Recommended RSSA Steering Stabilizer For A 2022 Entegra Emblem 36U Class A Motorhome
Dos the roadmaster RSSA steering stabilizer fit on my 2022 Entegra F53 V8 engine emblem 36U | For a 2022 Entegra Emblem 36U on a Ford F-53 Chassis the RSSA # RM62VR as well as the Exact Center # RM82RR that you were looking at would be a compatible...
Bike Rack Rated for Use on a RV
We have a short 28 foot long motorcoach that has a rear basement compartment with a swing door. We dont want to have to remove the bikes every time we need access to the basement. This coach is shorter than most but rear bounce still might...
Roadmaster Steering Stabilizer for Class A Motorhome Built on 2003 Ford F-53 V8 Chassis
I am trying to compare the Safety Plus stabilizer with the Roadmaster stabilizer. Which one is the best for my Class A motor home? | If your Class A motorhome is built on a 2003 Ford F-53 chassis then we offer one option in a steering stabilizer,...
Steering Stabilizer Fit for 2012 Winnebago Itasca on Ford F-53 Chassis
I have a 2012 winnebago itaska Sunstar 32foot which stabilizer is appropriate | I checked with Roadmaster and can confirm the correct steering stabilizer for your 2012 Winnebago Itasca Sunstar, which was built on a Ford F-53 chassis: - Roadmaster...
Anti Sway Enhancement For 2021 Allegro 32 SA Motorhome
I have a 2021 Allegro 32 SA and I want to install front and rear anti sway bars. Can you tell me the part numbers for these anti sway bars? | We have what you need. I recommend the Roadmaster Front Anti-Sway Bar # RM-1139-148 and the Roadmaster...
Is It Normal For the Roadmaster Front Anti-Sway Bar # RM-1139-148 to Slide Inside the Mounts?
I just installed a front anti sway bar kit 1139-148 on a 2015 f53 chassis . I torqued the bar were the greased bushings are and I also I noticed that when I tightened them there is a small amount of movement is this correct? When I took it for...
Recommended Jounce Springs for Two-Wheel Drive 2019 Ford F-53 Chassis
I have a 2wd motorhome with a 2019 ford f-53 chassis. i am looking for jounce springs and was wondering what was recommended for me that would fit. | The jounce springs I recommend for your two wheel drive 2019 Ford F-53 chassis are from SumoSprings,...
Recommended Hand Rail For 2017 Triffin Motorhome Steps
Have a 2017 tiffin motor home with two retractable steps. Which model hand rail would best be siuted for this rv.? | For your 2017 Triffin Motorhome with two retractable steps, I recommend the Lend-a-Hand Folding Grab Handle for RVs - White...
Combining SafeTPlus with SumoSprings Suspension and Roadmaster AntiSway Bars on a 2020 Thor Ace 27.2
Hello, Ive read and watched a lot about the 3 mentioned driving performance improvement, but i havent seen or heard anyone with all three combined. Ive already installed the SafeTPlus and do agree with the influencers on the improvement. ...
Installing a Towed Vehicle Battery Switched Charging Line on 2016 Ford F53 Chassis Motorhome
What parts and instructions do I need to install a charging line for my toad in my 2016 Coachmen Mirada 35LS? Specifically need to know where to tap into the F53 wiring for a switched line. | For your 2016 Coachmen Mirada 35LS, to find a switched...
Installation Instructions for part # RM-4139-125
Hello, I discovered the bushings on my 1999 Fourwinds Infinity V10 F53 motorhome where gone. I could move the bar around in the bushing holder. I was trying to view the installation instructions on your website but it would not work. Could...
What Is The Tongue Weight Capacity Of the Draw-Tite Trailer Hitch Receiver # 41990-07?
Is this hitch capable of holding a motorcycle carrier with a bike about 1200 lbs. Thank u | The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 is capable of supporting up to 1,600lbs of tongue weight. I do recommend verifying...
Recommended Anti-Sway Bars For A 2019 Ford F-53 Chassis
I have a 2019 Ford f53 24,000lb chassis under Tiffin 32SA. What are the correct sway bar options for this chassis? Are they all the same diameter? | For a 2019 Ford F-53 chassis you would need the Roadmaster Rear Anti-Sway Bar # RM25VR for the...
Steering Stabilizer Fit For 18,000 lb 2005 Ford F-53 Chassis
Have a 2005 f53 chassis what steering stabilizer do i need? 18k gvwr | I checked with Roadmaster and found the correct steering stabilizer for your motorhome on a 2005 Ford F-53 chassis with an 18,000 lb GVWR, which is the following part number: -...
Recommended Awning for 73" Wide Slide Out with 33" Projection
Correct model number black | The Solera RV Slide-Out Awning # LCV000165063 is the correct topper for you since it will work on slide outs with a projection of up to 48". There is not one available specifically for 33" projection, but will work...
Multi-Fit Motorhome Trailer Hitch For 34 Inch Wide Ford F-53 Frame
is this hitch fit with my ford f-53 frame 34 inches and also good Drawn-tite # 5359. is the distance between the bolts 5 inches is a problem for both Reese and Drawn-tite | The hitch you referenced, the Draw-Tite Multi-Fit Motorhome Trailer...
Trailer Hitch Receiver for Motorhome on 2006 Ford F-53 Chassis
I look for a hitch receiver for Monaco Monarch 33 pbd 2007 with a 2006 Ford f-53 stripped chassis | There is a potential option so you can install a trailer hitch on your Monaco Monarch, though there is nothing that is a direct, custom-fit for...
Front and Rear SumoSprings that Fit 2023 Fleetwood Flair 29M with 18k GVWR
Hello, I am interested in purchasing front Sumosprings for my 2023 Fleetwood Flair 29m V10 F53, 18,000GVWR I am confused as some people say a kit for this chassis isnt available yet others say that the SSF-171-40-2 will work. If no kit is...
Correct SumoSprings for a 1999 Georgie Boy Class A Motorhome on Ford F-53 Chassis with 18K GVWR
What model sumo spring will fit my 1999 Georgie Boy ford F53 rv camper? 18000 gvwr | The correct SumoSprings Custom Helper Springs for a 1999 Georgie Boy Class A Motorhome on Ford F-53 Chassis with 18,000 GVWR is part # SSF-172-40-2 for the...
Replacement Motor for Kwikee 32 Series Steps on 1999 Winnebago Motorhome
I have a 1999 Winnebago Cheiftan with electic Kwikee Steps. The pot metal swing arm cracked and I need a replacement arm. Since they dont make those, I am forced to purchase acontrol unit. The 379160 is not the correct unit as the motor drive...
Does the Mounting Bracket on Draw-Tite # 75155 Relocate the Factory Wiring on a 2007 Lexus GX470
Question: My 2007 Lexus GX470 has a factory 7 pin trailer wiring harness. Does the U shaped bracket on this Draw-Tite hitch allow for relocating that harness and plug to make it easily accessible? Also can you recommend which 7 way to 4 way...
Front and Rear SumoSprings for 2012 Thor Challenger 36FD Motorhome
Need confirmation of what part number will fit my Challenger before ordering. my coach GVWR is rated at 22000 lbs. Somewhere I was reading that the F53 chassis on my Challenger that one part number would not fit due to the rear chassis wiring...
Will the Primus IQ Part # TK90160 Work on my 2018 Ford F-53 Chassis
Will a tekonsha 90160 for 1to 3 axles work on my 2018 f-53 thor motor coach | Yes the Tekonsha Primus IQ Trailer Brake Controller Part # TK90160 will work on your 2018 Ford F-53 using the pigtail part # 3035-P . I would instead recommend using...
Brake Controller Wiring Harness Connector Location on a 2016 Ford F-53
Can you tell me where the electric brake controller wiring harness connector is for a 2016 Ford F53 chassis. | The location that you will plug the wiring adapter, part # 3035-P, for the Tekonsha Prodigy P2 # 90885, in under the driver's side...
Filter Your Search
Contact and Help