cannot pair the controller. I saw a post recently However, I am wondering that since the...
Trailer Hitch Extension for 2 Inch Hitch on 2019 Audi Q8
I have a new vehicle Audi Q8 with trailer ability factory installed. I tow a double jet ski and want to prevent the rear wheels from going in the salt water. I would use the device only on the ramp and not to tow on roads. I was hoping a 36...
Comparing Radial Vs Bias Ply Tires
Are karrier, or loadstar the better Kendra tire? Pulling a 2018 aliner scout. Also, planning to go from bias to a radial tire, if it is an upgrade. | There are a few advantages and disadvantages when deciding between bias ply # AM3S334 and radial...
Availability of Trailer Hitch Receiver for 2024 Audi Q8 e-tron
I have a 2024 Audi Q8 e-tron and I'm looking for a hitch that fits. Not sure if there is one or not. Are you able to help me? | There is one hitch available that fits your 2024 Audi Q8 e-tron. That hitch is the Stealth Hitches Hidden Rack Receiver...
Ceiling Garnish Options for Fan-Tastic Vent Upgrade Kit Compatibility
Will I need a deeper housing assembly, topside, if I upgrade? | The Fan-Tastic Vent 7350 Series Upgrade Kit - High/Low Style Base - White # FV807359 you asked from will allow you to use a ceiling garnish in the depth you desire on the bottom...
Replacement Jam Nut for 19F0J Wheel Liners
My wheel studs are 3/4”. I ordered the 19f0j which has approximately 1/2” threads. I can’t find the specs on it. | Since you said you ordered the 19F0J wheel liners then you need part # WM9073 instead as this is the correct fit for them and...
Hi I have a new Audi Q8 with factory fitted cross bars. Im looking to mount a fishing kayak weighing circa 100lbs flat on top and need suitable cradle system. Please recommend. | To add a kayak carrier to your Audi Q8's factory crossbars you...
Can I Use the Curt Echo Mobile Brake Controller in a 2019 Audi Q8
Will this fit an Audi Q8, getting conflicting reports. | All that is required to make the Curt Echo # C51180 compatible with a vehicle is a 7 way trailer connector with a dedicated 12v charge line. As long as your 2019 Audi Q8 has a 7 way where...
Aluminum Ball Mount and Cushioned Hitch Ball for Use with 2021 Kia Telluride
I have 2021 KIA Telluride I have purchased a receiver form you guys and I need to get ball mount and my measurements are 14.25 at the the receiver and the trailer level is 16.0 that being said puts me at 1.75 of rise so I round that up I guess...
Recommended Replacement A-Frame Jack For A 2021 Aliner Ranger 12
Hi - Just bought a Aliner Ranger 12 A-Frame Campler ~1600lbs and promptly bent the trailer jack. It was a RAM 2000 series 3,000 maximum. Im pretty much looking for an exact fit replacement as I do have a wheel and I believe the screw holes...
Converting 4-Pin to 7-Pin On A 2003 Ford E350 And Brake Controller Recommendation
Still waiting on an answer about converting a 4 pin to 7 pin trailer hookup for an RV—2003 Econoline E350. I also need the brake controller. Would like to know what will fit. | Hello again, Janine. It looks like you are on the right track...
Can 175/80-13 Radial Tires be Used on the Same Rim as 175/80-13 Bias Tires
I currently have Loadstar K550 tires ST175/80 D13. A bias tire I am looking to replace with Karrier ST175/80R13. Item #10210. A radial tire. Should the same rim be compatible with the change. Looking to replace an aliners standard tires with...
Recommended RV Cover For A 2018 Aliner Ranger 12 Pop-Up Camper
What cover is best for this camper given the bubble windows that may be susceptible to scratching/ | For your 2018 Aliner Ranger 12 Camper I recommend the Adco Polypropylene RV Cover for Pop-Up Camper # 290-2894. This polypropylene cover is...
Retracted and Extended Height of Dutton Lainson Trailer Jack DL22530
What is the retracted length of this jack? | The retracted height of the Dutton Lainson Trailer Jack # DL22530 is 8-1/4 inches and the extended height is 23-1/4 inch. From the mounting bracket to the top of the jack measures 15-1/4 inches. |
Troubleshooting Curt Echo Mobile Brake Controller that Required Higher Settings Second Use
H have a Subaru Outback 2020. I purchased the 7 pin conversion kit you recommended and the Curt Echo. The first time I tested it with my pop up camper I had to set it to at least 80 on the output setting for it to activate enough. The next time...
Recommended Flat Towing Setup For 2009 Chevy HHR Behind 2005 Monaco Motorhome
Hi, I have a 2005 Monaco Motorhome that I recently purchased. It came with A Roadmaster Stowmaster tow bar. I have the tow bar, safety cables and wire harness on the RV. I intend to tow a 2009 Chevy HHR not SS. I also have the brackets which...
Tool Recommendation for Shortening Length of Ventline Roof Garnish
Question: Im trying to determine which garnish trim that I need for my 2000 Fleetwood Southwind Storm 30H. The roof is 4inch inches thick and the garnish that I need to replace is 4-1/2inch in height. Which garnish trim do I need? asked by:...
Filter Your Search
Contact and Help