Result: Spring Loaded Pull Pin

A trailer jack lifts and supports a trailer tongue, and keeps it level when not attached to the tow vehicle. Jacks vary in capacity and features for different applications.

Three mounting styles for side mount jacks: 1. Pull-Pin Swivel Trailer Jacks Pull-pin swivel jacks clamp on or weld to the trailer frame Clamp-on style fit frame sections up to 3" wide x 5" tall Weld-on style can mount to frame in any convenient location Capacity: 800 lbs to 1,500 lbs A pull pin holds the jack in position - simply pull the pin to release the jack and change its position The pin is spring loaded so that it will automatically snap back in when the jack reaches the stow or jack position Lightweight marine trailers frequently use these kinds of jacks, which are often zinc coated for extra resistance to corrosion that salt water can cause Typically a wheel is included to make it easy to manuever the trailer 2. |

How to install a trailer hitch. General information about the installation of trailer hitches on cars, trucks, and suvs including bolt-on, minor drilling, fish wire and other methods to make installing a hitch easy.

Check the instructions to make sure the correct parts go on each specific lead. Do not countinually pull on the wire if it gets stuck. If the wire is pulled too much the bolt will strip out of the bolt leader and can get lost in the frame. |

Description on how to remove, grease, and reinstall trailer bearings, races, and seals. Also some quick tips on backing the bearings with grease.

The most common is a cotter pin. Just bend it straight and pull it out. Then you may see what is called a "tang washer." | No parts are more critical for the dependable performance of your trailer than the...