Parts Needed to Flat Tow 2011 Ford Flex With 2015 Winnebago Vista 36Y
I recommend the following: -Blue Ox Base Plate Kit # BX2604 -Blue Ox Avail Non-Binding Tow Bar # BX7420 (includes safety cables) -Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-15267 -Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes # SM99251 -Roadmaster Brake-Lite Relay Kit for Towed Vehicles # RM-88400 (required for brake system) In addition to these parts you may also need a high-low adapter to keep your setup level. |
Can a 2009 Ford Flex AWD be Flat Towed behind RV
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | Can you tell me if the awd 2009 ford flex can be...
Recommended Parts to Flat Tow a 2019 Ford Flex
To flat tow your 2019 Ford Flex you will need the following parts: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-524435-5 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Battery Disconnect Switch - Roadmaster Automatic Battery Disconnect item # RM-766 Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |
Filter Your Search
Contact and Help