What is the Size of the Inlet on the Air Filter Intake on the Air Lift Wireless Compressor AL25980EZ
What is the size of the inlet for the air filter intake. I would like to put a “snorkel” and move the air intake to a more clean environment where dust and water is not a concern to prolong the life of the pump and components. | I was able to...
Does Curt Trailer Wiring Harness part # C58044 Fit 2005 Ford Mustang
Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 60 Wire Lead - C58044 Will this fit a 2005 ford mustang convertible | Yes, we have confirmed with Curt that their universal style trailer wiring kit part # C58044 that you referenced...
Trailer Hitch Receiver Fit for 2012 Ford Mustang Boss 302
Hello, Can you tell me which hitch you carry that fits a 2012 Mustang Boss 302? | We do have a trailer hitch receiver I can confirm is a fit for your 2012 Ford Mustang Boss 302, which is from Curt: - Curt Trailer Hitch Receiver # C11210 I...
How to Carry a Mobility Scooter on a 2004 Ford Mustang
Looking for a way to carry a mobility scooter. Hoping that I can find a hitch and carrier that will work on mustang. | The trailer hitch receiver we have for a 2004 Ford Mustang is the Curt Trailer Hitch Receiver part # C11041 which is a fit...
Parts Needed to Flat Tow a 2004 Ford Mustang GT Behind a Motor Home
I am preparing to flat tow my 2004 Mustang GT behind my recently purchased motor home. I am looking at the Roadmaster Base Plate for that vehicle. There is a notation in the info for the Blue Ox that the bumpr facia must be removed and replaced...
Ball Mount Recommendation for Draw Tite Hitch 24928
I purchased the hitch part number 24928, it has a tab about 4inch in and the pin hole is about 6inch in. How do I get the ball mount past the tab stop? | The tab you mentioned is there intentionally as a way to prevent the Class I hitch # 24928...
Hitch Recommendation for a 2007 Ford Mustang GT
I have a 2007, Ford Mustang GT. I want to get a hitch for it. Id prefer a 2inch hitch over a 1 and 1/4 size. Do you have a hitch that fits? | For your 2007 Ford Mustang GT there is only one hitch available. The Curt # C11312 is a 1-1/4 inch...
Will the ThuleOutWay Platform Bike Rack # TH65JV Fit on a 2011 Mustang with Satellite Antenna
My vehicle is a Ford Mustang 2011 V-6 Premium which has a satellite radio antenna mounted three inches down from rear window, centered. Antenna consists of a plastic, round pod 3 x 3 inches. Will the Thule Platform Rack fit over or around...
Do Dual Electric Fans Work in a 1996 V8 Jeep Cherokee?
Do we have to remove the current radiator fan in order to install 26 inch dual electric fans? | You need to remove the stock radiator fan to make room for the 26 in dual electric fans part # D16927. |
Are Diodes Required to Separate Brake Lights from Turn Signals Using Converter 118158 on Trailer
Im wiring a 91 mustang to a very small tear cargo trailer that has amber turn signals and separate brake lights. Id like to mount the converter in the back of trailer right near all the lights. See Pic. The trailer had previously been pulled...
Trunk Mount Bike Rack Recommendation for 2011 Ford Mustang GT Convertible
Looking for trunk Mount 2 bike rack to fit 2011 Ford Mustang gt convertible with a rear spoiler. I was looking at Thule Outway and saris bones 2. Any suggestions or thoughts. | Of the two bike racks you mentioned only the Saris Bones 2 bike...
Best Hitch Recommendation for a 2016 Ford Mustang Fastback for Carrying Bike Rack
I own a 2016 Ford Mustang fastback. I am interested in fitting a bike rack on the car. I did not see any trunk bike racks so I am looking at hitches and hitch style bike racks. Of the hitches for my car I prefer the Curt C11405 since it looks...
2004 Mustang Convertible White Seat Covers
Do the come in white? | Our seat cover # e99048 only comes in black. I do not have any white seat covers for your 2004 Ford Mustang. |
No-Drill Trailer Hitch for a 2012 Ford Mustang 6 Cylinder Coupe
Will this hitch fit the 2012 Mustang 6 cylinder coupe without modification to the vehicle or drilling holes? | The Draw-Tite trailer hitch, # 24863, will fit your 2012 Ford Mustang, 6 cylinder coupe. There is no drilling involved and you should...
Speed Rating of Load Star 5.30-12 Load Range C Tires
Hi, I would like to know if I am driving at 70 to 75 miles an hour will I be ok when trailering my motorcycle that weight 750+ pounds on a trailer tires max weight is 1,045 tires Load star 530-12 high speed load range C Pleas advise. Thank...
Will Thule Passage 2 Bike Rack # TH910XT Fit 2014 Ford Mustang
Tell me if the model TH910XT works with a 2014 Ford Mustang. What additional parts if any are required for proper fit without damaging car. thanks | The Thule Passage 2 Bike Rack # TH910XT is indeed a confirmed fit for your 2014 Mustang. I verified...
How Much of the Curt # C11048 Class I Receiver Will Be Visible When Installed on 2012 Ford Mustang
How much of this hitch will show, will skirt have to be cut. If installed will you only see the 1 1/4 reciever end or will it hang below the bumber and see brackets to. | When the Curt # C11048 is installed, the receiver opening and a portion...
Will the Draw-Tite Class I Trailer Hitch Fit on a 2012 Ford Mustang Boss 302
Will this hitch fit on the 2012 BOSS 302? | I spoke with my contact at Draw-Tite and the Draw-Tite Class I Trailer Hitch, # 24863, will fit on your 2012 Ford Mustang Boss 302. If you are looking to add a trailer hitch to your vehicle to carry...
Parts Needed to Flat Tow 1998 Ford Mustang 5-Speed
Can a 1998 mustang 5 speed be flat towed behind a motor home without any modification | I did some checking and your 1998 Ford Mustang with a manual transmission is flat towable as-is without any modifications. We have the parts you'd need to...
Can Cold Intakes Be Used with Superchips Programmer Installed on 2012 Ford Mustang with a 5.0 Liter
Will the flashpaq f5 work to reprogram my 5.0 mustang when adding a cold air intake? | The Superchips Flashpaq F5 Pro Programmer # SU4845 that you referenced is a fit for your 2012 Ford Mustang 5.0 liter and can give the vehicle the vehicle...
Will Curt Class I 1-1/4 Inch Hitch # C11312 Fit a 2006 Ford Mustang GT With Dual Exhaust
Still dont understand for sure if this will Fit 2006 Mustang GT. I do not have california special, nor shelby, but do have dual exhaust which doesnt appear on any of the installation photos. Im really interestedin this product, but want to...
Trailer Hitch for 2015 Ford Mustang GT
Any plans to make a trailer hitch for the new 2015 Mustang GT? I see you have them listed through 2014 but nothing for 2015 yet? Thanks! | There are indeed hitches available for the 2015 Ford Mustang GT. The best hitch for you will depend...
Will Curt Hitch part # C11041 Fit a 1997 Ford Mustang GT
According to your web site you have a hitch to fit a 97 Mustang V8. Have you installed one and would it take a Motorcycle trailer. | The Curt Hitch # C11041 is only a confirmed fit for the V6 models. It will not work on the V8 models of the...
Recommended Hitch With Easy Install For A 2012 Ford Mustang V6
I have a 2012 Mustang, V6. I would like to purchase a trailer hitch, 1 1/4inch receiver. Is one model easier to install than another? Thank you. | We currently have two hitch receivers available for your 2012 Ford Mustang V6. They are the Draw-Tite...
Filter Your Search
Contact and Help