Does Power Grip RV Temporary Power Cord Extension Require Adapters
Our Camper has a 25 foot built in cord but not long enough to connect at a particular site we like. Will this extension fit on the end without the need for a special adapter? If an adapter is needed can you recommend? | The Power Grip RV Temporary...
Trailer Wiring Harness for 2001 Mercury Villager
Is wire harness 119178KIT compatible with a 2001 Mercury Villager? | The 4-Pole Hardwire Kit with Converter, part # 119178KIT is the correct trailer wiring harness for your Mercury Villager. The kit also includes quick splices for tapping into...
Where Does a Trailer Wiring Harness Plug Into On a 1998 Mercury Villager
hi cant find the plug ,video shows installation on a truck and the van must have a different location . I checked passenger side plus both of the access pannels. just need to find the main plug please help if you have access to a wiring diagram...
Determining Which Size Hitch to Install on 2000 Mercury Villager
I see they pretty much look alike What I need to know is: once installed, can a different receiver be exchanged, like the Reece Hitch I had on another vehicle. Sometimes a 1 1/2inch ball is needed, sometimes a 2inch ball. I just want to exchange...
Does a Weight Distribution System Increase a Vehicles and Trailer Hitchs Tongue Weight Rating
I have a 2000 Mercury Villager with a 350 pound tongue rating. Your weight distribution system seems to indicate that the tongue capacity increases to 500 pounds with the addition of a weight distribution hitch installed. Is this true? Thank...
Installing Circuit Protected Taillight Converter Kit # 119178KIT on a 2002 Mercury Villager
how do i install the wiring harness on my 2002 mercury villager =nissan? thanks | I will happy to walk you through installing the Upgraded Circuit Protected Taillight Converter Hardwire Kit, # 119178KIT, on your 2002 Mercury Villager. First,...
Height Adjustable Side Mount Bolt On Trailer Jack
RDJ-2K The Ultimate Trailer Jack - A-Frame - Weld On or Bolt On - Topwind - 27-1/2 Travel - 2,000 lbs Do you have one of these that is a side bolt on, kind of like a swivel type but not a swivel type. Thanks | The side mount bolt on ARK Xtreme...
2011 Jayco Jay Feather Tire and Wheel Replacement Recommendation
2011 Jayco Jay Feather tire and wheel replacement Just bought this camper and prior owner thinks these tires are original so Im thinking of replacing them. They are.. ST205/75 R14 The tire says Do Not Mount on a 14.5 inch Rim Load Range...
Recommended Cover for 22' Jayco Travel Trailer for 6 Months Storage in Connecticut
always have had a adco cover the item # 290-52242 looks good, it says for rain and snow, but to be used between trips. well i am covering it for 6 months threw the winter, is it ok for that length of time, this is not short term, i like that...
Availability Of Lift Kit For 2011 Jayco Jay Feather Ultra Lift W/ # 10 Dexter Torflex Axle
Do you guys have a lift kit that is bigger then 2 5/8?this trailer has no clearance and Im replacing Jacks all the time. | Since your 2011 Jayco Jay Feather Ultra Lite X17Z has a # 10 Dexter Torflex axle the only lift kit available for it is...
Is Hardware Needed for Installation Included with Trailer Hitch # 75102 for a 2002 Mercury Villager
mercury villager 2002 have already received hitch. question: are BOLTS included? if not, what size do i need? will look closely to see if bolts are tape to hitch or included in packaging, but on quick inspection, could not find bolts. thanks...
Timbren Axle-Less Trailer Suspension System Recommendation for a 1977 13 ft Scamp Trailer
I have a 1977 13 foot Scamp trailer with a dexter torsion axle and would like to replace the axle with a timbren axle less suspension system. Has this been done before and how well does it work. The trailer is about 1600 lbs with camping gear...
Does the Timbren Rear Suspension Enhancement System # TFVR001 Work Only When Loaded
does this suspension work only with load | The Timbren Heavy-Duty Rear Suspension Enhancement System, part # TFVR001, that you have referenced, is the correct part for your 2000 Mercury Villager. It is designed to attach to the vehicles frame...
Is There a 2 Inch Trailer Hitch for a 2000 Mercury Villager
Hello, Do you have this in a 2inch Receiver? My Vehicle is a 2000 Mercury Villager. | Yes, we have a class III, 2" trailer hitch for a 2000 Mercury Villager, it is the Curt Class III Receiver Hitch part # C13572. This is a fully welded trailer...
Parts Needed to Tow a 1995 Mercury Villager Behind a Motorhome
I need a tow bar that will fit my 1995 mercury villager minivan. I want to tow my minivan behind my 28ft motorhome down the coast. What product will work? Thanks | From my research a 1995 Mercury Villager cannot be flat towed with all 4 wheels...
Filter Your Search
Contact and Help