Result:

I am getting a rv Either a Buick Enclave or Lincoln mkt need a trailer hitch for both class 3 and tow bars and everything else for each. | I am getting a rv Either a Buick Enclave or Lincoln mkt need a trailer hitch for...

If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level. | Will this hitch...

This provides 1,000 lbs of load-leveling support to improve safety and ride quality. | Hello, I have a 2014 Buick Enclave AWD and I would like to tow a pop up trailer about 3500 lbs. I need to know if you sell a complete package...

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | can the 2012 Enclave AWD be flat...

A non-binding tow bar will let you easily disconnect your tow bar even if your coach and towed vehicle is not on level ground or at a difficult angle. When your coach and towed vehicle are hitched together on level ground, the tow bar should be within 3” of level, otherwise you will need to add a High-Low Adapter. |

There should be a sticker on the hitch but if not the capacity is probably in the RV literature. Assuming that the RV and hitch are rated high enough you will need base plates, a tow bar, safety cables, lighting, and supplemental braking to tow your 2013 Buick Enclave. |

According to the online version of the owner's manual for the 2012 and 2013 Buick Enclave, it can indeed be flat towed behind an RV with all 4 wheels on the ground. I highly recommend verifying this information in your copy of the manual as well as reading through any guidelines or restrictions when it comes to flat towing. |

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

Instead I recommend using the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 which will splice into your vehicle wiring and comes with diodes to protect the RV from any back feed in the event of a short....