When to Check Bearings and Brakes on a 2020 Coachmen 257BHS Travel Trailer
I have a 2020 Coachmen 257BHS travel trailer with ez lube axles and never adjust brakes. How often time or miles do I need to lube the axles ? How often do i need to replace the bearings ? How often do I need to replace the brakes. Most of...
Replacement Bearing Kit for Freedom Express Liberty Edition 292BHDSLE
Hello, Im trying to find a bearing and seal kit for my Freedom Express liberty edition 292bhdsle travel trailer with 3500 axles I pulled a number off of my outer bearing L44469 and seal 010-019-00 Im not sure if those are actual part s or...
Recommended Replacement Spring for a 2021 Coachmen Freedom Express Travel Trailer
Hello. We have a 2021 coachmen freedom express 192rbs travel trailer. One side sags by 1.5 to 2 inches and i have this impression that the factory springs were spec’d to the very bare minimum for the weight of the trailer. I don’t see any...
Suspension Enhancement Recommendation for 2018 Ford F-350 with Fifth Wheel Rail Kit
Hello, I have a 2018 F350 SRW with overload factory springs and sway bar with aftermarket rail kit purchase from etrailer. I would like to know if the Firestone airbags would work with these options? | We have suspension enhancement that does...
Mounting Hole Dimensions of Epicord Battery Disconnect Switch
I’m replacing a similar switch with a faceplate on an existing trailer and would like to know the distance between mounting screw holes both horizontal and vertical to verify commonality. Can you provide this please? | Hey Steve, the mounting...
Replacement Leaf Springs and MORryde CRE3000 for 2021 Coachmen Freedom Express 292BHDSLE
Im looking to upgrade my leaf spring suspension and hardware due to one of my leaf springs flattening out and a couple more are starting to go flat. I have a 2021 Coachmen Freedom Express 292bhdsle. Im hoping you guys would have a complete leaf...
Measuring for the Gooseneck Hitch Ball Hole on a 2018 Ford F-350
I have a 2018 f350 4wd with a 6 3/4 ft box. I have the 1117 turnover hitch and will be installing it soon. I have measured the 45 1/2 inches from the rear of the bed and it falls 5/16 of an inch short of the dimple that is stamped in the...
Filter Your Search
Contact and Help