Result: knobs

The lever below manuel knob can be activated and braking does occurs and the display reads out the proportion of braking. | Have installed a Prodigy P2 that is used on two different vehicles, 2001 Isuzu NPR with GMC gas engine,...

Set the power output to the maximum 13 volts using the power knob and activate the manual knob. Use a volt meter to test the output on the blue wire. | I have installed the Prodigy 90185 into my 2007 Honda...

07 Pathfinder, tow ready, has worked great with your brake controller...just noticed I dont hear relay click when braking, and I have no power through tow harness...I have looked everywhere under dash for relay, even in the kick panels...could it be located behind ac knobs? Need some help before going to shop. |

This controller is nice due to it having only a knob visible, instead of an entire controller that you hit your knees on when getting in and moving around. | Hi, I want to install The Redarc Tow Pro Liberty # RED24FR to my...

If you are getting power on the black wire exiting the rear of the controller, but are not seeing any readout on the screen, try adjusting the power knob. If you still see nothing, the controller is probably faulty. | I bought...