Search: Step Support > RV Step Covers > Riata x > Windstar x >
How To Use The Adhesive In The RecEnergy Membrane Plus RV Roof Replacement Kit
After rolling out the EPDM Membrane (on your roof) from the RecEnergy Membrane Plus RV Roof Replacement Kit - 42' Long - White # PM32VR you got to check the fit, you will follow the steps I have listed below: 1 - Fold back one half of the membrane. 2 - Stir the water-based acrylic adhesive and apply it evenly to the exposed substrate using a 9-inch short-nap paint roller. 3 - Allow the adhesive to tack up/dry for approximately 20 minutes. 4 - Slowly roll and lay the EPDM membrane into the adhesive. 5 - Use a push broom, roller, or squeegee to smooth out the membrane and push out any air bubbles or wrinkles. 6 - Repeat the gluing and smoothing process for the second half of the roof. |
Recommended Transmission Cooler and Weight Distribution for Towing Pop-Up With 2003 Ford Windstar
An air bag suspension is more appropriate for supporting weight carried in the cargo area of your van. | Hi, I just bought a pop up camper with a dry weight of about 1550#s. The van does not have a tow package. Im am hearing...
Related Searches
Filter Your Search
Contact and Help