Result:

That completes installation of the 7-Way RV connector at the rear of the vehicle. Installing the brake controller in the cab is now just an matter of plugging the # 3025-P harness into the under dash port, see link, and the back of the brake controller, then mounting the controller in an accessible location. |

To install, you will need to remove the rear fascia door that covers the hitch, but it can be reinstalled when not towing with two bolts. | How much for a hitch and all the components and please do you suggest...

You will find the connection point in the rear cargo area behind the access cover at the center of the rear harness. | What kind of wiring do I need to get my 2022 Chevrolet...

Couldnt I mount this on my bumper bar, just like an rv bumper? I know I would need to alter the bumper cover, but aside from that, would this work as i described? | Hi, i was looking for a hitch for my vue and...

The # TK69FR T-One connector plugs into your vehicle's wiring harness, which is located in the rear cargo area. You will have to remove the plastic threshold cover, side panels, cargo trays, and interior trim panels to access this harness. |

The T-One connector plugs into your vehicle's wiring harness, which is located in the rear cargo area. You will have to remove the plastic threshold cover, side panels, cargo trays, and interior trim panels to access this harness. |

Only a flat 4 socket on the rear bumper. Im thinking start from scratch with wire from the battery to the rear bumper. | I need to prep a 2002 Expidition for RV towing, It was not factory preped and doesnt...