!Liberty Travel Trailer x > E3 Camper x > F-450 and 550 Cab and Chassis x >

Trailer Hitch Availability for a 1989 Winnebago Warrior

I am looking to buy a trailer hitch for my old RV. 1989 Ford Econoline. Winnebago Warrior. 7.5 Lit engine. Can you help? Thank you. | The only type of hitch we offer that could work on your 1989 Winnebago Warrior would be a multi-fit hitch...

Trailer Hitch Recommendation for a 1996 Ford F-450 Cab and Chassis

I have a 1996 Ford Superduty f450 and I am trying to find the correct hitch receiver to install on it. | I spoke to my contact at Curt and he told me that you will most likely need to drill some holes, but the Curt Hitch part # C15445 would...

Can Tekonsha Primus IQ # TK90160 be Installed on Winnebago Motorhome with Tag Axle

I have a Winnebago Motor home. It uses a Ford F53 Chasi and also has a Tag axel which uses elec brakes same as a trailer I suppose. Do you think your brake controller would be a good idea for the Tag axel????? | I spoke with my contact at...

Storage Cover Recommendation for a 2018 Somerset E3 Camper

Good day. I am in need of a new cover for my 2018 somerset e3 deck Popup camper with two LP tanks and battery on the a frame. I’m looking for something heavy duty stored outside in the elements as well as something long enough to cover...

Trailer Hitch Recommendation For 1993 Ford F-450 Cab And Chassis

I am pulling a 7000 lb trailer with equalizer hitch. I need a trailer hitch for a 1993 Ford F Superduty what do you recommend? | The hitch I recommend for your 1993 Ford F-450 Cab And Chassis is the Draw-Tite Trailer Hitch, part # 40050. This...

Recommended Snap In Curtain Carrier for a 2018 Somerset E3 Camper

curtain rod clips for the valance on my e 3 and curtain rod set screws 10 thank you | We do not have any set screws for curtain rods, however we do have the Snap-In RV Curtain Carriers # 37281455 which you could use instead to secure and...

Where Do the Wires Attach on Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector

I just purchased this item, but the one on the vehicle only has colors listed. the new one doesnt have colors. So i am looking for info on which color is which location on the back of socket. this is on a 97 f 450 stake body dump bed. thanks...

Class IV or V Trailer Hitch for a 1988 Ford F-450 Cab and Chassis

Im looking for a Class V hitch to fit a 1988 F 450 cab /chassis. Its just a toy ATM but a class III or IV seams wrong. | What you will need to do is install a weld-on heavy duty truck trailer hitch like in the link I have provided. All of these...

What is the Axle Capacity for an Old Trailer with Hub # 22834

I have an old camp trailer frame and axles. How do I determine the weight rating on the axles? They are 2solid axles. The bearing numbers are: inner-2788 outer-1772 or 1779 hard to read. | The bearing numbers you have provided indicate that...

Installing DX2 Brake Controller On Fleetwood 1995 Bbounder Ford 450

I took the plugin off the break switch and read out the hot side. When I tied in to the non power side and reinstall the plug in on the switch I get the same voltage across the switch as the hot side unplugged. The break lights do not come...

Gooseneck Trailer Hitch for a 1996 Ford F-450

I have a 96 F450 FSeries that I need a gooseneck hitch to bolt to the frame. I was unable to find one on your site. Do you have one available, or do you have a universal gooseneck hitch that requires fabrication by a welding shop? Im interested...

Locating a the Brake Output Wire to Install a Brake Controller on a Motor Home

i have a 1998 ford super duty tioga motorhome. I have found the factory trialer brake receptacle under the dash and have been able to use pigtail to Teconsha controller. what i fail to see is the blue trialer brake wire at the rea of motorhome...

<< Back to Results

Filter Your Search