Are Wheel Chocks Required with the B&W Biker Bar
Do I still need Wheel Chocks in addition to the Biker Bar | I am sure you could still use a set of wheel chocks in addition to the B&W Biker Bar Motorcycle Tie-Down System part # BWMC2301 but they will not be required. The B&W Biker Bar is all...
B&W Biker Bar to Fit 2014 Harley-Davison Sportster
Will the above part fit my 2014 Harley Sportster 48? It is stock. I dont see my bike model listed on the applicable Sportster Models and want to make sure it will work before I buy this nifty setup for my trailer. | B&W Biker Bar part # BWMC2303...
Which B&W Biker Bar Fits a 2014 Harley Davidson Tri Glide Ultra Trike
Will this work for my 2014 Harley Davidson trike? And is this the right part #? | Yes. The B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring # BWMC2301 will work on Harley Davidson trikes manufactured before 2014,...
Will B&W Biker Bar Motorcycle Tie-Down System Base # BWMC2300 Fit 2010 Harley Davidson Ultra Classic
Will the part number BWMC2300 fit on a 2010 Harley Davidson ultra classic limited motorcycle? | The B&W Biker Bar Motorcycle Tie-Down System Base with Anchor Plates # BWMC2300 will fit your 2010 Harley Davidson Ultra Classic. This will be just...
B&W Biker Bar Systems For Harley Davidson Touring (FL), SoftTail (FLST), Dyna (FX), and V-Rod (VR)
I have the following Harley Davidson: 2016 Ultra limited, 2021 Road Glide Special. These would take the #BWMC 2301 biker bar tie down system for touring models, correct? Also a Harley 2014 CVO Breakout, Is #BWMC2302 correct for that one? Thank...
B&W Biker Bar Compatibility With Custom Harley and Street Glide
Buddie ordered BWMC2304 can I use this for my 2016 HD Streetglide ? | The B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson 1-1/2" Custom Frame # BWMC2304 will fit frame tube diameters between 1-3/8" - 1-1/2" and frame...
Where Does White Wire On Curt 2 Wire to 3 Wire Converter C56196 Get Connected?
From the Khromewerks isolator module on my 2021 Harley TriGlide to the input side of the Curt 56196 converter box, I understand that the running light wire bypasses the converter box. But what about the white ground wire? Does it get cut and...
Trailer Wire Harness for 2006 Harley-Davidson FLHTi Electra Glide
Im having a hard time trying to find a plug and play harness for a 2006 electric glide standard with 5 wires out. At this time my Trailer has a flat 5 pin but I will eventual go to 5 pin round. The right harness is my big issue. Thanks | The...
Is Just Base Available for B & W Biker Bar part # BWMC2301 Available
Can a person order extra base plates for use on multiple trailers? | Just the base of the B and W Biker Bar part # BWMC2301 that you referenced is available as a separate item with the part # BWMC2300. |
Will B&W Biker Bar Motorcycle Tie-Down System BWMC2301 Fit 2013 Harley Davidson Tri Glide
Item # BWMC2301 Will this item work with the Harley Tri-Glide? 2013 model. | Yes, the B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 is fully compatible with your 2013 Harley Davidson Tri Glide. I confirmed with my contact at B&W. This...
Replacement Biker Bar Frame Bar for 1998 Harley Davidson Fat Boy
I have touring base and bar in my trailer. Can I buy just the bar that will fit 1998 fat boy? | The B&W Biker Bar Motorcycle Tie-Down System for Touring Harleys, part # BWMC2301, will not fit a Fat Boy frame but all you need is part # BWMC2302B...
Does Motorcycle Need to be in Gear or Neutral When Transporting with the B&W Biker Bar
Should the bike be in gear while hauling or in neutral? | When securing your Harley-Davidson with a B&W Biker Bar like the part # BWMC2301 you referenced it really doesn't matter if you have it in gear or in neutral. The bar keeps your bike...
5-Way Flat Trailer Wiring Harness for a 1999 Harley Electra Glide
Hello, It appears you have a flat 4-pole trailer wiring harness for my 1999 Harley Electraglide, .... Hopkins Custom Fit Vehicle Wiring - 33525 Plug-N-Tow R Wiring Connectors provide a no-hassle, quick and easy way to wire your vehicle. but...
B&W Biker Bar Compatibility with Air Ride Suspension on 2002 Harley Davidson Road King FLHR
I have an 02 Harley Davidson Road King FLHR. Will aftermarket Air Ride Suspension for rear shocks affect the clamping of the Biker Bar MC2301 in any way?????? Any additional mounting instructions i.e. Completely air up/down the suspension...
How To Tow A Trailer With A 4-Way Using A Motorcycle With Separate Wiring
My vehicle has 5 wires,brake wire,two turn signals and a running lights wire My trailer is 4 wire flat, two combination turn and brake wire and one running lights wire.How do I get them to mate? | Your 2008 Harley Davidson Heritage Softail...
Can the Jensen Heavy Duty Mechless Stereo Be Used on a Motorcycle
Will this work in my 2007 Harley street glide? Does it come with the wiring harness and adapter for my hand controls? | The Jensen Heavy Duty Mechless RV Stereo part # JHD1635BTB is not designed for a motorcycle per say but I don't see any...
Which B&W Biker Bars For a 2017 HD Streetglide Special, and the 2013 CVO RoadKing?
What BandW Biker bars do I use for my 2017 HD Streetglide Special and a 2013 CVO RoadKing? | I reached out to my contact at B&W for this recommendation. The B&W # BWMC2301 B&W Biker Bar is the correct mount for both of your Harleys. I have...
Parts Needed to Install 4-Way Trailer Wiring Harness on 2012 Harley Davidson Electra Glide
I have a 2012 Harley Davidson Electra Glide motorcycle. I am attempting to convert the current 5-wire set-up to a 4-wire system. Bike currently has separate Brake, Turn Signal, and Tail Lamp wires. I need to combine the Brake and Turn Signal...
Which B and W Biker Bar Fits Harley Softails
Why cant I find the Band W biker Bar for the softail models... | The correct B and W Biker Bar for Softail Harley Davidson models is the part # BWMC2302. |
Vehicle Wiring Harness For Trailer Lighting On a 2001 Harley Davidson Road King
im looking for a trailer harness for 2001 harley davidson road king i found #c55376 but it does not confirm fit is this the right part or what do you recommend | I recommend using the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness #...
Recommendation For A Winch To Pull A Harley Triglide Into A Toy Hauler
Bike weighs about 1150 pounds. Ramp is 8 feet long and pitch is about 40 degrees. Will be pulling it backwards to allow pipes to clear. Any suggestions? | Nice ride! I recommend using a power winch like the Superwinch LT2000 Electric Utility...
Will B&W Biker Bar Tie-Down System # BWMC2301 Work for 2015 Harley Davidson FLHTK
Just want to make sure this will fit My 2015 FLHTK? Part Number BWMC2301 And does it come with anchor plates? | The B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 referenced in your question is confirmed to fit all model years of the...
Correct B&W Biker Bar for a Harley Davidson Electra Glide Limited Low
Which model will work with my Limited Low. | I spoke to my contact at B&W and they informed me that the correct B&W Biker Bar Motorcycle Tie-Down System for your Harley Davidson Electra Glide Limited Low is the part # BWMC2301. I have attached...
Will B&W Biker Bar from a 2010 Ultra Classic Fit a 2014 Softail Deluxe
I have a biker bar that was used for a 2010 ultra classic. I would like to use it on a 2014 softail deluxe. Will it fit? | The B&W Biker Bar that you should be using for your 2010 Ultra Classic is the part # BWMC2301 but for your 2014 Softail...
Filter Your Search
Contact and Help