4runner x > Attitude 5W Toy Hauler x >

Recommended Hitch for 1998 Toyota 4Runner

Hello i have a customer that is looking to put a front mount on his 1998 4 runner is this 65041 going to work on that vehicle i have been having a very hard time finding one found the warn front receiver but customer does not want to pay that...

Comparing Furrion and Greystone Fireplaces for RVs

What wall mount fireplace is the best brand,Graystone vs Furrion ? | I'd recommend the Furrion fireplaces over the Greystone. In general we see far fewer troubleshooting questions about the Furrion fireplaces having issues than the Greystone...

Brake Controller and Installation for a 2014 Toyota 4Runner

The wiring adapter that came with my 4Runner has a green headlamp switch to vehicle tail lamps and a green-yellow wire vehicle stop lamp switch to brake controller input. There are no corresponding wires on the universal wiring harness did...

Will a Yakima SkyBox 16 Fit the Rhino-Rack Storage Rack for Kayak or Cargo Box - Wall Mount - RRRWHL

Will a Yakima SkyBox 16 fit on a Rhino-Rack Storage Rack For Cargo Boxes # RRRWHL | I checked the specs on the Yakima SkyBox 16 and it looks like it has an overall height of 15 inches so it will fit the Rhino-Rack Storage Rack for Kayak or...

Color Options for LED Adjustable Reading Light for RVs

Does it come in a brass or gold type finish? | The LED Adjustable Reading Light for RVs come in silver part # CE46FR and black part # CE66FR but these are the only color options. |

Can a Vehicle Side Trailer Connector be Mounted so that it is Facing the Ground

Is there any reason why a trailer connector should not be mounted so that it faces downward toward the ground? | If the vehicle side trailer connector is pointed towards the ground then what can happen is the increased likelihood of debris and...

Trailer Hitch that Fits 2020 Attitude Toy Hauler 3322SAG

i measured out the distance of the frame I-beams they come out to 74.5inch inside of the beam to the inside of the i-beam. i was looking at the curt but i dont think it will be quite long enough so Im wondering if this part # UF35-946403 would...

Recommendation On Equal-i-zer Weight Distribution HItch

I want to know if EQUL-I-ZER Weight distribution hitch, part number, EQ37121ET, Will fit 2 1/2” shank part number, EQ90-02-4800. | When it comes to The Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200...

Upgraded Equalizers and Shackle Straps for a 2017 Eclipse Attitude 5th Wheel Toy hauler

I have a 2017 Eclipse Attitude 5th wheel toy hauler. My current equalizer is stamped 13-104 on one side. It has 2 7000# axles and axle spacing is 33. What would I use as an upgraded shock absorbing equalizer. Equalizer bolt is 3 x 9/16th...

Front Mount Trailer Hitch for a 2014 Toyota 4Runner

What front mount hitch can you recommend for the 2014 Toyota 4runner? | For your 2014 Toyota 4Runner you can use Curt front mount hitch # C31054 that you have referenced. It fits both 2-wheel drive and 4-wheel drive models. It does not fit the...

Roof Rack Recommendation for Roof of Enclosed Cargo Trailer

I am interested in putting a rack system on a enclosed cargo trailer I own. I want to install a roof-top tent. see: On the rack. The weight of the roof-top tent is 128 lbs, Do you have a recommendation? Thanks | For an enclosed cargo trailer...

Front Hitch Recommendation for 2016 Toyota 4Runner Trail

Im interested in a front mount hitch for a 2016 4Runner Trail model. Your web site shows a front hitch for 4Runners excluding the trail model. The Curt web site show a different model hitch - Curt #31076 which apparently does fit the 2016...

Should Weight Distribution be Set Up Before or After Inlflating Air Lift 1000 Springs on Ram 1500

I just installed the Airlift 1000HD AirBags. I am wondering when should I inflate the bags. Before Hitching? After hitching, BUT before setting the weight distribution bars? Or after hitching AND setting the weight distribution bars? | Thank...

Will the Equal-i-zer Shank # EQ90-02-4800 Work with the Equal-i-zer # EQ37121ET Hitch?

I want to know if EQUL-I-ZER Weight distribution hitch, part number, EQ37121ET, Will fit 2 1/2” shank part number, EQ90-02-4800. | Yes, the Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW #...

Will Yakima Skybox 18 Fit 2017 Toyota 4Runner and Allow Rear Hatch to Open

Guys Will a Yakima Skybox 18 fit on a 2017 toyota 4Runer without interference from the rear door when fully open? | Measure the distance from the middle of the front crossbar rearward to the seam between the roof and the top of the rear hatch....

Equalizer Upgrade Kit For 2018 Eclipse Attitude 5TH Wheel Toy Hauler

I have a 2018 Attitude 32sag. I want to upgrade the shackle suspension set up. I dont have much space between my axles 33. They are 7,000-pound axles. Will these fit? Thanks | The Dexter E-Z Flex Suspension Kit # K71-653-00 is designed for axles...

Thule Roof Box for a 2016 Toyota 4Runner with Factory Roof Rack and Crossbars

Hello - I have a 2016 Toyota 4Runner SR5 with a factory roof rack and cross bars. I am looking at twoThule roof boxes The Force XXL and Motion XT and am wondering if these will fit on the factory cross bars while still allowing me to fully open...

Replacement Igniter and Burners for a Furrion 3-Burner Stove

Hello im looking for a few items for a furrion 3 burner stove top igniter and the 3 igniter wires Furrion part numbers are C-FSRE21SA-020///IGNITER C-FSRE21SA-004///L.H BURNER C-FSRE21SA-005/MIDDLE BURNER THANKS | We do have the replacement...

<< Back to Results

Filter Your Search