Does Red Wire of Prodigy Brake Controller Need to Ground When Brakes aren't Applied
When testing where to hook up red wire from new prodigy brake controller ,the wire from the brake switch only gets 12v when brake applied. But when it is not applied,the wire tests to ground .is that right? | The red wire of a brake controller...
Replacement Brake and Drum Assemblies Fully Assembled
Was wondering do you have any 11 in plates with a full drum assembled? | The electric trailer brake assemblies come in either 12 inch for 5200 to 7000 lb axles like # AKEBRK-7-SA or in 10 inch assemblies like # AKEBRK-35-SA for 3500 to 4400...
Does Front Air Dam Need to Be Trimmed to Install Front Mount Trailer Hitch on a 1998 GMC Yukon 4x4
I wanted to know if the air deflector under the front bumper will have to be cut to receive the ? My goal is to use it for a 4 bike carrier. | In order to install the Draw-Tite front mount trailer hitch, # 65005, the air deflector/fascia must...
Location of Factory Run Brake Controller Wiring on 1998 Suburban
I have a 98 gmc suburban and installing a brake controller. vehical came with wiring harness for the plug installed from factory. The blue line for the controller is there but cant find it in the cab. any ideas where it might be? also there...
Replacement Mounting Brackets for Carr Hoop Side Steps
Do you carry replacement mounting brackets and hardware for Carr hoop steps? Need to fit a 1998 Yukon | Yes, we have the part # CARRBR242K2 which is the correct mounting brackets for the Carr hoop steps like part # CARR121241. |
Will the CIPA Custom Towing Mirrors Fit My 1998 GMC Sierra K2500 4x4 Pickup
Listed to fit 1998 GMC Yukon, will this also fit 1998 GMC Sierra p/U K2500? | Yes, as long as your mirrors look like the mirror on our product page, see photo link, then the CIPA Custom Towing Mirror, # 10201 and # 10202, will work on your 1998...
Filter Your Search
Contact and Help