Can Ultra-Fab Ultra Scissor Jacks Be Used without Leveling Blocks
I have a 22.5 ft, 3900 dry weight travel trailer and find backing it on to leveling blocks very difficult. If I use 4 leveling jacks, one for each corner, would I still need to use leveling blocks? | The # UF48-979002 feature oversized footplates...
Recommended Product for Use Under Jack Foot on Soft Ground
Can 2x10 wood pieces normally used under most stabilizing jacks be fastened to the Lippert Power Stabilizer Jack feet to keep the feet from sinking into the ground? It would be nice not to have to stow extra wood when travelling. | Lots of RVers...
Recommendations for Improving Stability of Travel Trailer at Campsite
Good evening , We have a Heartland Mallard M335 Weight is almost 10,000 pounds 39 feet long . It has Electric stabilizers but will not lift at all and it’s still a lot of movement. It also has 3 slides . We would love your Recommendation....
Can Lippert Components Stabilizer Jack Work On A 1987 Avion Travel Trailer?
Will the Lippert components stabilizer work on an 1987 Avion ? Also, does both sides need to be level ground for the two arms to work effectively? | The Lippert Components High-Speed Power Stabilizer Jack - 30" Lift # LC298707 which includes...
Operating Instructions For The Stackers Leveling Blocks
I noticed that the one video showed using the blocks under only one axel. Isn’t it bad to shift all of the weight from the two axels on to the one axel? | I believe you're talking about the video I have attached of the Stackers Leveling Blocks...
Are There Larger Foot Pads To Use On RV Scissor Jacks
Will these plates fit on standard TT scissor jacks? | I do have an option for you but the Ultra-Fab Footplate for Landing Gear and Stabilizer Jacks part # UF17-940006 are made for landing gear legs, not scissor jacks. That said, they don't really...
Do Stackers Leveling Blocks # A10-0920 Have to Be Used Under a Trailer Jack
Do you need a jack to use the stackers | The Stackers part # A10-0920 can be used under jacks/stabilizers but can also be used under the wheels of a vehicle to level. I attached a picture that shows this as well. |
Can Stackers Leveling Blocks A10-0918 Be Used with 5th Wheel Landing Gear
at max height can these be used under landing gear of a fifth wheel | Yes, the Stackers Leveling Blocks # A10-0918 can be used under wheeled tongue jacks, stabilizers or 5th wheel landing gear to give you an instant height gain. They also provide...
Comparing the Ultra-Fab and Stackers Leveling Blocks
I have 1 pack of lynx leveling blocks? Would ultra-fab be compatible with these if I need more height? | The Lynx Leveling Blocks you have will not work with the Ultra-Fab Leveling Blocks part # UF48-979051. The reason for this is that the surface...
Can Arms of the Reese Steadi-Flex be Installed by Hand
For some reason, even though I run my jack up reasonably high, the spring bars on my Reese RP66560 cannot be put on or removed without the leverage wrench provided by Reese. Ive seen some of the videos where these bars can be put on by hand...
Stackable Leveling Block Solution for 40 ft Fifth Wheel
I was wanting to know which blocks you would recommend for a 40ft fifth I generally put one solid cement block on each leg in front and I have two solid cement blocks on each of the back, I like your extreme you sell not sure if they can hold...
Dimensions of Stackers Leveling Block # A10-0917
Regarding product Item # A10-0917, the description sounds like it is 4 inches tall but nothing else confirms that. are these just singles of the 8x8x1.5 or are these actually taller? Is so, what are the pad dimensions? Thank you. | The Stackers...
Stackable Block Solution for Center Jacks of Lippert Ground Control System
I recently bought the 6 point Lippert System for my 2005 Weekend Warrior 40 Fifth Wheel Toy Hauler. I was able to install it with some custom brackets and installing the electric motors above the floor. Now I need legs or extra blocks.... The...
How to Create a Larger Footprint on an RVs Leveling System for Soft Ground
I have a class A motor home with hydraulic leveling system, looking for blocks to put under the leveling pads to distribute the load over wider area when on black top or softer ground. What would be a good choice? | I have exactly what you will...
Are There Leveling Blocks Wider Than 8-1/4 Inches?
Hi, I would like to buy some Leveling blocks, but I was hoping you had a size that was a bit wider. Do you have anything wider then 8-1/4? About 12 to 16 The one I saw on your website is Item # UF48-979052. If you do have something wider...
Axle Ground Clearance Needed For TrailerLegs Tire Saver Stands
What is the required distance from the ground to BDC Bottom Dead Center of the axles? I want to make sure these will work? | The TrailerLegs Tire Saver Stands - Tandem Axle # 326-TRLLG-4 have overall dimensions of 15" long x 8" wide x 19"...
Recommended Leveling Blocks for RV with Closely Spaced Tires
I see a similar question answered stating a linked video that I do not find. I see regular video but I need to see how it can work when there is no room for a needed 2nd set on double axle 5ers rear axle. With them being 15inch long and 4inch...
How Much Can the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System Raise the Trailer
Can I raise my self leveling jacks higher then 9 inches | In regards to the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part # LC358590, the front jacks have a 21" travel and the rear jacks have a 12-1/2" travel. If you...
Option for Spreading Out Weight of Foot of Lippert Stabilizer Jack # LC298707
Can LC314667 be used on Lippert High-Speed Power Stabilizer Jack? Wanting a bigger foot print on the rear stabilizing jacks. | There isn't a larger foot plate you could install on the # LC298707 that you referenced and the foot you did mention...
Will the Lippert Components 5th Wheel RV Landing Gear Foot Pad LC314667 Fit My Landing Gear Legs
Will a Lippert Components 5th Wheel RV Landing Gear Foot Pad LC314667 fit a 2016 Outdoors RV Glacier Peak 5th Wheel that has the rectangular footpad? The leg exterior measurements are 2 x 2. I’ve tried the Lippert landing gear lift foot pad...
Troubleshooting Out of Stroke Error on LCI Ground Control Auto Leveling System
Our 2014 Columbus 320rs auto leveling device is show a message: Error—- out of stroke. We do not have truck here so we canno hook up. Rv needs to auto leveler to work- is not level now. Do you have any advice. I’m afraid to punch again....
Do Stackers Need to be Used on all Three Axles on Triple Axle Toy Hauler?
I have a triple axle toy hauler. Can I use the red stackers on the front and rear axles only to work or should I stack all three axles? | That's an interesting question, but leveling blocks such as # A10-0918 should be used on all three axles...
Availability of 5,000 lb Sidewind A-Frame Jack
I need an A Frame bolt on side wind 5000lbs manual trailer tongue Jack. There are several choices, but I need one that is durable, reliable, and long lasting. The one that came on my travel trailer only lasted 2 1/2 years, and failed on a...
How Can I Make My Trailer Jack Stand Taller
Is there anything taller than this? I have my tongue jack fully extended with over 8inch of blocks under the jack and still having a hard time removing my WDH bars. | I have a solution for you, but the Valterra # A10-0900 is going to be the...
Filter Your Search
Contact and Help