How Sturdy Is The Mount On The MaxxTow Off-Road Driving Lights?
How sturdy is the mount on this light? | The mount on the MaxxTow Off-Road Driving Lights # MT80637-2 itself is very sturdy. It is intended/designed for off-road driving conditions where the idea is durability. These lights can mount well...
7-Way Trailer Connector Installation in 2008 Mercury Mountaineer
I have a 2008 Mercury Mountaineer with factory 4 pin wiring and I need to install a 7 way connector for my new camper. Please advise what products I will need. Thank you. | We have exactly what you need. Kit # ETBC7 contains all of the parts...
Replacement Slipper Spring for Boat Trailer 1000-lb Axle
The spring that I took off of the trailer measures about 25 and 1/4 inch. and 1 and3/4 in. wide, The bolt hole measures 1/2 inch had a 1/2 inch bolt. This looks like the 24 and 1/4 inch slipper spring for 1000 lb axle. It says that the bolt...
Weight Distribution System Recommendation for 2,900 lb Trailer
I have a travel trailer that weighs 2900 dry weight. My factory hitch on my 2010 mercury mountaineer AWD is rated for 500 tongue weight and rated to pull up to 5000. What size weight distributing hitch is appropriate? 6000/600, 8000/800, or...
Brake Controller Installation Recommendation for a 2010 Mercury Mountaineer
2010 mountaineer class 3 hitch installed by Curt. Put a 7 pin wire plug in. Purchased the factory wire harness plug from the brake Prodigy. Do I need to run the wire from the brake controller to the 7 pin Wire plug. Or did Mercury install...
Roof Kayak Carrier Recommendations for a 2005 Mercury Mountaineer
I have a 05 Mercury Mountaineer V8 and 2 kayaks. Can I use two sets of the carrier ? One set on each side of the suv. If using only one set, its a pretty far reach for me to tie one kayak to the back side of the carrier, while the front side...
2002 Mercury Mountaineer Brake Controller Port Location and Install Harness
I have a 2002 Mercury mountaineer with the factory tow package. I bought a trailer brake but I cannot find the pigtail that is supposedly under the dash somewhere. Can you help me as to where the pigtail would be located in my vehicle? | The...
Replacement Strap with Nut and Bolt for Dutton Lainson Winch
What bolt size would be the right one to install the strap to the winch it is a dutton lainson 2500lb winch. Thank you | Instead of the part # IMF14211 I have a better solution for you. Check out the part # DL24250. This is a 25 foot long strap...
Can a Trailer Hitch Adapter Be Used to Carry 2 inch Cargo Carrier oa a 2005 Mercury Mountaineer
Can I use a 11/4 to 2 hitch adapter on my 2005 Mercury Mountaineer to acommodate this larger basket? | There are two good recommendations for you but I would not recommend using a hitch adapter to carry a 2 inch shank cargo carrier in a 1-1/4...
Transmission Cooler Radiator Adapter Kit for 2007 Mercury Mountaineer 4.0 V6
Where does this adapter attach? I need one that will go into the radiator transmission cooler that has a harness end. | The Derale Radiator Adapter kit # D13025 is intended to connect to 5/8-inch fittings in the radiator of your 2007 Mountaineer....
Parts Needed to Add Trailer Brake Controller to 2005 Mercury Mountaineer with 4-Pole Flat Connector
Hello I need to add a trailer brake controller to my 2005 Mercury Mountaineer. It currently had just a four flat connector, can you please tell what all I will need to complete this setup. | Brake controller installation on your 2005 Mercury...
Hitch Recommendation for 2005 Mercury Mountaineer for Carrying Mobility Scooter Carrier
I have mobile chair carrier loaded on a 2005 mercury mountaineer The hitch is 1-14 hole the carrier has larger connection arm so I got an adaptable hitch to fit I am carrying an electric mobile chair very heavy maybe 200-300 lbs. Seems OK...
Will the Rhino-Rack SG Roof Rack for Rain Gutters Fit My 1998 Volvo S90?
Is this for Jeep’s only, or will it work with vehicles that have rain gutters. 98 Volvo S90 | I have a solution for you. The Rhino-Rack SG Roof Rack for Rain Gutters - Vortex Aero Crossbars - Aluminum - Black # RRSG59 will only fit certain...
Brake Controller Recommendation for 2008 Mercury Mountaineer
Hi, We purchased a new Casita 17foot RV that we pick up next year. We are towing with a 2008 Mercury Mountaineer with the already installed Tow package and 7 pin hookup. But we were told we should also get a Brake Controller also for the...
Should Disc Trailer Brakes be Added to Front or Rear Axle on a Boat Trailer
I have a tandem axle boat trailer, its an EZ Loader trailer without brakes. I believe its capacity is 4100 lbs. I have a Starcraft 22 ft aluminum hulled boat that I have towed for many years. I want to add disc brakes, can I just install...
Where Does Hopkins Trailer Wiring Harness HM40915 Plug in on a 1999 Mercury Mountaineer
Is it possible for the mercury Mountaineer 1999 have 2 plugs. Under the rear bumper there is 1 on each side. Can I use either one of these? | On 1999 Mercury Mountaineers that came with a factory tow package the connector you need will be the...
Can Draw Tite Hitch for 2000 Mercury Mountaineer be Used with Weight Distribution System
Can you use weight distribution bars with this hitch on a 2000 Mercury Mountaineer? | Yes, the Draw Tite hitch part # 75096 which fits your 2000 Mercury Mountaineer is rated for use with weight distribution systems. The best way to pick out...
Replacement Nerf Bar Pads That Are 21-1/8
Hello, i am looking for replacement step pads for my dads SUV. he owns a 2007 mercury mountaineer. the Nerf board is wheel to wheel. the pad is 3 inches wide and 21 1/8th inches long, according to my father, and i need to purchase four. he does...
Trunk Mount Bike Carrier for a 2008 Mercury Mountaineer and Volkswagen Jetta
We have a Mountaineer and a VW Jetta, which is the best to use on the two. reading different views on them. | For a trunk mounted bike carrier that will fit both your 2008 Mercury Mountaineer and Volkswagen Jetta I recommend the Hollywood Racks...
12 Volt Circuit Does Not Work on a 2002 Mercury Mountaineer
ok in my 2002 mercury mountaineer i am trying to connect my boat trailer but i am not getting the 12 volt at the adopter that come attach to the suv is a 7 way plug the only 12 volts i am getting is went i put my head lights on... i am using...
Parts Needed to Install Brake Controller on 2008 Mercury Mountaineer
Have a 2008 Merck Mountaineer with class III/IV tow pig. and 7000#GVW Hallmark with electric brakes There was connector in Merc with 6 female receptacles loose in the glove box What do I need to utilize the trailer brakes. Is there a interface...
Will CTM2200A Towing Mirrors Fit a 2000 Mercury Mountaineer With Courtesy Lights
Will your custom trailer mirrors work? | If the courtesy lights on your 2000 Mercury Mountaineer are located beneath the mirror face, towing mirrors # CTM2200A will not be able to slide on. You are able to view the mirror housing styles the...
Can Stromberg Carlson Lift Back of 2007 Mercury Mountaineer & Trailer to Install Weight Distribution
I HAVE AN 07 MOUNTAINEER V8 PULLING A 91 JAYCO 28 FT TT WITH A EQALIZER HITCH..I HAVE TO JACK UP THE TT AND TV [ TT ATTACHED TO TV] TO INSTALL THE ANTI SWAY / WEIGHT DISTRIBUTION BARS. WILL THIS JACK WORK FOR ME? IT WILL HAVE TO LIFT THE TONGUE...
Can a 2 Inch Diameter Ball be Added to Pro Series Weight Distribution System # PS49583
The information shows for a 2 5/16 ball can it be switched to a 2inch ball | The Pro-Series weight distribution system # PS49903 comes with 1-1/4 inch diameter hitch ball hole. For a 2 inch ball you would need to add # A-90. Both the 2-5/16...
Filter Your Search
Contact and Help