Result: Brake Controller with Wiring

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36" long…

In order to actuate your trailer brakes, you'll need to install a brake controller to operate them, as your truck doesn't already have a brake controller. Since your Dodge Ram 2500 doesn't have the factory 7-way, not all the brake…

The Mopar brake controller is identical to the one they put in at the factory on certain Ram trucks. It is made specifically to fit the trucks it was designed for. In the aftermarket options there is nothing that is going to fit the same but they are…

For your 2020 Forest River Geo Pro I recommend using the Adjustable Width Trailer Hitch Receiver #13703, this will fit most trailer frames; spanning from 22" to 72". This hitch will use the bolt holes on the frame of your trailer to mount,…

I reached out to my contact at Lippert and based on the information you provide your axle has an axle rating of 5200lb, measures 86-1/2" hub face to hub face, 68-1/2" spring center to spring center, has the springs installed above the axle,…

The first thing I would do is check the brake output circuit on the 7-way of your tow vehicle. You will want to use a circuit tester like our part #3808 to check for voltage at this circuit when the manual override of your brake controller is…

It sounds like you have the brake mounting flange for Hayes/AL-KO brakes. The standard 5-bolt brake mounting pattern on #AKEBRK-6 will not work. We do have brakes that have that mounting pattern though. You will need #23-105-09 for the left and…

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

The trailer running light issue you are having with your 2006 Nissan Frontier is pretty common as Nissan for some reason left out the relay needed under the dash panel. Check out the picture I attached to see where you'll find where the relay…

To install the Redarc Tow-Pro Liberty Trailer Brake Controller #RED24FR you were looking at all you will need is the Plug-In Adapter #RED39FR. This will plug into the controller of the #RED24FR and then plug directly into the factory trailer brake…

You are correct that the parts you need for your 2021 Nissan Frontier include the Redarc Tow-Pro Liberty #RED24FR and the Wiring Adapter #RED39FR. I'm not seeing that there are any specific mounting panels for your 2021 Nissan Frontier so what I…

The Redarc instructions for the Plug-and-Play Wiring Harness #RED39FR you purchased only lists through 2019 because they haven't updated the instructions as of yet, but the adapter will fit your 2023 Nissan Frontier and allow you to install the…