Result:

Hello I have a question on my 05 copper canyon sprinter.I bought this trailer used a few weeks back.In order to get 6 inches between tailgate and rv the nose of the camper is way up in the air.my springs dont seem shot on trailer.But ive noticed the rear trailer tires are rubbing on floor of rv. i believe it was supposed to have 205/75r15 tires from factory and it has 225 on it .If i go back to 205/75 it will help the rubbing situation but make the rv even lower. also my axle is already under the springs.do they make blocks and longer ubolts like for the rear of a truck or a taller center equalizer.I am at a loss as to what to do. |

Yes, the tow bar wiring harness # HM56008 will work as a combined system, with the brake lights and turn signals on the same circuits. | Michael, Thank you for your reply re: 118549. I understand to use HM56008 and the 7 round...

I am going to be using a Brake Buddy Classic system. Which wiring product do I need? Is there a conflict with Jeep brake lights and RV brake lights? | I need to wire a 2012 Jeep Wrangler Sport for flat towing....

To get the right system you would only need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow vehicle. |