Result:

I have included a link to a video review of this camera system for you. | Im thinking of buying 2 of the HM50002 for my 03 ford focus, one for the rear just for backing up dark tinted windows so I can see, and...

| The VueSMART RV and Trailer Backup Camera part # HM34FR does require the running light circuit for activation. | With the LED lights on the back of my cargo trailer with the tailgate ramp how would you hook...

I am about to purchase a small RV for my Jeep Wrangler. I understand that there are options for an extended shank on the hitch to allow room for the rear spare tire. | I am about to purchase a small RV for...

You should also use a weight distribution hitch like the Equal-i-zer Weight Distribution System # EQ37060ET. This will help to distribute the tongue weight of the Bambi across your Telluride so you do not experience rear sag which causes light steering and diminished braking. |

I have attached the installation manual for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling 4-Point System # LC358590 below. It is the same instructions for the 6-Point # LC675817 kit. | I see...

Hello, I have a unique wiring problem that Im trying to work out for my towed RV. In addition to the two existing Stop/Turn/Tail lights, I want to add a third brake light to the rear of my towed RV. |

My tow vehicle is a V10 Ford Excursion with a rear GAWR of 7,000lbs. How will an extension affect my rear axle weight? | I am looking at using an extended ball mount with added sway control to clear a spare...

Note: Ive constructed a frame-supported rear cargo box and bike carrier unit that extents about 4foot beyond the rear bumper - I plan to extend the STOP/TURN/TAIL lighting to the back of this unit. | Hi, Firstly,...

The Roadmaster Tow Bar Wiring Harness Part # RM-154 requires that you locate holes through which you can pass the 4-pole RV connector wiring. It is usually possible to locate rubber grommets that already have wiring passing through them if you remove carpet and trim panels in the rear of the vehicle. |

Im considering wiring 2001 crv using BX8869 Blue Ox for towing by RV. I dont want to use diode system. 1st question is, using the BX8869, how is wire run from front to back - can I go interior via thru fire wall and then by what route to the rear or do I go under vehicle and by what route and then if under where do enter interior to get to tail-lights. 2nd question is I have a blue ox cable harness with a 6 pole round plug on the end to connect to tow vehicle, how do I covert to that from a 4 way flat or can I remove the 4 way flat and connect direct to the 6 way round. |

I would like to purchase everything I need before I go to pick up RV. Any suggestions or recommendations would be greatly appreciated. | I have purchased products from Etrailer in the past and service has been excellent....

Many years ago I worked in the RV field and understand vehicle and trailer wiring very well. | I have a 2012 Honda Ridgeline with a factory 7 way plug. I have a trailer that Id like to add a single LED stop warning light. Many...

Hubby wants to know if you guys carry Brophy part number RHT2, expandable receiver hitch that goes between the rear frame rails | We have an 01 Newmar Kountry Star 5th wheel with a 3 step fold out stair system. We do not want...