1998  x   >   Dakota  x   >   TC2000  x   >   2006  x   >  

Do you have a 1998 Dodge Dakota R/T 6.5ft bed extang tuff tonno replacement cover ?part# | The replacement Extang Tuff Tonno cover for your 1998 Dodge Dakota 6 1/2' bed will be the Replacement Tarp for Extang Tuff Tonno Roll-up Soft Tonneau...

I just mounted a 52276-1 to my Dakota. Now I am trying to figure out how to attach my Blue Ox tow bar to it. The adapters I'm seeing online look much shorter than what's on the truck, so they will not twist lock into my 52276-1. Can you point...

I am trying to decide between ordering a keyed lock and the electric tailgate lock. I am not certain, however, how the elecric lock is installed in the tailgate,or where the wires run, or where and how difficult it is to connect the electrical...

Will it fit on 1998 Dodge Dakota? | Yes, the Thule T-Rac Truck Bed Ladder # TH37001XT does fit your 1998 Dodge Dakota! I attached a review video for this for you to check out as well that shows it installed on a similar truck. |

The Blue connector under my dash only has three wires coming out the back. Is this because my truck did not have the tow package? And does this mean I have to hard wire the trailer brake? | For a 2006 Dodge Dakota that does not have the factory...

How long is the hose on this unit? | The Empire Faucets RV Outdoor Shower Box # EM59FR has a hose that is 60" long. |

what are all the deminitions of this part | I went out to the warehouse and was able to get my hands on the Demco Tow Bar Adapter for Roadmaster XL and EZ Series Base Plates # DM9523001 and got the following measurements: -The overall length...

I have lost the draw bars for my ez base plates for my 2006 Dodge Dakota. Is it possible to purchase them separately ? | Yes you can order replacement removable arms for your Roadmaster base plate kit with the part # RM-ARMS. |

Will this fit ba 2006 Dodge Dakota with a 54inch bed | We have exactly what you need, however the Replacement Tarp # EX6770 referenced in your question is designed to replace the vinyl for the Extang model 7770 Tonneau Cover, which is a fit...

Hi, 1 - I want to know if my truck alternator charge my rv batterie when motor is running 2 - I want to know if the current flow both ways when i leave the connector plug and the motor is not running 12v rv batterie + 12v truck batterie | The...

Is my o6 Dakota has the brake controller plug under the dash where would I find the connector in the rear of the truck? | On your 2006 Dodge Dakota if you have the factory 7-way then the connection would be right at your bumper. If this is...

what is the difference between uf48-979032 and uf48-979031 | The Ultra-Fab Ultra Scissor Jacks # UF48-979031 that you referenced is a quantity of 2 of the Ultra-Fab Ultra Scissor Jack # UF48-979032. So its the same jack, but one part number...

Will it fit on a 2006 Dodge Dakota? | Yes, the Extang CargoCleats Truck Bed Tie-Down Anchors, # EX1932, will fit on your 2006 Dodge Dakota. These clamps were designed to fit most trucks that have a lip at the top of the truck bed side wall,...

What product would you recommend for a 2006 Dodge Dakota Quad w/4.7 l V8. engine oil cooler | I would recommend the Derale engine oil cooler kit, part # D15602, for your 2006 Dodge Dakota Quad 4.7L V8. This oil cooler is the stacked-plate design,...

If so do I need any additional brackets? Or is everything included other than the light bar of course? | Yes, the Carr C-Profile Rota Light Mounting Bar # CARR210111 is a fit for your 2006 Dodge Dakota but does also require the Gutterless Mount...

truxedo replacement cover for 2006 dodge dakota shortbed 5ft.part number | In order to tell you the correct replacement tap for a TruXedo tonneau cover we need to know which cover type/series you have. The four TruXedo covers for the 2006...

Is there holes on this grill guard to mount lights and how big of lights, this is going on a 1998 Dodge Dakota pickup | The Aries grille guard # AA5041 for your 1998 Dodge Dakota does indeed have pre-drilled holes in the center crossbar for...

is this type a screw in stud and how do I remove it? Also is there a stud for this 1/2, 20 x 3 inches long | The Dexter Hub/ Drum Assembly you referenced, part # 8-174-5UC3 uses 9/16 x 3 screw-in wheel studs, like part # 25-11. We do not offer...

the cover is 16-1/2 foot long but how wide? | I spoke with my contact at Classic Accessories on the Classic Accessories Deluxe Heavy-Duty Cover for Teardrop Trailer, part # CA80198, and they said the width is 6-1/2 feet. They said the width...

Will this bracket accept 1/2 inch u-bolts or is 7/16 required? | The Boat Trailer Roller Bunk Brackets # DL21742 do require 7/16" U-bolts such as # 7163183UB. The bunk brackets are designed to be used with Roller Bunks # DL21740 or # DL21741. |

Hello, I have an Extang Full Tilt Toneau cover on my 2006 Dodge Dakota Quad Cab, the model number is 8765 and has snaps. I am looking for a replacement cover/tarp for this. Do you carry one that will work? | The correct replacement tarp/cover...

-Any spare tire clearance issues with hitch 75251? FYI- 2006 Dodge Dakota, no factory hitch installed. Thanks....... | For your 2006 Dodge Dakota, the Draw-Tite Max-Frame Trailer Hitch Receiver Class III - 2" # 75251 does not have any clearance...

I need a 2” front receiver hitch to mount a snowplow to. It’s a 1998 dodge Dakota sport 4 x 4 with the 3.9 L V6. What product number should I buy? | For a front hitch that fits your 1998 Dodge Dakota we have the Curt # 31097 which would work...

Is there a 4-pole connector attached with this wiring harness? Thank you Standard Trailer Light Kit with 25foot Wire Harness Item # TL29BK | Yes, the Optronics Standard Trailer Light Kit # TL29BK referenced in your question includes a 25...