Is there a Hole to Route Trailer Wiring Harness on a 1990 Ford LTD Crown Victoria
My car has the tow package says theres a 32 mm hole by rear 1/4 panel for wires to go through,i dont see it. Have you ever worked on one of these is it possible they didnt put the hole and plug in the vehicle? | We haven't had a 1990 Ford Crown...
Parts Needed to Install a Brake Controller in a 2012 Acura ZDX
Will this harness, part # C56108, also interface with and control electric braking on a single axle trailer? Application is a 2012 Acura ZDX. | The Curt Wiring harness part # C56108 that you referenced is needed to install and use a brake controller...
European 7-way Round Pin to 4-Pole Flat Trailer Connector Adapter
Hi, Does this 4 to 7 pole connector also enables my brakelights and taillights on my trailer? Kind regards | If your vehicle has a combined taillight system, in which the turn signals and brake lamp signal are carried on the same circuit,...
Trailer Spindle Got a Nick In it from a Grinder Should the Axle be Replaced
I was grinding the bolts off my trailer I slipped and put a nick in the spindle is it ok or do I need to replace it or the axle? | How deep is it? It is hard to tell from the picture. You may be able to use some emery cloth and take care of...
How White is the Light Produced by the Opti-Brite LED Interior Light # ILL08COB
Do you know what the Kelvin rating is on this light, Trying to determine if its pure white light or more towards the blue light spectrum that would be around 6000K. Also I did not see an on off switch. Would expect one on a light in this price...
Trunk Bike Rack Recommendation for a 1990 Ford Crown Victoria
I have an older car I tease my sister tell her my bike is worth more than my car it is a 1990 ford crown Vic need a trunk rack for female bike will this work? | The Thule Passage bike rack part # TH910XT that you referenced has been confirmed...
Exhaust Modifications for 2001 Ford Crown Victoria with Dual Exhaust
This hitch for the crown vic says dual exhaust needs to be modified. What are the modifications that will need to be preformed as I have a p71 police interceptor that I would like to put a class 3 with 2 reciever on. | In order to clear the...
2 inch Hitch that Fits 1989 Ford LTD Crown Victoria
I have a 1989 LTD Crown Victoria I would like to pit a Draw Tight Hich 2inch what model would you guys recommend Thanks | For your 1989 Ford LTD Crown Victoria we have the Draw Tite Hitch # 41116 as a confirmed fit for a Class III 2 inch hitch. |
Filter Your Search
Contact and Help