bing tracking image

RV Levels   >   RV Levels  x   >   Reno  x   >   Expedition  x   >  

Result:

Recommended Adjustable Multiple Ball Mount For a 2020 Ford Expedition

Trying to decide which Hitch unit with a 2inch and 2 5/16 inch hitch since I also pull a RV with a 2 5/16inch ball on a Blue OX load leveling hitch? | What rise or do I need on my vehicle for pulling a Hurricane...

Correct Repair Kit for Venture VMC900 Landing Gear Legs

Top plate has a part number VMC900R-435511 inside. Equipt with LCI leveling, each leg has its own electric motor to power jack leg. | Looking for a repair kit for front landing gear on 2014 Dutchmen Voltage 3950. Sheared...

Using a Thule T2 Bike Rack Behind a Travel Trailer

Thule doesn't recommend any of their bike racks be used behind RVs or trailers. Generally, RV compatible racks are either two bike platform racks or 4 or 5 bike hanging racks. | The Thule T2 4 bike hitch...

How to Improve Sway Control with Blue Ox SwayPro WD System Installed on Trailer with Ford Expedition

Any thoughts? I had an rv dealer install the hitch and it looked level with my expedition, but the sway bars look like they are too low. | I have a travel trailer and recently installed a blue ox sway pro....

Recommended Flat Towing Parts for a 2007 Ford Expedition

To flat tow your 2007 Ford Expedition you will need the following parts: Tow Bar and Safety Chains - Roadmaster Sterling All Terrain Tow Bar item # RM-576 and item # RM-643 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # 4410-3 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Supplemental Braking System - Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524 High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

Recommended Flat Towing Parts for a 2019 Ford Expedition

To flat tow a 2019 Ford Expedition Max 2WD you will need the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item # e84ZR Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-524457-5 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Charge Line Kit - Roadmaster Battery Charge Line Kit for Towed Vehicles item # RM-156-25 Supplemental Braking System - Blue Ox Patriot Radio Frequency, Portable Braking System item # BLU37TR High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

Recommended 7-Way Trailer Connection Wiring On 2015 Ford Expedition

It is adjustable to your driving preferences an has 3 levels of boost. | I have a 2015 Ford Expedition equipped with a 4-pin trailer connector and one extra wire at the bumper that is labeled electric brake. There is no OEM...

Parts Needed to Flat Tow 2018 Ford Expedition

This kit will allow you to wire your Expedition to accept your RV's tail, brake, and turn signal lights for towing. | We had a Blue Ox tow bar base plate on our recently totaled Jeep GC.. We still have the removable pins...

Parts Needed to Flat Tow 2021 Ford Expedition

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | Looking for a towbar system to use...

Recommended Flat Towing Set Up for a 2019 Ford Expedition

Here are the rest of the parts you'll need to flat tow a 2019 Ford Expedition: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item # e94ZR Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Charge Line Kit - Roadmaster Battery Charge Line Kit for Towed Vehicles item # RM-156-25 Supplemental Braking System - Blue Ox Patriot Radio Frequency, Portable Braking System item # BLU37TR High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

Does Air Lift Offer 7,500LB Spring Kits For 2014 Expedition, 2015 Silverado 1500 or 1996 P30 Chassis

I have 3 vehicles to install air ride suspensions on, this ford, a 2015 Silverado 1500 Extended Cab LT 5.3L V8 and a 1996 P30 7.4L V8 OHV 16V RWD RV. All need automatic leveling and in cab controls and 7500lb lift. |

Weight Distribution For 2018 Ford Expedition Towing 8,500lb Travel Trailer

The weight distribution system instead applies pressure to your towing rig to center and level the overall towing setup. The result is less sway and a safer, more enjoyable experience for the whole family. | Hi, Wondering...

Will 2018 Ford Expedition Battery Drain when Flat Towing it Behind an RV

Flat towing 2018 Ford Expedition Does the vehicle remain on during towing? Does this drain the battery? | According to the 2018 Ford Expedition owner's manual: ". . . turn the ignition as far as it can go toward the off position. It does not...

Parts Needed to Flat Tow 2019 Ford Expedition

When your coach and towed vehicle are hitched together on level ground, the tow bar should be within 3” of level, otherwise you will need to add a High-Low Adapter like the Blue Ox # BLU34TR. | I am leasing...

Filter Your Search