Result: Brake Controller

I want to add a brake controller to my truck, its a 72 Chevy K10 truck, now, can you provide me | I want to add a brake controller to my truck, its a 72 Chevy K10 truck, now, can you provide me with a controller...

Does Tekonsha make a time delay brake controller that uses the same wiring harness plug as the P3 | Does Tekonsha make a time delay brake controller that uses the same wiring harness plug as the P3? I have installed...

We have everything that you will need to add a 7-way trailer connector and a brake controller | There is no 4 way connector or anything on my truck and i want to add a 7 pin trailer connector along with trailer...

trailers that use a 7-way connection the Universal Installation Kit for Trailer Brake Controller # ETBC7 | Will this hitch fit with a step bumper ? | Yes, the Curt Trailer Hitch Receiver # 13028 will fit with...

what gauge of wires I should run for both the hot lead and the brake control wire. thanks. | I am rebuilding a 1972 chev truck. I am at the frame stage now. I want to run the wires for future electric brakes...

be combined with our 7-Way Kit # ETBC7. This will allow you to install a Brake Controller # 90195 | need 6000 lb hitch for 1972 c10 chevrolet. | If your 1972 Chevrolet C10 pickup has a standard bumper you will...

with brake controller you will also need the Universal Installation Kit # ETBC7 and a Brake Controller | i have a step bumper on my 1972 k-20 so i will need 1 that will clear...

Trailer Brake Controller # 90195 can be installed with the 7-way wiring. | Hi, I have a 1972 Chevrolet K10 4WD truck. It has a 307 V8 engine w/ 3 speed on the column. It has leaf springs on the front and...

with electric brakes. My vehicle is rated with max. tongue weight of 500 lbs. and max trailer weight at 3500 | Hello ...reviewing installation instructions for receiver #13580 for a 1972 International Scout II equipped with...