!mercury  x   >   !Maserati  x   >   Mechanics Products  x   >   Flair-It  x   >  

Hi there, since there are no reviews anywhere on the internet for this model and brand winch, can you give your opinion on quality? Also have they been tested by the etrailer staff with notable weight objects? Are the components steel or aluminum?...

Hello, Concerning Flair-It PEX 90-Degree Elbow Fitting - 1/2inch Barb x 1/2inch Barb Item # FL89VR I read that it is for 1/2inch inner diameter tubing. What outer diameters fits? My camper trailer’s existing braided vinyl tubing appears to...

what are the dim of this item . how long or length of power puller | The length of the Power Puller # PT50-101 appears to be around 30" long when fully retracted. It features an 8' cable that can be used as a single pull line of 8' (4,000lbs...

im looking for a bike rack that can accommodate my needs. I drive a 2007 Hyundai Tucson and I have 4 bikes to mount. 1 x Electra Rat Fink 1 x Ladies Electra cruiser 2 x kids Electra cruisers Thanks for your time | For all of your alternative...

Is there an easier tool than this wrench? | The Thule Hitching Post Pro Bike Rack part # TH934XTR that you referenced does use a hitch pin bolt that will require either using the included wrench to install or possibly a socket and ratchet. The...

I have a 2003 Southwind, Workhorse chases. I need a 90 degree connector from the tube to the water pump. No fittings show up when I use your search window. Thank you, | Sounds like you are looking for the Flair-It PEX 90-Degree Elbow Fitting...

Hi - I am looking for a replacement key for an older Thule bike rack. The number on the key is NO12 or N012. Do you carry this key? Thanks | Yes, the key you need is the part # THKEYN012. This matches the lock core you have on your bike rack...

Does Etrailer offer any freshwater fittings for 1/2 inch? | The Flair It PEXLock Elbow Fitting part # FL44ZR that you referenced is a 1/2 inch FPT fitting. If this is the type of fitting you were looking for it would work great. Let me know...

I bought the TH934XTR in January, just completed an 8,000 mile trip to the West Coast and back! Worked great, but I noted some jiggling at times. Tightened up the main bolt and that mostly worked. But when I got home and tore down, I found...

What do you recommend for a Fulton 2” ball coupler A Frame repair kit? I also need a locking 2” anti-rattle hitch pin. Thanks | Fulton does not carry a repair kit for your 2" ball coupler. I recommend replacing your coupler with one easier...

what size wrench do I use to tighten/loosen the snug tight bolt? Thanks. | The size wrench or socket for the hitch pin bolt part # 853-5917 is 3/4 inch. Which we have the socket and ratchet for that size part # PT20104-38524. |

My RV has the old gray pipes. The brass Shark-bite cap is leaking. In one photo of Item # FL73VR Flair-It Cap, it looks like it is threaded. Another photo it looks like it is NOT threaded. Which is it? And how is it installed? Compression...

What is the size of the safety hooks on the PT50-101 power puller? Asked differently, what is the largest diameter object such as a round metal bar they can be hooked onto and still have the clip flip shut? Thank you. | The inside diameter...

Hello, I have this bike rack: Thule Roadway 2 Bike Rack - 1-1/4inch and 2inch Hitches - Tilting Item # TH912XTR And a 2017 Toyota Camry. Would the Draw-Tite Class II Frame Receiver Hitch - 2017 Toyota Camry or the Curt Class II Round Tube...

I have purchased a shower faucet and the threads of the inlet pipes are 1/2-14 NPSM. This connection says the female threads are NPT. Could you confirm if this connector will be compatible with my faucet? thx | Hello Matt, great question. The...

Hi, Questions about distance from stabilizing pin on hitch and distance to know to tighten stablizing pin- I have an outback and my current Helium 3 rack doesnt quite fit right. It was a gift : The knob to tighten the stabilizing pin to...

I wanted to be sure this tool fits the bolt on the lock I also want. The lock combo is the 8foot Cable Lock and Anti-Rattle Hitch Lock for Saris Hitch Mounted Bike Racks, Item # SA984. While this ratchet and socket fit the bolt head? I could...